gno/sys/sim/sim.asm
gdr-ftp 135cfc6169 sim.asm:
- did a 'setcom 60' to catch the weird formatting
	- created a dummy routine to go in the .root file.
	- this file didn't originally compile due to unresolved
	  references to ExtVect2.  Looking at the source it appears that
	  someone had started to modify it to allow a second interrupt
	  vector, but handn't finished the job.  I commented out the
	  initialization and checking of ExtVect2.
simlib.asm:
	- did a 'setcom 60' to catch the weird formatting
	- created a dummy routine to go in the .root file.
Makefile:
	- complete overhaul to fit into the GNO base builds
1999-02-08 05:53:38 +00:00

717 lines
13 KiB
NASM

* Serial Interrupt Manager Permanent INIT file
setcom 60
case on
mcopy sim.mac
dummysim2 start ; ends up in .root
end
************************************************************************
* Global Firmware Equates
v_Main gequ $E10010
v_AppleTalk gequ $E10020
v_Serial gequ $E10024
* Address of SerFlag is same for all three ROM revisions of the IIGS
SerFlag gequ $E10104
* This value determines whether SIM is installed as a user tool or
* as a system tool.
sysFlag gequ 0 make '$8000' to install as user tool
* This value determines not only which tool set number SIM should be
* installed as, but also the error codes that are returned
toolNum gequ $4000 change to $0400 for user tool
* Current version of SIM in tool version format
Version gequ $0100
copy simequates.equ
* Request proc dataOut map
Gcount gequ 0
Gerror gequ 2
Gversion gequ 4
* Input buffer data structure for Install and Remove calls
SIMport gequ 0
SIMaddress gequ 2
************************************************************************
* Install our RequestProc, and install the new interrupt handlers, etc.
SIMINIT START
using SIMData
phb
phk
plb
lda #0
sta IntVectPrinter indicate that no vectors are
sta IntVectPrinter+2 installed
sta IntVectModem
sta IntVectModem+2
sta ExtVect1
sta ExtVect1+2
* gdr: commented out because it seems that the ExtVect2 code was never
* finished.
* sta ExtVect2
* sta ExtVect2+2
sta ourSerFlag no SCC interrupts are handled
* Turn off interrupts while we do the dirty deed
php
sei
* set the IIGS main interrupt vector to point to our version of this
* routine. This code only works on a ROM 01 at this point due to the
* different code locations.
* We check the ROM version here and install the appropriate routine
jsr GetROMVersion
cmp #0
beq doRom0
cmp #1
beq doRom0
lda jmpit3
sta >v_Main
lda jmpit3+2
sta >v_Main+2
bra donePatch
doRom0 lda jmpit1
sta >v_Main
lda jmpit1+2
sta >v_Main+2
donePatch plp
ph4 #SIMName
pha
_MMStartUp
pla
sta SIMuserID
pha
ph4 #SIMRequest
_AcceptRequests
jsl CheckPort
plb
rtl
jmpit1 jmp >ROM01IntVect
jmpit3 jmp >ROM03IntVect
END
ROM03IntVect START
using SIMData
clc (E1/0010 JMPs here, FF/BC6C)
xce
long mx
php
phb
; Assume B=00E1
pea $E1E1
plb
sta |$0108 ; ASave
lda |$C035 ; shadow register
sta |$0119 ; ShadSave
ora #$8000
and #$9F3E
sta |$C035 ; shadow register
stx |$010A ; XSave
sty |$010C ; YSave
tdc
sta |$0110 ; DPSave
lda #$0000
tcd
short mx
bcc NotSure ; check emulation mode
lda $04,s ; and check for brk
and #$10
adc #$70
NotSure bvc hmm3
* $$$ ROM DEPENDENT ENTRY POINT $$$
jmp >$FFBD16
hmm3 lda #$03
sta |$C039 SCCAREG
lda |$C039 SCCAREG
bit |$0103 ATlkFlag
beq SerInt2
pha
and #$07
bne ChanB
lda |$C03B SCCADATA
sta |$0105 SerIntData
lda |$C03B SCCADATA
sta |$0106 SerIntData+1
jsl >v_AppleTalk
bra Next
ChanB lda $C03A SCCBDATA
sta |$0105 SerIntData
lda $C03A SCCBDATA
sta |$0106 SerIntData+1
jsl >v_AppleTalk IRQ_ATalk
Next lda >$010101
sta |$011C
lda #$00
ror a
sta |$E10101
pla
bra Next2 not appletalk?
SerInt2 pha
lda >$010101
sta |$011C
stz |$E10101
jsl >$E1021C MIDI?
pla
bcc handledIt was a midi interrupt, exit intr
clc
Next2 anop
pha
and >ourSerFlag
beq notOurSerIntr
lda 1,s
bit #%00000111
beq doPortPrinter
jsl >IntVectModem
rol $0101
doPortPrinter anop
lda 1,s
and >ourSerFlag
beq notOurSerIntr1
bit #%00111000
beq notOurSerIntr1
jsl >IntVectPrinter
rol $0101
notOurSerIntr1 pla
lda $0101
beq handledIt
* $$$ ROM DEPENDENT ENTRY POINT $$$
* was a SCC interrupt, but we didn't install it!
jmp >$FFBD15
notOurSerIntr anop
* $$$ ROM DEPENDENT ENTRY POINT
* check for 'external' interrupts here
jsr checkExternal
bcs handledIt1
lda 1,s
jmp >$FFBCFA ; Back to the real intr handler
handledIt1 pla
handledIt long mx
plb
* $$$ ROM DEPENDENT ENTRY POINT $$$
jmp >$FFBF58 ; Exit
END
ROM01IntVect START
using SIMData
clc
xce
long mx
php
phb
pea $E1E1
plb
sta $0108
lda $C035
sta $0119
ora #$8000
and #$9F1E
sta $C035
stx $010A
sty $010C
tdc
sta $0110
lda #0
tcd
short mx
bcc sw2 emulation mode?
lda 4,s yes check to see if this intr is a BRK
and #$10
adc #$70
sw2 bvc switch1
* $$$ ROM DEPENDENT ENTRY POINT
jmp >$FFB85F it was a BRK, let the firmware handle it
switch1 lda #3
sta $C039
lda $C039
bit $0103
beq X_B83F
pha
and #$07
bne X_B826
lda $C03B
sta $0105
lda $C03B
sta $0106
jsl >v_AppleTalk
bra X_B836
X_B826 lda $C03A
sta $0105
lda $C03A
sta $0106
jsl >v_AppleTalk
X_B836 lda #0
ror a
sta $0101
pla
bra X_B842
X_B83F stz $0101
X_B842 pha
and >ourSerFlag
beq notOurSerIntr
lda 1,s
bit #%00000111
beq doPortPrinter
jsl >IntVectModem
rol $0101
doPortPrinter anop
lda 1,s
and >ourSerFlag
beq notOurSerIntr1
bit #%00111000
beq notOurSerIntr1
jsl >IntVectPrinter
rol $0101
notOurSerIntr1 pla
lda $0101
beq handledIt
* $$$ ROM DEPENDENT ENTRY POINT
jmp >$FFB85E
handledIt1 pla
handledIt long mx
plb
* $$$ ROM DEPENDENT ENTRY POINT
jmp >$FFBA86
notOurSerIntr anop
* $$$ ROM DEPENDENT ENTRY POINT
* check 'external' interrupt sources here
jsr checkExternal
bcs handledIt1
lda 1,s
jmp >$FFB843 ; Back to the real intr handler
END
SIMRequest START
using SIMData
misc equ 3
result equ 14+misc
reqCode equ 12+misc
dataIn equ 8+misc
dataOut equ 4+misc
rtl equ 1+misc
phb
phk
plb
phd
tsc
tcd
lda reqCode
cmp #$8003
jcs exitRequestErr
cmp #$8000
jcc exitRequestErr
and #$00FF
asl a
tax
jmp (requestProcs,X)
requestProcs dc a2'doInstall'
dc a2'doRemove'
dc a2'doVersion'
doInstall anop
ldy #SIMport
lda [dataIn],y
jsr ValidatePort
bcs notValidPort
cmp |ApTalkPort is appletalk running on this port?
beq ohNoItsATalk
cmp #3 ; external port?
bcs installExt
dec a
asl a
asl a
tax
lda IntVectPrinter,x
ora IntVectPrinter+2,x
bne intInstalled
* Turn off interrupts, so we don't get caught with our pants down
php
sei
* install the new vector in our interrupt handler table
lda #$5C
sta IntVectPrinter,x
ldy #SIMaddress
lda [dataIn],y
sta IntVectPrinter+1,x
ldy #SIMaddress+1
lda [dataIn],y
sta IntVectPrinter+2,x
* Now set OurSerFlag to indicate that we now have a handler on that
* port
ldx #%00000111
ldy #SIMport
lda [dataIn],y
cmp #2
beq port2
ldx #%00111000
port2 txa
ora ourSerFlag
sta ourSerFlag
* And reset the firmware's SerFlag to indicate we're in control
ldx #%11111000
ldy #SIMport
lda [dataIn],y
cmp #SIMModemPort
beq port2a
ldx #%11000111
port2a txa
and >SerFlag
sta >SerFlag
* Restore interrupts
plp
okayno1 lda #SIMNoError
bra goodbye
ohNoItsATalk lda #SIMATalkActive
bra goodbye
notValidPort lda #SIMInvalidPort
bra goodbye
intInstalled lda #SIMAlreadyInst a handler is already installed
goodbye anop
ldy #Gerror
sta [dataOut],y
jmp exitRequest
installExt dec a
dec a
dec a
asl a
asl a
tax
lda ExtVect1,x
cmp ExtVect1+2,x
bne intInstalled
php
sei
lda #$5C
sta ExtVect1,x
ldy #SIMaddress
lda [dataIn],y
sta ExtVect1+1,x
ldy #SIMaddress+1
lda [dataIn],y
sta ExtVect1+2,x
plp
bra okayno1
doRemove anop
* Calculate index into our handler list by quadrupling "port"
ldy #SIMport
lda [dataIn],y
jsr ValidatePort
bcs notValidPort
cmp #3
jcs removeExternal
dec a
asl a
asl a
tax
* If there is no handler installed on that port, return an error
lda IntVectPrinter,x
ora IntVectPrinter+2,x
beq noIntInstalled
* If the handler on the port isn't the one the application claims,
* return an error
lda IntVectPrinter+1,x
ldy #SIMaddress
cmp [dataIn],y
bne notSameVect
lda IntVectPrinter+2,x
ldy #SIMaddress+1
cmp [dataIn],y
bne notSameVect
* otherwise, we're cool, so zero out the handler vector
php
sei
lda #0
sta IntVectPrinter,x
sta IntVectPrinter+2,x
* and modify serFlag to say "no handlers here, bub!"
ldx #%11111000
ldy #SIMport
lda [dataIn],y
cmp #SIMModemPort
beq port3
ldx #%11000111
port3 txa
and ourSerFlag
sta ourSerFlag
* We don't re-enable the firmware's SerFlag because there is nobody
* installed now!
plp
noerrgoaway lda #0
bra goodbye2
notSameVect lda #SIMInvalidAddr
jmp goodbye
noIntInstalled lda #SIMNotInstalled
goodbye2 ldy #Gerror
sta [dataOut],y
jmp exitRequest
removeExternal anop
dec a
dec a
dec a
asl a
asl a
tax
* if no handler is installed, signal an error
lda ExtVect1,x
ora ExtVect1+2,x
beq noIntInstalled
* if handler is not the same as is there, signal an error
lda ExtVect1+1,x
ldy #SIMaddress
cmp [dataIn],y
bne notSameVect
lda ExtVect1+2,x
ldy #SIMaddress+1
cmp [dataIn],y
bne notSameVect
php
sei
lda #0
sta ExtVect1,X
sta ExtVect1+2,X
plp
bra noerrgoaway
doVersion anop
lda #Version
ldy #Gversion
sta [dataOut],y
lda #SIMNoError
ldy #Gerror
sta [dataOut],y
bra exitRequest
exitRequestErr anop
lda #0
sta result
bra exitRequest1
exitRequest lda #$8000
sta result
exitRequest1 anop
pld
plb
lda 2,s
sta 12,s
lda 1,s
sta 11,s
ply
ply
ply
ply
ply
rtl
END
* Does not modify the port number in A
ValidatePort START
cmp #1
bcc bad
cmp #7
bcs bad
clc
rts
bad sec
rts
END
GetROMVersion START
pha
pha
pha
pha
lda #0
pha
pha
pha
pea $FE1F
_FWEntry
ply
pla
pla
pla
tya
rts
END
;
; This routine checks to see which serial port, if any, AppleTalk is using.
; The routine sets a flag byte, ApTalkPort, and the accumulator to indicate
; which port (if any) AppleTalk is using.
; $0000 = AppleTalk is not using a serial port
; $0001 = AppleTalk is using serial port 1 (printer port)
; $0002 = AppleTalk is using serial port 2 (modem port)
; Note: This method should be used under GS/OS only.
;
; Enter routine in native 16 bit mode
;
longa on
longi on
CheckPort START
GetPort equ $8001 The .AppleTalk DStatus subcall to get
; the port number AppleTalk is currently
; using.
phb save data bank
phk data bank = code bank
plb
lda #$0001 start with device #1
sta DIdevNum
FindATDriver anop
_DInfoGS DInfoParms call Dinfo
bcs DIError stop searching if error
lda DIdeviceIDNum
cmp #$001D is it the AppleTalk main driver?
beq ATDriverFound yes
inc DIdevNum check the
bra FindATDriver next device number
ATDriverFound anop
lda DIdevNum store device number
sta DSdevNum in the DStatus parm list
_DStatusGS DStatusParms call DStatus
lda portNum get the port number
sta ApTalkPort
bra Exit
DIError anop
cmp #$0011 invalid device number, so the
beq NotFound AppleTalk main driver wasn't found
;
; Add your code to handle any other errors from DInfo here, because the
; end of the device list was not found.
NotFound stz ApTalkPort neither port is in use
bra Exit
Exit anop
lda ApTalkPort
plb restore data bank
rtl return to caller
ApTalkPort entry
ds 2 will be 0, 1, or 2
DInfoParms anop
dc i2'8' pCount = 8 parameters
DIdevNum dc i2'1' devNum
dc a4'NameBuffer' devName
ds 2 characteristics
ds 4 totalBlocks
ds 2 slotNum
ds 2 unitNum
ds 2 version
DIdeviceIDNum ds 2 deviceIDNum
NameBuffer anop
dc i2'31' Class 1 input string. Max Length=31
ds 33
DStatusParms anop
dc i2'5' pCount = 5 parameters
DSdevNum ds 2 devNum
dc i2'GetPort' statusCode = GetPort
dc a4'GetPortSList' statusList = GetPortSList
dc i4'2' requestCount = 2
ds 4 transferCount
GetPortSList anop the GetPort subcall's statusList
portNum ds 2 Port appletalk is using
dc i2'0'
END
SIMData DATA
SIMName str 'SerialIntrMgr~Entry~'
userID dc i2'0'
ourSerFlag dc i2'0'
SIMuserID dc i2'0'
IntVectPrinter ENTRY
dc i4'0'
IntVectModem dc i4'0'
ExtVect1 ENTRY
dc i4'0'
dc i4'0'
dc i4'0'
dc i4'0'
END
checkExternal START
* check first external vector
lda >ExtVect1
ora >ExtVect1+2
* beq checksecond ; originally beq checksecond
beq neither ; rather than beq neither,
jsl ExtVect1 ; but the ExtVect2 code seems
bcs gotit ; not to have been finished
*checksecond lda >ExtVect2
* ora >ExtVect2+2
* beq neither
* jsl ExtVect2
gotit rts
neither clc
rts
END