hush/scripts/kconfig/Makefile

272 lines
8.4 KiB
Makefile
Raw Normal View History

2006-10-05 10:17:08 +00:00
# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile
PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
xconfig: $(obj)/qconf
$< Config.in
gconfig: $(obj)/gconf
$< Config.in
menuconfig: $(obj)/mconf
$(Q)$(MAKE) $(build)=scripts/kconfig/lxdialog
$< Config.in
config: $(obj)/conf
$< Config.in
# Mtime granularity problem.
# It was observed that these commands:
# make allnoconfig; sed -i -e '/CONFIG_TRUE/s/.*/CONFIG_TRUE=y/' .config; make
# sometimes produce busybox with "true" applet still disabled.
# This is caused by .config updated by sed having mtime which is still
# equal to (not bigger than) include/autoconf.h's mtime,
# and thus 2nd make does not regenerate include/autoconf.h.
# Waiting for 1 second after non-interactive "make XXXXconfig"
# prevents this from happening.
#
# We'd like to detect whether filesystem we are on has coarse mtimes,
# but can't do it yet, bbox ls hasn't got --full-time.
#MTIME_IS_COARSE:=@ls --full-time -ld | grep -F .000 >/dev/null
MTIME_IS_COARSE:=@true
2006-10-05 10:17:08 +00:00
oldconfig: $(obj)/conf
$< -o Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
silentoldconfig: $(obj)/conf
$< -s Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
update-po-config: $(obj)/kxgettext
xgettext --default-domain=linux \
--add-comments --keyword=_ --keyword=N_ \
--files-from=scripts/kconfig/POTFILES.in \
--output scripts/kconfig/config.pot
$(Q)ln -fs Kconfig_i386 arch/um/Kconfig_arch
$(Q)for i in `ls arch/`; \
do \
scripts/kconfig/kxgettext arch/$$i/Kconfig \
| msguniq -o scripts/kconfig/linux_$${i}.pot; \
done
$(Q)msgcat scripts/kconfig/config.pot \
`find scripts/kconfig/ -type f -name linux_*.pot` \
--output scripts/kconfig/linux_raw.pot
$(Q)msguniq --sort-by-file scripts/kconfig/linux_raw.pot \
--output scripts/kconfig/linux.pot
$(Q)rm -f arch/um/Kconfig_arch
$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
randconfig: $(obj)/conf
$< -r Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
allyesconfig: $(obj)/conf
$< -y Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
allnoconfig: $(obj)/conf
$< -n Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
allmodconfig: $(obj)/conf
$< -m Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
$< -d Config.in
else
@echo *** Default configuration is based on '$(KBUILD_DEFCONFIG)'
$(Q)$< -D $(KBUILD_DEFCONFIG) Config.in
endif
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
%_defconfig: $(obj)/conf
$(Q)$< -D $@ Config.in
$(MTIME_IS_COARSE) && sleep 1
2006-10-05 10:17:08 +00:00
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
@echo ' menuconfig - Update current config utilising a menu based program'
@echo ' xconfig - Update current config utilising a QT based front-end'
@echo ' gconfig - Update current config utilising a GTK based front-end'
@echo ' oldconfig - Update current config utilising a provided .config as base'
@echo ' randconfig - New config with random answer to all options'
@echo ' defconfig - New config with default answer to all options'
@echo ' allmodconfig - New config selecting modules when possible'
@echo ' allyesconfig - New config where all options are accepted with yes'
@echo ' allnoconfig - New config where all options are answered with no'
# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf: Used for defconfig, oldconfig and related targets
# mconf: Used for the mconfig target.
# Utilizes the lxdialog package
# qconf: Used for the xconfig target
# Based on QT which needs to be installed to compile it
# gconf: Used for the gconfig target
# Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours
hostprogs-y := conf mconf qconf gconf kxgettext
conf-objs := conf.o zconf.tab.o
mconf-objs := mconf.o zconf.tab.o
kxgettext-objs := kxgettext.o zconf.tab.o
ifeq ($(MAKECMDGOALS),xconfig)
qconf-target := 1
endif
ifeq ($(MAKECMDGOALS),gconfig)
gconf-target := 1
endif
ifeq ($(qconf-target),1)
qconf-cxxobjs := qconf.o
qconf-objs := kconfig_load.o zconf.tab.o
endif
ifeq ($(gconf-target),1)
gconf-objs := gconf.o kconfig_load.o zconf.tab.o
endif
clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
.tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
subdir- += lxdialog
# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
2006-10-05 10:17:08 +00:00
# generated files seem to need this to find local include files
HOSTCFLAGS_lex.zconf.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-D LKC_DIRECT_LINK
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
ifeq ($(qconf-target),1)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
@set -e; echo " CHECK qt"; dir=""; pkg=""; \
pkg-config --exists qt 2> /dev/null && pkg=qt; \
pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
if [ -n "$$pkg" ]; then \
cflags="\$$(shell pkg-config $$pkg --cflags)"; \
libs="\$$(shell pkg-config $$pkg --libs)"; \
moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
dir="$$(pkg-config $$pkg --variable=prefix)"; \
else \
for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
done; \
if [ -z "$$dir" ]; then \
echo "*"; \
echo "* Unable to find the QT installation. Please make sure that"; \
echo "* the QT development package is correctly installed and"; \
echo "* either install pkg-config or set the QTDIR environment"; \
echo "* variable to the correct location."; \
echo "*"; \
false; \
fi; \
libpath=$$dir/lib; lib=qt; osdir=""; \
$(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
test -f $$libpath/libqt-mt.so && lib=qt-mt; \
cflags="-I$$dir/include"; \
libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
moc="$$dir/bin/moc"; \
fi; \
if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
echo "*"; \
echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
echo "*"; \
moc="/usr/bin/moc"; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
echo "KC_QT_MOC=$$moc" >> $@
endif
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
ifeq ($(gconf-target),1)
-include $(obj)/.tmp_gtkcheck
# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
touch $@; \
else \
echo "*"; \
echo "* GTK+ is present but version >= 2.0.0 is required."; \
echo "*"; \
false; \
fi \
else \
echo "*"; \
echo "* Unable to find the GTK+ installation. Please make sure that"; \
echo "* the GTK+ 2.0 development package is correctly installed..."; \
echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
echo "*"; \
false; \
fi
endif
$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
$(obj)/gconf.o: $(obj)/lkc_defs.h
$(obj)/%.moc: $(src)/%.h
$(KC_QT_MOC) -i $< -o $@
$(obj)/lkc_defs.h: $(src)/lkc_proto.h
sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
###
# The following requires flex/bison/gperf
# By default we use the _shipped versions, uncomment the following line if
# you are modifying the flex/bison src.
# LKC_GENPARSER := 1
ifdef LKC_GENPARSER
$(obj)/zconf.tab.c: $(src)/zconf.y
$(obj)/lex.zconf.c: $(src)/zconf.l
$(obj)/zconf.hash.c: $(src)/zconf.gperf
%.tab.c: %.y
bison -l -b $* -p $(notdir $*) $<
cp $@ $@_shipped
lex.%.c: %.l
flex -L -P$(notdir $*) -o$@ $<
cp $@ $@_shipped
%.hash.c: %.gperf
gperf < $< > $@
cp $@ $@_shipped
endif