mirror of
https://github.com/fadden/ciderpress.git
synced 2024-11-26 17:49:21 +00:00
51b5f00f5c
CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
125 lines
4.2 KiB
Plaintext
125 lines
4.2 KiB
Plaintext
NufxLib README, updated 2004/03/18
|
|
http://www.nulib.com/
|
|
|
|
See "COPYING-LIB" for distribution restrictions.
|
|
|
|
|
|
UNIX
|
|
====
|
|
|
|
Run the "configure" script. Read through "INSTALL" if you haven't used
|
|
one of these before, especially if you want to use a specific compiler
|
|
or a particular set of compiler flags.
|
|
|
|
You can disable specific compression methods with "--disable-METHOD"
|
|
(run "sh ./configure --help" to see the possible options). By default,
|
|
all methods are enabled except bzip2.
|
|
|
|
Run "make depend" if you have makedepend, and then type "make". This will
|
|
build the library and all of the programs in the "samples" directory.
|
|
There are some useful programs in "samples", described in a README.txt
|
|
file there. In particular, you should run samples/test-basic to verify
|
|
that things are more or less working.
|
|
|
|
If you want to install the library and header file into standard system
|
|
locations (usually /usr/local), run "make install". To learn how to
|
|
specify different locations, read the INSTALL document.
|
|
|
|
There are some flags in "OPT" you may want to use. The "autoconf" default
|
|
for @CFLAGS@ is "-g -O2".
|
|
|
|
-DNDEBUG
|
|
Disable assert() calls and extra tests. This will speed things up,
|
|
but errors won't get caught until later on, making the root cause
|
|
harder to locate.
|
|
|
|
-DDEBUG_MSGS
|
|
Enable debug messages. This increases the size of the executable,
|
|
but shouldn't affect performance. When errors occur, more output is
|
|
produced. The "debug dump" feature is enabled by this flag.
|
|
|
|
-DDEBUG_VERBOSE
|
|
(Implicitly sets DEBUG_MSGS.) Spray lots of debugging output.
|
|
|
|
If you want to do benchmarks, use "-O2 -DNDEBUG". The recommended
|
|
configuration during testing is "-g -O2 -DDEBUG_MSGS", so that verbose
|
|
debug output is available when errors occur.
|
|
|
|
The flags are stuffed into Version.c, so the application program can
|
|
examine and display the flags that were used to build the library.
|
|
|
|
|
|
BeOS
|
|
====
|
|
|
|
This works just like the UNIX version, but certain defaults have been
|
|
changed. Running configure without arguments under BeOS is equivalent to:
|
|
|
|
./configure --prefix=/boot --includedir='${prefix}/develop/headers'
|
|
--libdir='${exec_prefix}/home/config/lib' --mandir='/tmp'
|
|
--bindir='${exec_prefix}/home/config/bin'
|
|
|
|
If you're using BeOS/PPC, it will also do:
|
|
|
|
CC=cc CFLAGS='-proc 603 -opt full'
|
|
|
|
|
|
Mac OS X
|
|
========
|
|
|
|
This works just like the UNIX version, with the exception that when you link
|
|
against nufxlib, your project must also link against the Carbon framework.
|
|
This can be done in ProjectBuilder by using the Add Framework option in the
|
|
Project menu, or by adding "-framework Carbon" to the gcc command line.
|
|
|
|
You'll see some warnings due to some namespace collisions between nufxlib and
|
|
Carbon, but everything will work fine. Carbon is used to provide support for
|
|
file types and resource forks.
|
|
|
|
|
|
Win32
|
|
=====
|
|
|
|
If you're using an environment that supports "configure" scripts, such as
|
|
DJGPP, follow the UNIX instructions.
|
|
|
|
NufxLib has been tested with Microsoft Visual C++ 6.0. To build NufxLib,
|
|
start up a DOS shell and run vcvars32.bat to set your environment. Run:
|
|
nmake -f makefile.msc
|
|
to build with debugging info, or
|
|
nmake -f makefile.msc nodebug=1
|
|
to build optimized.
|
|
|
|
See the makefile for comments about including zlib or libbz2. These
|
|
need to be enabled at compile time and linked into the sample apps.
|
|
|
|
Once the library has been built, "cd samples" and run the same command there.
|
|
When it finishes, run "test-basic.exe".
|
|
|
|
If you want to build NufxLib as a DLL, use "makefile.dll" instead.
|
|
If you're using zlib or libbz2, these will need to be linked into the DLL.
|
|
The makefile currently assumes that you will want to use zlib.dll.
|
|
|
|
|
|
Other Notes
|
|
===========
|
|
|
|
All of the source code is now formatted with spaces instead of tabs.
|
|
|
|
If you want to use the library in a multithreaded application, you should
|
|
define "USE_REENTRANT_CALLS" to tell it to use reentrant versions of
|
|
certain library calls. This defines _REENTRANT, which causes Solaris to
|
|
add the appropriate goodies. (Seems to me you'd always want this on, but
|
|
for some reason Solaris makes you take an extra step, so I'm not going to
|
|
define it by default.)
|
|
|
|
|
|
Legalese
|
|
========
|
|
|
|
NufxLib, a NuFX archive manipulation library.
|
|
Copyright (C) 2000-2007 by Andy McFadden, All Rights Reserved.
|
|
|
|
See COPYING for license.
|
|
|