Commit Graph

3741 Commits

Author SHA1 Message Date
Eric Andersen
c601ff149a Begin using the new "select" option. Good stuff! 2003-08-08 23:12:12 +00:00
Eric Andersen
2e9c257000 Implement a minimalist 'last' which allows the LEAF project to
no longer need dumtp.  Remove the 'dumtp' applet.
 -Erik
2003-08-08 22:26:06 +00:00
Eric Andersen
f1c56a9306 quiet some noise 2003-08-08 22:13:41 +00:00
Eric Andersen
92fb9395f7 Kent Robotti noted that mt.c uses "rewind" not "rew" 2003-08-08 20:09:03 +00:00
Eric Andersen
99a75d1376 Patch from Kent Robotti to being fdisk in sync with v2.12 final. 2003-08-08 20:04:56 +00:00
Eric Andersen
de6a6ae876 Remove unnecessary defamatory comment 2003-08-08 08:57:03 +00:00
Eric Andersen
6c0e0fb8ac Fix a stupid bug I introduced several months ago 2003-08-08 07:39:57 +00:00
Eric Andersen
3869f66eac Begin preparing for another release 2003-08-06 11:22:36 +00:00
Eric Andersen
9089844382 Latest dash update from vodz 2003-08-06 11:20:52 +00:00
Eric Andersen
dc19af4179 Patch from Eric Spakman to update "run-parts" help text in Config.in. 2003-08-06 09:43:09 +00:00
Eric Andersen
fdd2a0f318 Eric Spakman writes:
The attached patch adds "mtu" and "hwaddress" to the inet6 method and
"mtu", "hwaddr" and "pointopoint" to the inet4 method (just like in
the ifupdown part).
Note: "hwaddress" can't be used with the busybox ip applet (this
function isn't implemented in bb ip yet), but it can be of use with
an external "full blown" ip package.

The patch also removes "label" from the loopback configuration,
labels (subinterfaces) aren't used with loopback interfaces.

It further solves a problem in the bootp method, "ifconfig down
%interface%" should be "ifconfig %interface% down" and it's now also
possible to use ip with bootp.

The patch is fully tested with both busybox ip and "stand-alone" ip
and I didn't saw any problems.
2003-08-06 09:23:44 +00:00
Eric Andersen
d3652bf334 Patch from vodz:
I wrote:
>>I think, fdisk have special ext2lseek special for:
>>disk can have size > 4Gb, but all any partitions have < 4Gb and lseek64
>>not require.
>>May be best create new configure option for set DOLFS for fdisk applet
>>if global DOLFS unset?
>


Erik Andersen wrote:
>Agreed.  Using an extra configure option when ! DOLFS
>would be a good idea.


Ok. Patch attached.
2003-08-06 09:07:37 +00:00
Eric Andersen
0a57a79e38 Patch from Steven Scholz:
should we rename the define into CONFIG_FEATURE_HDPARM_HDIO_DMA and
use it for "set" and "get" ???

Since although CONFIG_FEATURE_HDPARM_HDIO_GET_DMA is _not_ set I still
can use "hdparm -d 1 /dev/hda" to switch the DMA on.
Is this desireable or meant to be like that?

So how about the applied patch?
2003-08-06 08:57:35 +00:00
Eric Andersen
4b4e09854c Steven Scholz writes:
the output of lsmod (busybox-1.00-pre2) contains IMHO one "\n" too
    much when using CONFIG_FEATURE_CHECK_TAINTED_MODULE:

    ~ # lsmod
    Module                  Size  Used by    Tainted: P

    ds                      8364   1
    m8xx_pcmcia             5388   1
    pcmcia_core            40736   0 [ds m8xx_pcmcia]

and this patch from Steven fixes the problem
2003-08-06 08:53:13 +00:00
Eric Andersen
50af12dbd6 Sync hdparm -t and -T options with hdparm-5.3, which seems
to produce sensible results,
2003-08-06 08:47:59 +00:00
Eric Andersen
481772a4c2 Patch from vodz to cleanup libbb/obscure.c:password_check()
to not copy too much data.
2003-08-06 08:33:08 +00:00
Eric Andersen
5378fbcb33 Joe.C writes:
I've reported this bug in April and it still
    exists in 1.00-pre2. So I made patches for
    both 0.60.x and 1.00-pre2.  The patch is very
    simple, just use strncmp instead of strcmp.
    Please apply if it is OK.

   Here's the procedure to test this problem:
   Create a executable with very long name, say
   'test_1234567890123456' and execute it. Try
   using 'killall' or 'pidof' to find/kill this
   program.  Without this patch, you can't find
   the program.
2003-08-06 08:22:10 +00:00
Eric Andersen
8f4ef159f0 Fixup segfault on 'kill -q' 2003-08-06 07:43:58 +00:00
Eric Andersen
c774efe317 extern inline is a bad bad thing. kill it (so mkfs_minix.c will
actually compile)
2003-08-06 07:34:19 +00:00
Eric Andersen
7001480a5e Seems I missed a spot 2003-08-05 05:59:48 +00:00
Eric Andersen
72d8e444f0 Merge/rework config system per the latest from linux-2.6.0-test2.
Fix the config bugs revealed by the updated config system.
 -Erik
2003-08-05 02:18:25 +00:00
Manuel Novoa III
461c279ac1 Might as well get my name in AUTHORS before 1.0... 2003-08-02 00:19:29 +00:00
Manuel Novoa III
b1d5b741ac Save 0.5K. 2003-08-02 00:04:18 +00:00
Eric Andersen
546f21aa2d Remove code that too agressively disabled inlines 2003-08-01 22:27:57 +00:00
Eric Andersen
e6b811583a Minor cleanup 2003-07-31 17:50:17 +00:00
Glenn L McGrath
91e464632b Fix bug when handling debian packages.
If we read the contents of compressed files within the ar archive,
e.g. control.tar.gz, then file position gets all out of whack, so
it has to be reset before reading thenext header.
2003-07-31 01:53:50 +00:00
Eric Andersen
6a9ca985b8 Remove LRP (now defunct) and replace it with leaf. 2003-07-30 17:17:33 +00:00
Eric Andersen
7a6a77362b Update webpage and changelog for release 2003-07-30 09:33:54 +00:00
Eric Andersen
25f95dee2d Lars Ekman writes:
When using "losetup" the device is always setup as Read-Only.

(I have only tested with the -o flag, but looking at the code the
 problem seems general)

The problem is the "opt" variable in "losetup.c" that is reused in
the "set_loop()" call. Clear it before the call and everything is OK;

  opt = 0;         /* <-------- added line */
  if (delete)
    return del_loop (argv[optind]) ? EXIT_SUCCESS : EXIT_FAILURE;
  else
    return set_loop (argv[optind], argv[optind + 1], offset, &opt)
      ? EXIT_FAILURE : EXIT_SUCCESS;
}

Best Regards,
Lars Ekman
2003-07-30 08:55:59 +00:00
Eric Andersen
040f440262 last_patch100 from vidz updating fdisk to 2.12pre 2003-07-30 08:40:37 +00:00
Eric Andersen
08804ceaf1 Do not require that the signal number be specified 2003-07-30 08:29:56 +00:00
Eric Andersen
76097edc0e Eric Spakman writes:
The recent changes in ifupdown where all calls to 'ip link set' and
'ip addr set' are swapped give some problems with v4tunnels.
For plain ipv4 and ipv6 interfaces it works correct, other methods
not tried. The patch below change the behaviour back for v4tunnels
only.

Without the patch the following errors are shown:
RTNETLINK answers: Network is down
RTNETLINK answers: No route to host
and the tunnel is not fully brought up

With this patch all works as expected.
2003-07-30 08:22:53 +00:00
Eric Andersen
3124a9ecee Vladimir N. Oleynik writes:
This moment have algoritmicaly problem, not overflow:
    strcat(wrapped, wrapped) - may be looped.

    Hand patch:

    - else if (strstr(strcat(wrapped, wrapped), newmono))
    + else {
    +    safe_strncpy(wrapped + lenwrap, wrapped, lenwrap + 1);
    +    if (strstr(wrapped, newmono))
    +}

    --w
    vodz
2003-07-30 07:57:06 +00:00
Eric Andersen
b99aec0ba5 Christian Meyer provided this patch to fix more bugs with the tftp client 2003-07-30 07:16:39 +00:00
Eric Andersen
d8ceba959a Ronny L Nilsson writes:
The login process should always timeout if user don't login sucessfully within
reasonable time. Otherwise we're sensetive to a DOS attack by simply doing a
bunch of simultaneous telnet connections (deploys all availible TTY's).

This patch make login.c terminate the connection after  "TIMEOUT" seconds.
2003-07-30 06:56:07 +00:00
Eric Andersen
eef2317b9f Ronny L Nilsson writes:
If BusyBox was compiled with -DCONFIG_FEATURE_CLEAN_UP dmesg command
    segfaults if invoked with the "-n" option. (Due to a free() of an
    uninitialized pointer).
2003-07-30 06:52:33 +00:00
Eric Andersen
eac20451d2 Set libbb dead last in the link order 2003-07-29 07:45:05 +00:00
Eric Andersen
c663ab0c6b Match up interfaces 2003-07-29 07:37:39 +00:00
Eric Andersen
ca16204c31 Fixup typo noticed by Nick Fedchik 2003-07-29 07:15:17 +00:00
Eric Andersen
2a186890ee Bruno Randolf writes:
this patch fixes run_parts when it's called by ifupdown. 1) argv has to be a
NULL terminated char* array, not just a string. 2) run_parts now explicitly
sets the environment. this environment is populated from the
/etc/network/interfaces config file and is needed by the scripts in
/etc/network/if-pre-up.d/. when run-parts is called from the command line the
environment is taken from the current process.


Vladimir Oleynik then wrote:

You can simplify this if use:

+       bb_xasprintf(&buf[0], "/etc/network/if-%s.d", opt);
+       buf[1] = NULL;
+
+       run_parts(&buf, 2, environ);
+       free(buf[0]);

--w
vodz
2003-07-29 07:05:40 +00:00
Eric Andersen
81fe123040 Vladimir N. Oleynik writes:
Last patch have synced form Manuel Nova III xxreadtoken() function,
corrected (C) form dash debian/copyright, removed my small mistake
with IFS_BROKEN (thanks by Herbert), and synced cmdedit.c from
current CVS (removed libc5 support, your email correction, my (C) year
corertion).
2003-07-29 06:38:40 +00:00
Eric Andersen
9cdef5d928 Yang Xiaopeng writes:
>I'm sure that no user process use old root now,  but when run "umount
>/old_root", it says:
>   umount: /old_root: Device or resource busy
>
>I have tried to remount /proc within the new root *after* chroot, but
>get the same result.
>
>
I found the problem, I said that no user process use old root when run
my scripts, but
I'm wrong, actually there is a '3' fd open the file
"/old_root/dev/console". By adding
debug message in init/init.c, I found the problem: when init restart(in
exec_signal()),
before open the new terminal device, there is still a file opened(I
don't know which file it is), so the
terminal device(stdin) get fd '1', and the first dup(0)(stdout) return
'2', the second(stderr) return '3'.

I attach a simple patch to solve this problem.
2003-07-29 06:33:12 +00:00
Eric Andersen
930c59675a bump version to 1.0.0-pre2 2003-07-28 10:34:38 +00:00
Eric Andersen
cad4c5b0f3 A small update to the new docs. Plenty more is needed... 2003-07-28 10:13:03 +00:00
Eric Andersen
4052051864 Patch from vodz to update httpd usage 2003-07-28 09:59:05 +00:00
Eric Andersen
c470f4477a This is synced from dash-0.4.17 and full ready for insert to new busybox
version:
ftp://ftp.simtreas.ru/pub/my/bb/new

News:

- code is smalest!
- support ${var...} expr
- used new very strongly steal controlling terminal
2003-07-28 09:56:35 +00:00
Eric Andersen
9b47661165 Avoid shadowing built-in function `log' 2003-07-28 09:37:56 +00:00
Eric Andersen
68d4a85f12 Fixup bugs in last patch 2003-07-28 09:31:28 +00:00
Eric Andersen
f3a02bbf41 Update docs a bit 2003-07-28 08:31:56 +00:00
Eric Andersen
05df91a3ac last_patch98 from vodz:
Denis,

># ./busybox env - echo zzz
>zzz
># ./busybox echo -n zzz
>zzz
># ./busybox env - echo -n zzz
>env: invalid option -- n
>
>       obviously, env tried to understand -n as env's option
>       instead of blindly passing it to echo...
>
>BusyBox v1.00-pre1 (2003.07.16-07:53+0000) multi-call binary
>
>Usage: env [-iu] [-] [name=value]... [command]

Ah, you found very old problem.
Last patch also have:

- multiple "-u unsetenv" support
- GNU long option support
- save errno after exec failed before bb_perror_msg()


--w
vodz
2003-07-28 07:42:19 +00:00