ciderpress/nufxlib/NOTES.txt
Andy McFadden 51b5f00f5c Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.

* Switch from MBCS to UNICODE APIs

Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out.  So it's
time to switch to wide strings.

This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode).  The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.

There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion.  These currently have fixed
place-holder "xyzzy" strings.

All UI strings are now wide.

Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow.  This doesn't play well with gcc, so
only the Windows-specific parts use those.

* Various updates to vcxproj files

The project-file conversion had some cruft that is now largely
gone.  The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.

* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots

The old "prebuilts" directory is now gone.  The libraries are now
built as part of building the apps.

I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).

* Replace symbols used for include guards

Symbols with a leading "__" are reserved.
2014-11-16 21:01:53 -08:00

207 lines
10 KiB
Plaintext

NufxLib NOTES
Last revised: 2000/01/23
The interface is documented in "nufxlibapi.html", available from the
www.nulib.com web site. This discusses some of the internal design that
may be of interest.
Some familiarity with the NuFX file format is assumed.
Read-Write Data Structures
==========================
For both read-only and read-write files (but not streaming read-only files),
the archive is represented internally as a linked list of Records, each
of which has an array of Threads attached. No attempt is made to
optimize searches by filename, so use of the "replace existing entry when
filenames match" option should be restricted to situations where it is
necessary. Otherwise, O(N^2) behavior can result.
Modifications, such as deletions, changes to filename threads, and
additions of new records, are queued up in a separate list until a NuFlush
call is issued. The list works much the same way as the temporary file:
when the operation completes, the "new" list becomes the "original" list.
If the operation is aborted, the "new" list is scrubbed, and the "original"
list remains unmodified.
Just as it is inefficient to write data to the temp file when it's not
necessary to do so, it is inefficient to allocate a complete copy of the
records from the original list if none are changed. As a result, there are
actually two "new" lists, one with a copy of the original record list, and
one with new additions. The "copy" list starts out uninitialized, and
remains that way until one of the entries from the original list is
modified. When that happens, the entire original list is duplicated, and
the changes are made directly to members of the "copy" list. (This is
important for really large archives, like a by-file archive with the
entire contents of a hard drive, where the record index could be several
megabytes in size.)
It would be more *memory* efficient to simply maintain a list of what
has changed. However, we can't disturb the "original" list in any way or
we lose the ability to roll back quickly if the operation is aborted.
Consequently, we need to create a new list of records that reflects
the state of the new archive, so that when we rename the temp file over
the original, we can simply "rename" the new record list over the original.
Since we're going to need the new list eventually, we might as well create
it as soon as it is needed, and deal with memory allocation failures up
front rather than during the update process. (Some items, such as the
record's file offset in the archive, have to be updated even for records
that aren't themselves changing... which means we potentially need to
modify all existing record structures, so we need a complete copy of the
record list regardless of how little or how much has changed.)
This also ties into the "modify original archive file directly if possible"
option, which avoids the need for creating and renaming a temp file. If
the only changes are updates to pre-sized records (e.g. renaming a file
inside the archive, or updating a comment), or adding new records onto the
end, there is little risk and possibly a huge efficiency gain in just
modifying the archive in place. If none of the operations caused the
"copy" list to be initialized, then clearly there's no need to write to a
temp file. (It's not actually this simple, because updates to pre-sized
threads are annotated in the "copy" list.)
One of the goals was to be able to execute a sequence of operations like:
- open original archive
- read original archive
- modify archive
- flush (success)
- modify archive
- flush (failure, rollback)
- modify archive
- flush (success)
- close archive
The archive is opened at the start and held open across many operations.
There is never a need to re-read the entire archive. We could avoid the
need to allocate two complete Record lists by requiring that the archive be
re-scanned after changes are aborted; if we did that, we could just modify
the original record list in place, and let the changes become "permanent"
after a successful write. In many ways, though, its cleaner to have two
lists.
Archives with several thousand entries should be sufficiently rare, and
virtual memory should be sufficiently plentiful, that this won't be a
problem for anyone. Scanning repeatedly through a 15MB archive stored on a
CD-ROM is likely to be very annoying though, so the design makes every
attempt to avoid repeated scans of the archive. And in any event, this
only applies to archive updates. The memory requirements for simple file
extraction are minimal.
In summary:
"orig" list has original set of records, and is not disturbed until
the changes are committed.
"copy" list is created on first add/update/delete operation, and
initially contains a complete copy of "orig".
"new" list contains all new additions to the archive, including
new additions that replace existing entries (the existing entry
is deleted from "copy" and then added to "new").
Each Record in the list has a "thread modification" list attached to it.
Any changes to the record header or additions to the thread mod list are
made in the "copy" set; the "original" set remains untouched. The thread
mod list can have the following items in it:
- delete thread (NuThreadIdx)
- add thread (type, otherSize, format, +contents)
- update pre-sized thread (NuThreadIdx, +contents)
Contents are specified with a NuDataSource, which allows the application
to indicate that the data is already compressed. This is useful for
copying parts of records between archives without having to expand and
recompress the data.
Some interactions and concepts that are important to understand:
When a file is added, the file type information will be placed in the
"new" Record immediately (subject to some restrictions: adding a data
fork always causes the type info to be updated, adding a rsrc fork only
updates the type info if a data fork is not already present).
Deleting a record results in the Record being removed from the "copy"
list immediately. Future modify operations on that NuRecordIdx will
fail. Future read operations will work just fine until the next
NuFlush is issued, because read operations use the "original" list.
Deleting all threads from a record results in the record being
deleted, but not until the NuFlush call is issued. It is possible to
delete all the existing threads and then add new ones.
It is *not* allowed to delete a modified thread, modify a deleted thread,
or delete a record that has been modified. This limitation was added to
keep the system simple. Note this does not mean you can't delete a data
fork and add a data fork; doing so results in operations on two threads
with different NuThreadIdx values. What you can't do is update the
filename thread and then delete it, or vice-versa. (If anyone can think
of a reason why you'd want to rename a file and then delete it with the
same NuFlush call, I'll figure out a way to support it.)
Updating a filename thread is intercepted, and causes the Record's
filename cache to be updated as well. Adding a filename thread for
records where the filename is stored in the record itself cause the
"in-record" filename to be zeroed. Adding a filename thread to a
record that already has one isn't allowed; nufxlib restricts you to
a single filename thread per record.
Some actions on an archive are allowed but strongly discouraged. For
example, deleting a filename thread but leaving the data threads behind
is a valid thing to do, but leaves most archivers in a state of mild
confusion. Deleting the data threads but leaving the filename thread is
similarly perplexing.
You can't call "update thread" on a thread that doesn't yet exist,
even if an "add thread" call has been made. You can, however, call
"add thread" on a newly created Record.
When a new record is created because of a "create record" call, a filename
thread is created automatically. It is not necessary to explicitly add the
filename.
Failures encountered while committing changes to a record cause all
operations on that record to be rolled back. If, during a NuFlush, a
file add fails, the user is given the option of aborting the entire
operation or skipping the file in question (and perhaps retrying or other
options as well). Aborting the flush causes a complete rollback. If only
the thread mod operation is canceled, then all thread mods for that record
are ignored. The temp file (or archive file) will have its file pointer
reset to the original start of the record, and if the record already
existed in the original archive, the full original record will be copied
over. This may seem drastic, but it helps ensure that you don't end up
with a record in a partially created state.
If a failure occurs during an "update in place", it isn't possible to
roll back all changes. If the failure was due to a bug in NufxLib, it
is possible that the archive could be unrecoverably damaged. NufxLib
tries to identify such situations, and will leave the archive open in
read-only mode after rolling back any new file additions.
Updating Filenames
==================
Updating filenames is a small nightmare, because the filename can be
either in the record header or in a filename thread. It's possible,
but illogical, to have a single record with a filename in the record
header and two or more filenames in threads.
NufxLib will not automatically "fix" broken records, but it will prevent
applications from creating situations that should not exist.
When reading an archive, NufxLib will use the filename from the
first filename thread found. If no filename threads are found, the
filename from the record header will be used.
If you add a filename thread to a record that has a filename in the
record header, the header name will be removed.
If you update a filename thread in a record that has a filename in
the record header, the header name will be left untouched.
Adding a filename thread is only allowed if no filename thread exists,
or all existing filename threads have been deleted.