Commit Graph

244 Commits

Author SHA1 Message Date
"Vladimir N. Oleynik"
ba248206fe change strange depend to libbb.h, but require busybox.h 2005-10-06 15:18:09 +00:00
Mike Frysinger
f87b3e30a7 as pointed out in Bug 17, use uint32_t instead of unsigned long since the code expects the size of the info variables to be 32bits and sizeof(long) on 64bit hosts is not 32bits 2005-09-27 04:16:22 +00:00
Mike Frysinger
de2b93859c eat misappropriated whitespace 2005-09-27 03:18:00 +00:00
Mike Frysinger
10a11e23ba uncuddle function scope brackets 2005-09-27 02:23:02 +00:00
Mike Frysinger
62f18e1f20 use the shorter license header 2005-09-24 07:16:29 +00:00
Mike Frysinger
0d4ee68be5 use brief license line 2005-09-24 06:01:57 +00:00
Paul Fox
c350485b18 initialize a couple of vars whose warnings were suppressed because
i was building w/ debug on before, which suppresses optimization.
2005-09-16 12:48:18 +00:00
Paul Fox
8552aec7fd some combinations of status line and screen refresh don't give a
correct screen, and bug 215 reports trouble with the status line
on small screens.

with this change a) the status line should always be refreshed
properly, b) the status line is a little shorter than it used to
be ("I" instead of "--INSERT--"), c) the status line will be
truncated if it doesn't fit on the screen, and d) if the screen
is too narrow for an error or transient status message (from
psb() or psbs()), then that message will be followed by a "Hit
Return" prompt.  (it wasn't until i did this last bit that the
size grew.  with this, these changes add about 150 bytes.)

- pgf
2005-09-16 12:20:05 +00:00
"Vladimir N. Oleynik"
23f62fc6f3 split libbb: moved xregcomp separatelly for speed up recompile 2005-09-14 16:59:11 +00:00
"Vladimir N. Oleynik"
b4f3cff6f5 removed strange extern void xregcomp(... from some applets, but declared from libbb.h 2005-09-14 16:22:50 +00:00
Paul Fox
f2de0b7ae4 allow either backspace or DEL, in addition to the user's erase
char, to be used in get_input_line()
2005-09-13 22:20:37 +00:00
Rob Landley
babd3fbba6 Missing break was screwing up 'y//' command. Bug #248. 2005-09-02 00:10:06 +00:00
Rob Landley
078bacf1e9 Patch -i support from Berhnard Fischer. 2005-09-01 03:02:23 +00:00
Mike Frysinger
4d00896d05 use toplevel ARFLAGS and update default ARFLAGS to be quiet 2005-07-27 01:09:24 +00:00
Paul Fox
18433aadf6 applying fix for:
0000118: vi join command does not mark file as modified for certain lines.
2005-07-20 17:39:52 +00:00
Paul Fox
d13b90b9e8 allow both ^H and DEL to backspace in insert mode (bug #23) 2005-07-18 22:17:25 +00:00
Eric Andersen
0ef24c672a Fix vi so that error messages, insert mode messages, etc are
all actually displayed in the status line as expected
2005-07-18 10:32:59 +00:00
Rob Landley
ed830e8693 Patch from Dmitry Zakharov:
Charlie Brady wrote:
> Here's another awk parsing problem - unary post increment - pre is fine:
>
>bash-2.05a$ echo 2,3 | gawk -F , '{ $2++ }'
>bash-2.05a$ echo 2,3 | /tmp/busybox/busybox awk -F , '{ $2++ }'
>awk: cmd. line:1: Unexpected token
>
Here's a fix for this. There is another problem with constructions like 
"print (A+B) ++C", I don't
know whether somebody uses such constructions (fixing both these 
problems would require very
serious change in awk code).
2005-06-07 02:43:52 +00:00
Rob Landley
93850a56b2 Patch from Colin Watson (mangled slightly by Rob Landley):
This patch implements the 'T' command in sed. This is a GNU extension,
but one of the udev hotplug scripts uses it, so I need it in busybox
anyway.

Includes a test; 'svn add testsuite/sed/sed-branch-conditional-inverted'
after applying.
2005-05-18 06:34:37 +00:00
Rob Landley
5797c7f0ef Doug Swarin pointed out a security bug in the -i option of sed.
While the permissions on the temp file are correct to prevent it from being 
maliciously mangled by passing strangers, (created with 600, opened O_EXCL, 
etc), the permissions on the _directory_ might not be, and we re-open the 
file to convert the filehandle to a FILE * (and automatically get an error 
message and exit if the directory's read-only or out of space or some such).

This opens a potential race condition if somebody's using dnotify on the 
directory, deletes/renames the tempfile, and drops a symlink or something 
there.  Somebody running sed -i as root in a world writeable directory could 
do damage.

I dug up notes on an earlier discussion where we looked at the security 
implications of this (unfortunately on the #uclibc channel rather than email; 
I don't have a transcript, just notes-to-self) which pointed out that if the 
permissions on the directory allow other people's files to be deleted/renamed 
then the original file is vulnerable to sabotage anyway.  However, there are 
two cases that discussion apparently didn't take into account:

1) Using another user's permissions to damage files in other directories you 
can't access (standard symlink attack).

2) Reading data another user couldn't otherwise access by having the new file 
belong to that other user.

This patch uses fdopen to convert the filehandle into a FILE *, rather than
reopening the file.
2005-05-18 05:56:16 +00:00
Eric Andersen
14f5c8d764 Patch from Bernhard Fischer to make a bunch of symbols static
which were otherwise cluttering the global namespace.
2005-04-16 19:39:00 +00:00
Mike Frysinger
4e5936ef95 In Bug 208, bernhardf writes:
On machines with only ANSI compliant compilers, not explitily delcaring
an empty parameter list 'void' causes failure.
2005-04-16 04:30:38 +00:00
Rob Landley
dcc286607c Hiroshi found another bug. Currently sed's $ triggers at end of every file,
and with multiple files SuSv3 says it should only trigger at the end of the
LAST file.

The trivial fix I tried first broke if the last file is empty.  Fixing this
properly required restructuring things to create a file list (actually a
FILE * list), and then processing it all in one go.  (There's probably a
smaller way to do this, merging with append_list perhaps.  But let's get
the behavior correct first.)

Note that editing files in place (-i) needs the _old_ behavior, with $
triggering at the end of each file.

Here's a test of all the things this patch fixed.  gnu and busybox seds produce
the same results with this patch, and different without it.

echo -n -e "1one\n1two\n1three" > ../test1
echo -n > ../test2
echo -e "3one\n3two\n3three" > ../test3
sed -n "$ p" ../test1 ../test2 ../test3
sed -n "$ p" ../test1 ../test2
sed -i -n "$ p" ../test1 ../test2 ../test3
2004-11-25 07:21:47 +00:00
Rob Landley
ce4f0e982b Hiroshi Ito found some bugs. The 'c' command (cut and paste) was hardwired
to not put a newline at the end (which was backwards, it should have been
hardwired _to_ put a newline at the end, whether or not the input line
ended with a newline).  Test case for that:

echo | sed -e '$ctest'

And then this would segfault:

echo | sed -e 'g'

Because pattern_space got freed but the dead pointer was only overwritten
in an if statement that didn't trigger if the hold space was empty.  Oops.

While debugging it, I found out that the hold space is persistent between
multiple input files, so I promoted it to a global and added it to the
memory cleanup.  The relevant test case (to compare with That Other Sed) is:

echo -n woo > woo
sed -e h -e g woo
echo "fish" | sed -e '/woo/h' -e "izap" -e 's/woo/thingy/' -e '/fish/g' woo -

And somebody gratuitously stuck in a c99 int8_t type for something that's just
a flag, so I grouped the darn ints.
2004-10-30 06:54:19 +00:00
Eric Andersen
7daa076d3e egor duda writes:
Hi!

I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.

That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.

I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.

'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.

One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.

egor
2004-10-08 07:46:08 +00:00
Glenn L McGrath
ca29ffc206 Patch from Dmitry Zakharov to fix a bug triggered by freeswan's scripts. 2004-09-24 09:24:27 +00:00
Eric Andersen
a9eb33ddc7 regularly update the status line display
-Erik
2004-08-19 19:15:06 +00:00
Eric Andersen
67776bef59 Simon Poole reports that awk segfaults when environment variables
with no value exist, i.e.

	$ export BOB=''
	% ./busybox awk
	Segmentation fault

This patch teaches awk to not blow chunks on empty env variables.
 -Erik
2004-07-30 23:52:08 +00:00
Glenn L McGrath
1fbc909570 Patch from Dmitry Zakharov to fix a bug discovered via the freeswap
script.
2004-07-23 02:11:25 +00:00
Eric Andersen
165e8cbf34 Assign 'forced' before the goto to avoid a warning 2004-07-20 06:44:46 +00:00
Eric Andersen
9855548a77 Rob Landley writes:
add sed -r support.

I bumped into a couple of things that want to use extended regular expressions
in sed, and it really isn't that hard to add.  Can't say I've extensively
tested it, but it's small and isn't going to break anything that doesn't use
it, so...

Rob
2004-05-26 10:03:33 +00:00
Glenn L McGrath
21d7d61de1 Use int instead of char for return type, in theory avoiding a cast 2004-05-16 02:35:49 +00:00
Glenn L McGrath
5d2edbf16d Fix for debian bug #248106, should use int for returned getopt value. 2004-05-10 08:59:17 +00:00
Glenn L McGrath
c6992feee3 Update my email address, document some of my tasks in the AUTHORS file 2004-04-25 05:11:19 +00:00
Eric Andersen
b94669543d This sed patch can only be described as "duh". Stat the source file, chmod
the _destination_ file.  (Ah hah!  That works _much_ better...)  I
implemented the behavior, I just forgot to test this corner of it.  My fault,
sorry...

No, gnu sed -i doesn't preverve ownership information.  I checked.
Permissions, yes, ownership info, no.

Rob
2004-04-21 00:57:14 +00:00
Eric Andersen
faa7d863fc So I'm building a linux from scratch system, using a working script to do this
that the _only_ change to is that gnu sed has been replaced with busybox sed.
And ncurses' install phase hangs.  I trace it down, and it's trying to run
gawk.  (Insert obligatory doubletake, but this is FSF code we're talking
about, so...)

It turns out gawk shells out to sed, ala "sed -f /tmp/blah file.h".  The
/tmp/blah file is basically empty (it contains one character, a newline).  So
basically, gawk is using sed as "cat".  With gnu sed, it works like cat,
anyway.

With busybox sed, it tests if its command list is empty after parsing the
command line, and if the list is empty it takes the first file argument as a
sed command string, and if that leaves the file list empty it tries to read
the data to operate on from stdin.  (Hence the hang, since nothing's coming
in on stdin...)

It _should_ be testing whether there were any instances of -f or -e, not
whether it actually got any commands.  Using sed as cat may be kind of
stupid, but it's valid and gawk relies on this behavior.

Here's a patch to fix it, turning a couple of ints into chars in hopes of
saving a bit of the space this adds.  Comments?

Rob
2004-04-21 00:56:22 +00:00
Eric Andersen
aff114c33d Larry Doolittle writes:
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.

Erik - please apply.

Authors - please check that I didn't corrupt any meaning.

Package importers - see if any of these changes should be
passed to the upstream authors.

I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.

What is "pretect redefined for test" in cmdedit.c?

Good luck on the 1.00 release!

      - Larry
2004-04-14 17:51:38 +00:00
Rob Landley
25d82397f7 The last patch broke:
sed -i "/^boo/a fred" ipsec.conf

Which works in gnu sed.  (And is _supposed_ to strip all the whitespace before
"fred".)

It also broke:
sed -i -e "/^boo/a \\" -e "   fred" ipsec.conf

I.E. there can legally be spaces between the a and the backslash at the end of
the line.

And strangely enough, gnu sed accepts the following syntax as well:
sed -i "/^boo/a \\  fred" ipsec.conf

Which is a way of having the significant whitespace at the start of the line,
all on one line.  (But notice that the whitespace BEFORE the slash is still
stripped, as is the slash itself.  And notice that the naieve placement of
"\n" there doesn't work, it puts an n at the start of the appended line.  The
double slashing is for shell escapes because you could escape the quote, you
see.  It's turned into a single backslash.  But \n there is _not_ turned into
a newline by the shell.  So there.)

This makes all three syntaxes work in my tests.  I should probably start
writing better documentation at some point.  I posted my current sedtests.py
file to the list, which needs a lot more tests added as well...
2004-04-01 09:23:30 +00:00
Eric Andersen
46390ed829 Junio Hamano, junio at twinsun dot com writes:
The sed command in busybox 1.0.0-pre8 loses leading whitespace
in 'a' command ('i' and 'c' commands are also affected).  A
patch to fix this is attached at the end of this message.

The following is a transcript that reproduces the problem.  The
first run uses busybox 1.0.0-pre3 as "/bin/sed" command, which
gets the expected result.  Later in the test, /bin/sed symlink
is changed to point at busybox 1.0.0-pre8 and the test script is
run again, which shows the failure.

=== reproduction recipe ===
* Part 1.  Use busybox 1.0.0-pre3 as sed; this works.

root# cd /tmp
root# cat 1.sh
#!/bin/sh

cd /tmp
rm -f ipsec.conf ipsec.conf+
cat >ipsec.conf <<\EOF
version 2.0

config setup
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
EOF
sed -e '/^config setup/a\
	nat_traversal=yes' ipsec.conf >ipsec.conf+
mv -f ipsec.conf+ ipsec.conf
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
        nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0

config setup
        nat_traversal=yes
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
root# sed --version
sed: invalid option -- -
BusyBox v1.00-pre3 (2004.02.26-18:47+0000) multi-call binary

Usage: sed [-nef] pattern [files...]

* Part 2.  Continuing from the above, use busybox 1.0.0-pre8
  as sed; this fails.

root# ln -s busybox-pre8 /bin/sed-8
root# mv /bin/sed-8 /bin/sed
root# sed --version
This is not GNU sed version 4.0
root# sed --
BusyBox v1.00-pre8 (2004.03.30-02:44+0000) multi-call binary

Usage: sed [-nef] pattern [files...]
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
        nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0

config setup
nat_traversal=yes
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
root#
=== reproduction recipe ends here ===

This problem was introduced in 1.0.0-pre4.  The problem is that
the command argument parsing code strips leading whitespaces too
aggressively.  When running the above example, the piece of code
in question gets "\n\tnat_traversal=yes" as its argument in
cmdstr variable (shown part in the following patch).  What it
needs to do at this point is to strip the first newline and
nothing else, but it instead strips all the leading whitespaces
at the beginning of the string, thus losing the tab character.
The following patch fixes this.
2004-03-31 11:42:40 +00:00
Eric Andersen
90fb65f7a6 Patch from Thomas Winkler -- vi -R did not work 2004-03-31 11:12:51 +00:00
Eric Andersen
c7bda1ce65 Remove trailing whitespace. Update copyright to include 2004. 2004-03-15 08:29:22 +00:00
Glenn L McGrath
4bded58207 Patch from Dmitry Zakharov, this line was missedfrom the last patch 2004-02-22 11:55:09 +00:00
Rob Landley
53302f80da Add -i option to sed, to edit files in-place. 2004-02-18 09:54:15 +00:00
Eric Andersen
5cc90eade5 Richard Kojedzinszky writes:
Hi All,

I aplogoize for the mistake, but i have just recognized that somehow the
last patch I sent in was wrong, and a '0' was instead of a '-1'. Because
of this, vi does behave the wrong way. So again, it should be the last
patch for vi. This is for pre7.
2004-02-06 10:36:08 +00:00
Eric Andersen
aeea32ca69 Richard Kojedzinszky writes:
Hi,

I've noticed the bug also, and here is another patch for it. I hope it'll
not introduce more bugs. Not too nice, but works for me.

Here it is for busybox-1.00-pre6
2004-02-04 11:19:44 +00:00
Eric Andersen
c06f568dda Rob Landley writes:
While building glibc with busybox as part of the development environment, I
found a bug in glibc's regexec can throw sed into an endless loop.  This
fixes it.  Should I put an #ifdef around it or something?  (Note, this patch
also contains the "this is not gnu sed 4.0" hack I posted earlier, which is
also needed to build glibc...)
2004-02-04 10:57:46 +00:00
Glenn L McGrath
ee829065cb Patch by Richard Kojedzinszky, when using END at end of lines it was
skipping to next line, cw command was leaving one char in buffer
2004-01-21 10:59:45 +00:00
Rob Landley
40ec4aeb8e Thinko in s//options. (Whitespace skipping in the wrong place.) 2004-01-04 06:42:14 +00:00
Eric Andersen
d10f36fe2e Match changes made to cmdedit 2003-12-23 20:45:14 +00:00
Eric Andersen
52a3c2726e Patch from Matt Kraai:
sed is broken:

 busybox sed -n '/^a/,/^a/p' >output <<EOF
 a
 b
 a
 b
 EOF
 cmp -s output - <<EOF
 a
 b
 a
 EOF

The attached patch fixes it.
2003-12-23 08:53:51 +00:00