Commit Graph

1009 Commits

Author SHA1 Message Date
Denys Vlasenko
7fa799a97d less: switch off nonblock on kbd_fd before exit
This is only necessary if we use stdout fd.

function                                             old     new   delta
less_exit                                             32      51     +19
less_main                                           2540    2543      +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 22/0)               Total: 22 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-13 21:05:48 +02:00
Denys Vlasenko
3c0e579a06 less: fall back to using fd #1 for keyboard reading. Closes 9231
function                                             old     new   delta
less_main                                           2535    2540      +5

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-13 20:53:38 +02:00
Denys Vlasenko
6b76e23454 man: fix parsing of "DEFINE pager xyz". Closes 8976
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 21:41:05 +02:00
Denys Vlasenko
110c6bb413 less: fix bracket search to match behavior of less 481
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-16 15:27:30 +02:00
Denys Vlasenko
252559601f less: fix SEGV
testcase: echo "" | less, then press ')' key

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-16 15:09:40 +02:00
Denys Vlasenko
237bedd499 getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LIST
In many cases, this aqllows to drop use of opt_complementary.
Approximately -400 bytes:

function                                             old     new   delta
getopt32                                            1423    1502     +79
opt_string                                            17      18      +1
OPT_STR                                               24      25      +1
uniq_main                                            416     406     -10
timeout_main                                         279     269     -10
sulogin_main                                         270     260     -10
readprofile_main                                    1825    1815     -10
ps_main                                              543     533     -10
pidof_main                                           245     235     -10
pgrep_main                                           611     601     -10
od_main                                             2600    2590     -10
mkfs_minix_main                                     2684    2674     -10
mkfs_ext2_main                                      2603    2593     -10
microcom_main                                        712     702     -10
makemime_main                                        315     305     -10
ionice_main                                          282     272     -10
inetd_main                                          2074    2064     -10
ifplugd_main                                        1144    1134     -10
halt_main                                            353     343     -10
getopt_main                                          636     626     -10
fdisk_main                                          2854    2844     -10
env_main                                             206     196     -10
dmesg_main                                           319     309     -10
conspy_main                                         1214    1204     -10
awk_main                                             981     971     -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220)         Total: -139 bytes
   text	   data	    bss	    dec	    hex	filename
 919373	    906	  14060	 934339	  e41c3	busybox_old
 918969	    906	  14060	 933935	  e402f	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-06 21:58:02 +02:00
Bartosz Golaszewski
59f8197624 i2cdump: don't use common_bufsiz1
Commit e6a2f4cc changed the way common_bufsiz1 works. Now it needs to
be initialized before using, but i2cdump wasn't updated by said patch.

Since the fact that we're using common_bufsiz1 here isn't obvious (no
G_INIT() macro, no other global variables), drop it and simply
allocate the integer array required for block reads on the stack.

Tested with i2c block read on a Lenovo Thinkpad laptop.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-24 03:58:43 +02:00
Denys Vlasenko
7cf45ae10e setsid: fix broken -c
This did not work: setsid sh -c 'anything'

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20 23:50:26 +02:00
Denys Vlasenko
015db5800c randomconfig fixes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-19 18:15:33 +02:00
Denys Vlasenko
3e134ebf6a *: slap on a few ALIGN1/2s where appropriate
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"

   text	   data	    bss	    dec	    hex	filename
 829901	   4086	   1904	 835891	  cc133	busybox_before
 829665	   4086	   1904	 835655	  cc047	busybox

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22 18:09:21 +02:00
Denys Vlasenko
9de2e5a222 *: hopefully all setup_common_bufsiz() are in place
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21 18:38:51 +02:00
Denys Vlasenko
47cfbf32fd *: add most of the required setup_common_bufsiz() calls
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21 18:18:48 +02:00
Denys Vlasenko
e6a2f4cc5a libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for it
The config item is FEATURE_USE_BSS_TAIL. When it is off (default):

function                                             old     new   delta
read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
push                                                  46      44      -2
inetd_main                                          2136    2134      -2
uevent_main                                          421     418      -3
addLines                                              97      92      -5
bb_common_bufsiz1                                   8193    1024   -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181)        Total: -7119 bytes
   text	   data	    bss	    dec	    hex	filename
 829850	   4086	   9080	 843016	  cdd08	busybox_old
 829901	   4086	   1904	 835891	  cc133	busybox_unstripped

FEATURE_USE_BSS_TAIL=y:

read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
inetd_main                                          2136    2134      -2
bb_common_bufsiz1                                   8193       -   -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195)        Total: -8133 bytes
   text	   data	    bss	    dec	    hex	filename
 829850	   4086	   9080	 843016	  cdd08	busybox_old
 829911	   4086	    880	 834877	  cbd3d	busybox_unstripped

FIXME: setup_common_bufsiz() calls are missing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21 17:39:11 +02:00
Denys Vlasenko
6aab9928de whitespace and namespace cleanups
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03 22:24:51 +02:00
Sven Eisenberg
b068cf2a7e ubirmvol: Implement -N switch for ubirmvol
function                                             old     new   delta
get_volid_by_name                                      -     125    +125
ubi_devnum_from_devname                                -      43     +43
ubi_tools_main                                      1215    1220      +5
packed_usage                                       30674   30655     -19
ubirename_main                                       394     221    -173
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 1/2 up/down: 173/-192)          Total: -19 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03 22:01:43 +02:00
Sven Eisenberg
cb92640998 ubirename: new applet
function                                             old     new   delta
ubirename_main                                         -     394    +394
packed_usage                                       30611   30674     +63
applet_names                                        2530    2540     +10

Signed-off-by: Sven Eisenberg <sven.eisenberg@novero.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03 20:12:03 +02:00
Denys Vlasenko
066e76befe Replace a few more bb_info_msg's by bb_error_msg or printf
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-30 16:20:28 +02:00
Denys Vlasenko
76b680c7a8 Use bb_error_msg instead of bb_info_msg in all commented-out debug printouts
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-30 16:04:37 +02:00
Denys Vlasenko
23961b2fd3 more bionic fixes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-14 19:34:15 +01:00
Denys Vlasenko
dbb58a3879 fixes for problems found by bionic build
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-14 18:23:33 +01:00
Denys Vlasenko
7849ccb61c inotifyd: swap meaning of 'y' and 'm' events in help text. Closes 8726
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-06 17:35:16 +01:00
Arnout Vandecappelle (Essensium/Mind)
5fa9fefddc taskset: fix non-fancy cpuset printing on big-endian
The non-fancy version of the from_cpuset uses CPU_SETSIZE as if it
represents the number of bytes in the cpuset, while it is actually
the number of bits. This leads to out-of-bounds accesses on the
cpu_set_t in the big-endian case. Basically all uses of CPU_SETSIZE
have to be divided by 8. This is done correctly in the fancy version
of from_cpuset.

In addition, the big-endian case is completely wrong to begin with.
All standard C libraries that I know of implement cpu_set_t as an
unsigned long array, so both for big and little endian, the least
significant bits are in the beginning of the array. Therefore, the
approach taken for the little endian case is equally valid. We only
need special handling for big endian when CPU_SETSIZE is large and
we use an unsigned long long to get more bits out.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-26 14:36:24 +01:00
Denys Vlasenko
ccf7f0e4d3 setsid: implement -c
function                                             old     new   delta
setsid_main                                           53      96     +43
packed_usage                                       30846   30833     -13

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-17 01:10:53 +01:00
Aaro Koskinen
76915bf738 nandwrite: implement -n (read/write without ecc)
Implement -n (read/write without ecc).

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-02 01:33:01 +01:00
Denys Vlasenko
2cf4591413 i2c_tools: suppress "'blen' may be used uninitialized in this function"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:58:03 +01:00
Bartosz Golaszewski
5ed6989d80 i2cdump: display the numeric value for block read ioctl() errors
This makes busybox i2cdump compatible with the upstream version, which
also displays the numeric error value in case of a block read failure.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:10 +01:00
Bartosz Golaszewski
74bb9d5e63 i2cdump: bail-out if block read fails
We should bail-out if i2c_smbus_read_block_data() or
i2c_smbus_read_i2c_block_data() return 0 or less. Add the missing check
for the former and fix the existing for the latter.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:09 +01:00
Bartosz Golaszewski
1fe75b8ef1 i2cdump: use I2C block mode for the 'i' mode parameter
Currently we're calling i2c_smbus_read_block_data() for both 'i' and 's'
mode parameters. If the bus doesn't support SMBus block mode, then the
i2c access ioctl() fails. Make i2cdump behave compatibly with upstream
version by calling i2c_smbus_read_i2c_block_data() for I2C block.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:09 +01:00
Bartosz Golaszewski
1cde5f79d4 i2cdump: don't read block data in non-block modes
We currently read data twice in byte mode. Add a check to avoid calling
i2c_smbus_read_i2c_block_data() if we're not in I2C or SMBus block mode.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:09 +01:00
Bartosz Golaszewski
fc8eb056ea i2cdetect: coding style: add a space after 'for'
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:09 +01:00
Bartosz Golaszewski
99f025a499 i2cdetect: fix address skipping in auto mode
If the bus doesn't support SMBus Quick Write or Receive Byte commands
and we're running in auto mode all addresses will be skipped resulting
in an empty table being printed.

This is caused by not restoring the auto mode after it's been changed
for certain address ranges - we need an additional variable to hold the
temporary state.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01 20:55:09 +01:00
Timo Teräs
82c2fad26c fbsplash: use virtual y size in mmap size calculations
The virtual y can be larger - and we can be even writing there since
we are taking into account the y offset. Avoids possible crash.
But use it only if set, seems it is not set if virtual area is not
allocated (though, often fbcon allocates some scrollback area).

Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-27 21:32:00 +01:00
Denys Vlasenko
db700330d8 tweak defconfig
MONOTONIC_SYSCALL=y by default

FEATURE_LAST_SMALL is gone: now FEATURE_LAST_FANCY is a "bool", not a "choice".

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-25 20:36:03 +01:00
Denys Vlasenko
7b85ec30b5 *: more BUILD_BUG_ON conversions
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-13 17:17:34 +02:00
Denys Vlasenko
932302666b randconfig fix
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-11 16:58:18 +02:00
Denys Vlasenko
02859aaeb2 use auto_string() where appropriate to kill a few statics
Custom linker script 'busybox_ldscript' found, using it
function                                             old     new   delta
static.str                                             4       -      -4
static.passwd                                          4       0      -4
bb_ask                                               322     311     -11
ether_print                                           63      47     -16
UNSPEC_print                                          82      66     -16
INET_sprint                                           59      38     -21
INET6_sprint                                          54      30     -24
make_human_readable_str                              292     235     -57
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/7 up/down: 0/-153)           Total: -153 bytes
   text	   data	    bss	    dec	    hex	filename
 939880	    992	  17480	 958352	  e9f90	busybox_old
 939736	    992	  17456	 958184	  e9ee8	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-09 18:16:40 +02:00
Denys Vlasenko
7f3a2a2256 join some common strings, -400 bytes
function                                             old     new   delta
print_intel_cstates                                  499     511     +12
file_insert                                          355     364      +9
dpkg_main                                           2944    2940      -4
ifenslave_main                                       645     640      -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 21/-9)              Total: 12 bytes
   text	   data	    bss	    dec	    hex	filename
 937564	    932	  17676	 956172	  e970c	busybox_old
 937164	    932	  17676	 955772	  e957c	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-08 11:24:44 +02:00
Denys Vlasenko
d60752f8c9 build system: -fno-builtin-printf
Benefits are: drops reference to out-of-line putchar(), fixes a few cases
of failed string merge.

function                                             old     new   delta
i2cdump_main                                        1488    1502     +14
sha256_process_block64                               423     433     +10
sendmail_main                                       1183    1185      +2
list_table                                          1114    1116      +2
i2cdetect_main                                      1235    1237      +2
fdisk_main                                          2852    2854      +2
builtin_type                                         119     121      +2
unicode_conv_to_printable2                           325     324      -1
scan_recursive                                       380     378      -2
mkfs_minix_main                                     2687    2684      -3
buffer_fill_and_print                                178     169      -9
putchar                                              152       -    -152
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 7/4 up/down: 34/-167)          Total: -133 bytes
   text    data     bss     dec     hex filename
 937788     932   17676  956396   e97ec busybox_old
 937564     932   17676  956172   e970c busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-07 22:42:45 +02:00
Bartosz Golaszewski
2beb52499e i2c-tools: rename remaining defines
Rename the defines not present in linux UAPI headers to better reflect
their purpose.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-09-21 13:15:01 +02:00
Bartosz Golaszewski
d9892fa0c3 i2c-tools: remove duplicate definitions
Most applets include linux' user API headers instead of duplicating
the definitions. Make it the case for i2c-tools as well.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-09-21 13:15:00 +02:00
Ron Yorston
26ccd3d062 less: fix botched attempt to use last column
Commit 1ecb996 attempted to make read_lines() use the last column of
the terminal (as re_wrap() did).  There were two problems with this:

- The size of the buffer allocated for lines wasn't increased to allow
  for the extra character.

- The test for width overflow was moved after the point where the
  next character was added to the buffer.  This caused a buffer overflow
  in certain circumstances.

  For example, if the line beyond the end of the display was wider than
  the display read_lines() would initially read the partial line into a
  buffer.  When the user moved down read_lines() would be called again
  to ensure the rest of the line was read.  This would place the next
  character in the partial line before checking for overflow.

  This can be fixed by moving the test for overflow back to where it was
  before commit 1ecb996 and changing the comparison to `>` rather than
  `>=`.

There are two other places where buffers are created without allowing
for width+1 characters.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-08-16 18:54:49 +02:00
Ron Yorston
b27cf31003 less: further tweaks to regular file detection
Test explicitly for REOPEN flags:  update_num_lines is called
unconditionally so (num_lines != NOT_REGULAR_FILE) is also true when
num_lines contains a valid number of lines.

The call to fstat doesn't need to be in #if ENABLE_FEATURE_LESS_FLAGS:
the whole function is already in such a test.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-08-03 16:41:19 +02:00
Denys Vlasenko
9dc526d0f9 less: improve regular file detection in line counting code
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:42:20 +02:00
Ron Yorston
1ecb996fd2 less: allow use of last column of terminal
When read_lines tests whether a character will fit on the current
line it checks the *next* character but in case of overflow doesn't
display the *current* one.  This results in the last column of the
terminal never being used.

The test in re_wrap (used when the terminal width changes or line
numbers are enabled/disabled) is different:  it does allow the use
of the final column.

function                                             old     new   delta
read_lines                                           764     770      +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 6/0)                 Total: 6 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:22:09 +02:00
Ron Yorston
d542d183e1 less: fix line number confusion
Much of the code refers to lines using indices into the flines
array (which splits lines into portions that fit on the terminal).
In some cases this is wrong and actual line numbers should be
used:

- when lines are being truncated rather than wrapped (-S flag)
- when line numbers have been entered by the user

Also fix a bug in numeric input and improve the display at EOF.

function                                             old     new   delta
goto_lineno                                            -     111    +111
cap_cur_fline                                          -     101    +101
buffer_to_line                                         -      56     +56
buffer_up                                             35      66     +31
less_main                                           2606    2615      +9
goto_match                                           125     127      +2
buffer_down                                           81      56     -25
buffer_line                                           64       -     -64
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 3/1 up/down: 310/-89)           Total: 221 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:22:08 +02:00
Ron Yorston
ad1b4d5882 less: add a function to detect when display is at end of file
Add a function to package the test that detects whether enough has
been read from the file to allow a screenful to be displayed.

Also use this to determine when to display '(END)' in the status
line.  The previous code was incomplete and didn't handle truncated
lines (-S flag) properly.

function                                             old     new   delta
at_end                                                 -      63     +63
status_print                                         111     109      -2
read_lines                                           819     764     -55
getch_nowait                                         319     264     -55
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 63/-112)           Total: -49 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:22:08 +02:00
Ron Yorston
70b84be9e8 less: rearrange detection of non-regular files
Move the code to detect non-regular files to the point where the
file is being opened.  If num_lines == READING_FILE guarantees
that the file is regular.

Detect when a file becomes unreadable between it first being opened
and the call to update_num_lines.  Mark the file as being non-regular
so we don't try that again.

function                                             old     new   delta
reinitialize                                         197     245     +48
update_num_lines                                     159     127     -32
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 48/-32)             Total: 16 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:22:07 +02:00
Ron Yorston
159e032bf4 less: move code to count lines into a separate function
function                                             old     new   delta
update_num_lines                                       -     159    +159
m_status_print                                       409     266    -143
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 159/-143)           Total: 16 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 16:22:07 +02:00
Ron Yorston
ae1a9e899e less: fix numeric input
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31 15:33:53 +02:00
Ron Yorston
193ba408a4 less: improvements to verbose status messages
Make verbose status messages (-m/-M flags) behave more like the
real `less` command:

- fix display of line numbers so they're correct whether lines are
  being truncated (-S flag) or wrapped.
- don't display total lines or percentage when lines are read from
  stdin:  we don't have that information until we reach EOF.  When
  we do reach EOF the additional information is displayed.
- when lines are read from a file count the total number of lines
  so that we can display percentages.  Counting lines is avoided
  until the information is actually needed.  If the user pages to
  EOF the separate read pass can be avoided entirely.

Fixes Bug 7586

function                                             old     new   delta
m_status_print                                       195     382    +187
safe_lineno                                            -      35     +35
reinitialize                                         172     182     +10
read_lines                                           675     685     +10
buffer_fill_and_print                                178     169      -9
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/1 up/down: 242/-9)            Total: 233 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-21 22:28:09 +02:00