ciderpress/nufxlib/Compress.c

402 lines
14 KiB
C
Raw Normal View History

Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
/*
* NuFX archive manipulation library
* Copyright (C) 2000-2007 by Andy McFadden, All Rights Reserved.
* This is free software; you can redistribute it and/or modify it under the
* terms of the BSD License, see the file COPYING-LIB.
*
* Compress data into an archive.
*/
#include "NufxLibPriv.h"
/* for ShrinkIt-mimic mode, don't compress files under 512 bytes */
#define kNuSHKLZWThreshold 512
/*
* "Compress" an uncompressed thread.
*/
static NuError Nu_CompressUncompressed(NuArchive* pArchive, NuStraw* pStraw,
FILE* fp, uint32_t srcLen, uint32_t* pDstLen, uint16_t *pCrc)
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
{
NuError err = kNuErrNone;
/*uint8_t* buffer = NULL;*/
uint32_t count, getsize;
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
Assert(pArchive != NULL);
Assert(pStraw != NULL);
Assert(fp != NULL);
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
Assert(srcLen > 0);
*pDstLen = srcLen; /* get this over with */
err = Nu_AllocCompressionBufferIFN(pArchive);
BailError(err);
if (pCrc != NULL)
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
*pCrc = kNuInitialThreadCRC;
count = srcLen;
while (count) {
getsize = (count > kNuGenCompBufSize) ? kNuGenCompBufSize : count;
err = Nu_StrawRead(pArchive, pStraw, pArchive->compBuf, getsize);
BailError(err);
if (pCrc != NULL)
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
*pCrc = Nu_CalcCRC16(*pCrc, pArchive->compBuf, getsize);
err = Nu_FWrite(fp, pArchive->compBuf, getsize);
BailError(err);
count -= getsize;
}
bail:
/*Nu_Free(pArchive, buffer);*/
return err;
}
/*
* Compress from a data source to an archive.
*
* All archive-specified fields in "pThread" will be filled in, as will
* "actualThreadEOF". The "nuThreadIdx" and "fileOffset" fields will
* not be modified, and must be specified before calling here.
*
* If "sourceFormat" is uncompressed:
* "targetFormat" will be used to compress the data
* the data source length will be placed into pThread->thThreadEOF
* the compressed size will be placed into pThread->thCompThreadEOF
* the CRC is computed
*
* If "sourceFormat" is compressed:
* the data will be copied without compression (targetFormat is ignored)
* the data source "otherLen" value will be placed into pThread->thThreadEOF
* the data source length will be placed into pThread->thCompThreadEOF
* the CRC is retrieved from Nu_DataSourceGetRawCrc
*
* The actual format used will be placed in pThread->thThreadFormat, and
* the CRC of the uncompressed data will be placed in pThread->thThreadCRC.
* The remaining fields of "pThread", thThreadClass and thThreadKind, will
* be set based on the fields in "pDataSource".
*
* Data will be written to "dstFp", which must be positioned at the
* correct point in the output. The position is expected to match
* pThread->fileOffset.
*
* On exit, the output file will be positioned after the last byte of the
* output. (For a pre-sized buffer, this may not be the desired result.)
*/
NuError Nu_CompressToArchive(NuArchive* pArchive, NuDataSource* pDataSource,
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
NuThreadID threadID, NuThreadFormat sourceFormat,
NuThreadFormat targetFormat, NuProgressData* pProgressData, FILE* dstFp,
NuThread* pThread)
{
NuError err;
long origOffset;
NuStraw* pStraw = NULL;
NuDataSink* pDataSink = NULL;
uint32_t srcLen = 0, dstLen = 0;
uint16_t threadCrc;
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
Assert(pArchive != NULL);
Assert(pDataSource != NULL);
/* okay if pProgressData is NULL */
Assert(dstFp != NULL);
Assert(pThread != NULL);
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
/* remember file offset, so we can back up if compression fails */
err = Nu_FTell(dstFp, &origOffset);
BailError(err);
Assert(origOffset == pThread->fileOffset); /* can get rid of ftell? */
/* fill in some thread fields */
threadCrc = kNuInitialThreadCRC;
pThread->thThreadClass = NuThreadIDGetClass(threadID);
pThread->thThreadKind = NuThreadIDGetKind(threadID);
pThread->actualThreadEOF = (uint32_t)-1;
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
/* nuThreadIdx and fileOffset should already be set */
/*
* Get the input length. For "buffer" and "fp" sources, this is just
* a value passed in. For "file" sources, this is the length of the
* file on disk. The file should already have been opened successfully
* by the caller.
*
* If the input file is zero bytes long, "store" it uncompressed and
* bail immediately.
*
* (Our desire to store uncompressible data without compression clashes
* with a passing interest in doing CRLF conversions on input data. We
* want to know the length ahead of time, which potentially makes the
* compression code simpler, but prevents us from doing the conversion
* unless we pre-flight the conversion with a separate pass through the
* input file. Of course, it's still possible for the application to
* convert the file into a temp file and add from there, so all is
* not lost.)
*/
srcLen = Nu_DataSourceGetDataLen(pDataSource);
/*DBUG(("+++ input file length is %lu\n", srcLen));*/
/*
* Create a "Straw" to slurp the input through and track progress.
*/
err = Nu_StrawNew(pArchive, pDataSource, pProgressData, &pStraw);
BailError(err);
if (!srcLen) {
/* empty file! */
if (sourceFormat != kNuThreadFormatUncompressed) {
DBUG(("ODD: empty source is compressed?\n"));
}
pThread->thThreadFormat = kNuThreadFormatUncompressed;
pThread->thThreadCRC = threadCrc;
pThread->thThreadEOF = 0;
pThread->thCompThreadEOF = 0;
pThread->actualThreadEOF = 0;
goto done; /* send final progress message */
}
if (sourceFormat == kNuThreadFormatUncompressed) {
/*
* Compress the input to the requested target format.
*/
/* for some reason, GSHK doesn't compress anything under 512 bytes */
if (pArchive->valMimicSHK && srcLen < kNuSHKLZWThreshold)
targetFormat = kNuThreadFormatUncompressed;
if (pProgressData != NULL) {
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
if (targetFormat != kNuThreadFormatUncompressed)
Nu_StrawSetProgressState(pStraw, kNuProgressCompressing);
else
Nu_StrawSetProgressState(pStraw, kNuProgressStoring);
}
err = Nu_ProgressDataCompressPrep(pArchive, pStraw, targetFormat,
srcLen);
BailError(err);
switch (targetFormat) {
case kNuThreadFormatUncompressed:
err = Nu_CompressUncompressed(pArchive, pStraw, dstFp, srcLen,
&dstLen, &threadCrc);
break;
#ifdef ENABLE_SQ
case kNuThreadFormatHuffmanSQ:
err = Nu_CompressHuffmanSQ(pArchive, pStraw, dstFp, srcLen,
&dstLen, &threadCrc);
break;
#endif
#ifdef ENABLE_LZW
case kNuThreadFormatLZW1:
err = Nu_CompressLZW1(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
case kNuThreadFormatLZW2:
err = Nu_CompressLZW2(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
#endif
#ifdef ENABLE_LZC
case kNuThreadFormatLZC12:
err = Nu_CompressLZC12(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
case kNuThreadFormatLZC16:
err = Nu_CompressLZC16(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
#endif
#ifdef ENABLE_DEFLATE
case kNuThreadFormatDeflate:
err = Nu_CompressDeflate(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
#endif
#ifdef ENABLE_BZIP2
case kNuThreadFormatBzip2:
err = Nu_CompressBzip2(pArchive, pStraw, dstFp, srcLen, &dstLen,
&threadCrc);
break;
#endif
default:
/* should've been blocked in Value.c */
Assert(0);
err = kNuErrInternal;
goto bail;
}
BailError(err);
pThread->thThreadCRC = threadCrc; /* CRC of uncompressed data */
if (dstLen < srcLen ||
(dstLen == srcLen && targetFormat == kNuThreadFormatUncompressed))
{
/* got smaller, or we didn't try to compress it; keep it */
pThread->thThreadEOF = srcLen;
pThread->thCompThreadEOF = dstLen;
pThread->thThreadFormat = targetFormat;
} else {
/* got bigger, store it uncompressed */
err = Nu_FSeek(dstFp, origOffset, SEEK_SET);
BailError(err);
err = Nu_StrawRewind(pArchive, pStraw);
BailError(err);
if (pProgressData != NULL)
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
Nu_StrawSetProgressState(pStraw, kNuProgressStoring);
err = Nu_ProgressDataCompressPrep(pArchive, pStraw,
kNuThreadFormatUncompressed, srcLen);
BailError(err);
DBUG(("--- compression (%d) failed (%ld vs %ld), storing\n",
targetFormat, dstLen, srcLen));
err = Nu_CompressUncompressed(pArchive, pStraw, dstFp, srcLen,
&dstLen, &threadCrc);
BailError(err);
/*
* This holds so long as the previous attempt at compressing
* computed a CRC on the entire file (i.e. didn't stop early
* when it noticed the output was larger than the input). If
* this is always the case, then we can change "&threadCrc"
* a few lines back to "NULL" and avoid re-computing the CRC.
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
* If this is not always the case, remove this assert.
*/
Assert(threadCrc == pThread->thThreadCRC);
pThread->thThreadEOF = srcLen;
pThread->thCompThreadEOF = dstLen;
pThread->thThreadFormat = kNuThreadFormatUncompressed;
}
} else {
/*
* Copy the already-compressed input.
*/
if (pProgressData != NULL)
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
Nu_StrawSetProgressState(pStraw, kNuProgressCopying);
err = Nu_ProgressDataCompressPrep(pArchive, pStraw,
kNuThreadFormatUncompressed, srcLen);
BailError(err);
err = Nu_CompressUncompressed(pArchive, pStraw, dstFp, srcLen,
&dstLen, NULL);
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
BailError(err);
pThread->thThreadEOF = Nu_DataSourceGetOtherLen(pDataSource);
pThread->thCompThreadEOF = srcLen;
pThread->thThreadFormat = sourceFormat;
pThread->thThreadCRC = Nu_DataSourceGetRawCrc(pDataSource);
}
pThread->actualThreadEOF = pThread->thThreadEOF;
done:
DBUG(("+++ srcLen=%ld, dstLen=%ld, actual=%ld\n",
srcLen, dstLen, pThread->actualThreadEOF));
/* make sure we send a final "success" progress message at 100% */
if (pProgressData != NULL) {
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
(void) Nu_StrawSetProgressState(pStraw, kNuProgressDone);
err = Nu_StrawSendProgressUpdate(pArchive, pStraw);
BailError(err);
}
bail:
(void) Nu_StrawFree(pArchive, pStraw);
(void) Nu_DataSinkFree(pDataSink);
return err;
}
/*
* Copy pre-sized data into the archive at the current offset.
*
* All archive-specified fields in "pThread" will be filled in, as will
* "actualThreadEOF". The "nuThreadIdx" and "fileOffset" fields will
* not be modified.
*
* Pre-sized data is always uncompressed, and doesn't have a CRC. This
* will copy the data, and then continue writing zeros to fill out the rest
* of the pre-sized buffer.
*/
NuError Nu_CopyPresizedToArchive(NuArchive* pArchive, NuDataSource* pDataSource,
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
NuThreadID threadID, FILE* dstFp, NuThread* pThread, char** ppSavedCopy)
{
NuError err = kNuErrNone;
NuStraw* pStraw = NULL;
uint32_t srcLen, bufferLen;
uint32_t count, getsize;
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
srcLen = Nu_DataSourceGetDataLen(pDataSource);
bufferLen = Nu_DataSourceGetOtherLen(pDataSource);
if (bufferLen < srcLen) {
/* hey, this won't fit! */
DBUG(("--- can't fit %lu into buffer of %lu!\n", srcLen, bufferLen));
err = kNuErrPreSizeOverflow;
goto bail;
}
DBUG(("+++ copying %lu into buffer of %lu\n", srcLen, bufferLen));
pThread->thThreadClass = NuThreadIDGetClass(threadID);
pThread->thThreadFormat = kNuThreadFormatUncompressed;
pThread->thThreadKind = NuThreadIDGetKind(threadID);
pThread->thThreadCRC = 0; /* no CRC on pre-sized stuff */
pThread->thThreadEOF = srcLen;
pThread->thCompThreadEOF = bufferLen;
pThread->actualThreadEOF = srcLen;
/* nuThreadIdx and fileOffset should already be set */
/*
* Prepare to copy the data through a buffer. The "straw" thing
* is a convenient way to deal with the dataSource, even though we
* don't have a progress updater.
*/
err = Nu_StrawNew(pArchive, pDataSource, NULL, &pStraw);
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
BailError(err);
count = srcLen;
err = Nu_AllocCompressionBufferIFN(pArchive);
BailError(err);
while (count) {
getsize = (count > kNuGenCompBufSize) ? kNuGenCompBufSize : count;
err = Nu_StrawRead(pArchive, pStraw, pArchive->compBuf, getsize);
BailError(err);
err = Nu_FWrite(dstFp, pArchive->compBuf, getsize);
BailError(err);
if (ppSavedCopy != NULL && *ppSavedCopy == NULL) {
Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
/*
* Grab a copy of the filename for our own use. This assumes
* that the filename fits in kNuGenCompBufSize, which is a
* pretty safe thing to assume.
*/
Assert(threadID == kNuThreadIDFilename);
Assert(count == getsize);
*ppSavedCopy = Nu_Malloc(pArchive, getsize+1);
BailAlloc(*ppSavedCopy);
memcpy(*ppSavedCopy, pArchive->compBuf, getsize);
(*ppSavedCopy)[getsize] = '\0'; /* make sure it's terminated */
}
count -= getsize;
}
/*
* Pad out the rest of the buffer. Could probably do this more
* efficiently through the buffer we've allocated, but these regions
* tend to be either 32 or 200 bytes.
*/
count = bufferLen - srcLen;
while (count--)
Nu_WriteOne(pArchive, dstFp, 0);
bail:
(void) Nu_StrawFree(pArchive, pStraw);
/*Nu_Free(pArchive, buffer);*/
return err;
}