hush/examples/mdev_fat.conf

145 lines
5.5 KiB
Plaintext
Raw Normal View History

#
# This is a sample mdev.conf
#
# Provide user, group, and mode information for devices. If a regex matches
# the device name provided by sysfs, use the appropriate user:group and mode
# instead of the default 0:0 660.
#
# Syntax:
mdev: improve $SEQ handling; improve debug logging Sequential run of concurrent mdev's was too simplistic: they waited for /dev/mdev.seq to match. This could sometimes cause cumulative loss of time on the order of a second. Added SIGCHLD signaling from exiting mdev to all other mdev's. Added debugging required to see that code actually works as intended. Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2): mdev[1023]: first seq written ^^^^ seq, not pid mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211 mdev[1023]: rule matched, line -1 ^^^^^^^ means "default rule" mdev[1023]: 35.022676 exiting ^^^^^^^^^ second,usec timestamp mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9 mdev[1024]: dev 7,9 mdev[1025]: 35.069889 waiting for '1024' mdev[1026]: 35.069946 waiting for '1024' mdev[1027]: 35.070151 waiting for '1024' mdev[1024]: rule matched, line -1 mdev[1024]: mknod vcs9 (7,9) 20660 0:0 mdev[1024]: 35.070346 exiting mdev[1025]: woken up mdev[1026]: woken up mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9 ^^^^^^^^^ took only a millisecond to start running after prev mdev exited mdev[1025]: dev 7,137 mdev[1027]: woken up mdev[1025]: rule matched, line -1 mdev[1025]: mknod vcsa9 (7,137) 20660 0:0 mdev[1025]: 35.072109 exiting function old new delta mdev_main 849 1372 +523 curtime - 59 +59 dirAction 87 134 +47 static.ts - 8 +8 keywords 19 12 -7 make_device 2189 2119 -70 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-27 09:51:41 +00:00
# [-][ENVVAR=regex;]...devicename_regex user:group mode [=path]|[>path]|[!] [@|$|*cmd args...]
# [-][ENVVAR=regex;]...@maj,min[-min2] user:group mode [=path]|[>path]|[!] [@|$|*cmd args...]
# [-]$ENVVAR=regex user:group mode [=path]|[>path]|[!] [@|$|*cmd args...]
#
# [-]: do not stop on this match, continue reading mdev.conf
# =: move, >: move and create a symlink
# !: do not create device node
# @|$|*: run cmd if $ACTION=remove, @cmd if $ACTION=add, *cmd in all cases
# support module loading on hotplug
$MODALIAS=.* root:root 660 @modprobe "$MODALIAS"
# null may already exist; therefore ownership has to be changed with command
null root:root 666 @chmod 666 $MDEV
zero root:root 666
full root:root 666
random root:root 444
urandom root:root 444
hwrandom root:root 444
grsec root:root 660
kmem root:root 640
mem root:root 640
port root:root 640
# console may already exist; therefore ownership has to be changed with command
console root:tty 600 @chmod 600 $MDEV
ptmx root:tty 666
pty.* root:tty 660
# Typical devices
tty root:tty 666
tty[0-9]* root:tty 660
vcsa*[0-9]* root:tty 660
ttyS[0-9]* root:uucp 660
# block devices
ram([0-9]*) root:disk 660 >rd/%1
loop([0-9]+) root:disk 660 >loop/%1
sd[a-z].* root:disk 660 */lib/mdev/usbdisk_link
hd[a-z][0-9]* root:disk 660 */lib/mdev/ide_links
md[0-9]* root:disk 660
sr[0-9]* root:cdrom 660 @ln -sf $MDEV cdrom
fd[0-9]* root:floppy 660
# net devices
mdev: improve $SEQ handling; improve debug logging Sequential run of concurrent mdev's was too simplistic: they waited for /dev/mdev.seq to match. This could sometimes cause cumulative loss of time on the order of a second. Added SIGCHLD signaling from exiting mdev to all other mdev's. Added debugging required to see that code actually works as intended. Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2): mdev[1023]: first seq written ^^^^ seq, not pid mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211 mdev[1023]: rule matched, line -1 ^^^^^^^ means "default rule" mdev[1023]: 35.022676 exiting ^^^^^^^^^ second,usec timestamp mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9 mdev[1024]: dev 7,9 mdev[1025]: 35.069889 waiting for '1024' mdev[1026]: 35.069946 waiting for '1024' mdev[1027]: 35.070151 waiting for '1024' mdev[1024]: rule matched, line -1 mdev[1024]: mknod vcs9 (7,9) 20660 0:0 mdev[1024]: 35.070346 exiting mdev[1025]: woken up mdev[1026]: woken up mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9 ^^^^^^^^^ took only a millisecond to start running after prev mdev exited mdev[1025]: dev 7,137 mdev[1027]: woken up mdev[1025]: rule matched, line -1 mdev[1025]: mknod vcsa9 (7,137) 20660 0:0 mdev[1025]: 35.072109 exiting function old new delta mdev_main 849 1372 +523 curtime - 59 +59 dirAction 87 134 +47 static.ts - 8 +8 keywords 19 12 -7 make_device 2189 2119 -70 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-27 09:51:41 +00:00
SUBSYSTEM=net;.* root:root 600 @nameif
tun[0-9]* root:root 600 =net/
tap[0-9]* root:root 600 =net/
# alsa sound devices and audio stuff
pcm.* root:audio 660 =snd/
control.* root:audio 660 =snd/
midi.* root:audio 660 =snd/
seq root:audio 660 =snd/
timer root:audio 660 =snd/
adsp root:audio 660 >sound/
audio root:audio 660 >sound/
dsp root:audio 660 >sound/
mixer root:audio 660 >sound/
sequencer.* root:audio 660 >sound/
# Less typical devices
# raid controllers
cciss!(.*) root:disk 660 =cciss/%1
ida!(.*) root:disk 660 =ida/%1
rd!(.*) root:disk 660 =rd/%1
ttyLTM[0-9] root:dialout 660 @ln -sf $MDEV modem
ttySHSF[0-9] root:dialout 660 @ln -sf $MDEV modem
slamr root:dialout 660 @ln -sf $MDEV slamr0
slusb root:dialout 660 @ln -sf $MDEV slusb0
fuse root:root 666
# dri device
card[0-9] root:video 660 =dri/
# misc stuff
agpgart root:root 660 >misc/
psaux root:root 660 >misc/
rtc root:root 664 >misc/
# input stuff
event[0-9]+ root:root 640 =input/
mice root:root 640 =input/
mouse[0-9] root:root 640 =input/
ts[0-9] root:root 600 =input/
# v4l stuff
vbi[0-9] root:video 660 >v4l/
video[0-9] root:video 660 >v4l/
# dvb stuff
dvb.* root:video 660 */lib/mdev/dvbdev
# load drivers for usb devices
usbdev[0-9].[0-9] root:root 660 */lib/mdev/usbdev
usbdev[0-9].[0-9]_.* root:root 660
# zaptel devices
zap(.*) root:dialout 660 =zap/%1
dahdi!(.*) root:dialout 660 =dahdi/%1
# HTC Android
# Attaching it via USB cable causes a flurry of activity:
#
# mdev[1271]: 48.639459 ACTION:add SUBSYSTEM:usb DEVNAME:bus/usb/001/009 DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5
# mdev[1271]: mknod bus/usb/001/009 (189,8) 20660 0:0
# mdev[1272]: 48.642354 ACTION:add SUBSYSTEM:usb DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0
# mdev[1272]: running: modprobe "$MODALIAS"
# mdev[1273]: 48.650078 ACTION:add SUBSYSTEM:scsi DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11
# mdev[1274]: 48.651297 ACTION:add SUBSYSTEM:scsi_host DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/scsi_host/host11
# mdev[1275]: 49.649422 ACTION:add SUBSYSTEM:scsi DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/target11:0:0
# mdev[1276]: 49.650703 ACTION:add SUBSYSTEM:scsi DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/target11:0:0/11:0:0:0
# mdev[1276]: running: modprobe "$MODALIAS"
# modprobe: module scsi:t-0x00 not found in modules.dep
# mdev[1277]: 49.658002 ACTION:add SUBSYSTEM:scsi_disk DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/target11:0:0/11:0:0:0/scsi_disk/11:0:0:0
# mdev[1278]: 49.659244 ACTION:add SUBSYSTEM:scsi_device DEVNAME:(null) DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/target11:0:0/11:0:0:0/scsi_device/11:0:0:
# mdev[1279]: 49.660535 ACTION:add SUBSYSTEM:bsg DEVNAME:bsg/11:0:0:0 DEVPATH:/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host11/target11:0:0/11:0:0:0/bsg/11:0:0:0
# mdev[1279]: mknod bsg/11:0:0:0 (253,1) 20660 0:0
# mdev[1280]: 49.663516 ACTION:add SUBSYSTEM:bdi DEVNAME:(null) DEVPATH:/devices/virtual/bdi/8:16
# mdev[1281]: 49.664748 ACTION:add SUBSYSTEM:block DEVNAME:sdb DEVPATH:/block/sdb
# mdev[1281]: mknod sdb (8,16) 60660 0:0
# mdev[1282]: 49.677597 ACTION:change SUBSYSTEM:block DEVNAME:sdb DEVPATH:/block/sdb
# mdev[1283]: 50.692936 ACTION:change SUBSYSTEM:block DEVNAME:sdb DEVPATH:/block/sdb
#
# We are hooking to the last events. To avoid having two scripts running,
# we check for DISK_MEDIA_CHANGE=1 (prev to last event has it,
# and it's the _only_ difference in env for these two events as of kernel 3.7.7)
# Unfortunately, there is no event for "user pressed [Turn USB storage] btn"!
# Script merely backgrounds and tries to rescan partition table for 1 minute:
ACTION=change;SUBSYSTEM=block;DISK_MEDIA_CHANGE=1;.* 0:0 660 */etc/mdev.conf.change_blockdev.sh