Commit Graph

39 Commits

Author SHA1 Message Date
Bernhard Reutner-Fischer
df10094870 - revert back to r14406 2006-03-13 19:04:00 +00:00
Bernhard Reutner-Fischer
022eb311d5 - use absolute path for top_builddir and top_srcdir.
Fixes make trying to include the very same file in an endless loop.
2006-03-02 17:33:25 +00:00
Bernhard Reutner-Fischer
5d26126b9e - fixes parallel builds (make -j)
- use less resources for the buildsystem itself
2006-03-01 22:54:48 +00:00
Rob Landley
e7c43b66d7 Cleanup patch from Denis Vlasenko. Mostly variants of removing the if(x)
from before "if(x) free(x)".
2006-03-01 16:39:45 +00:00
Rob Landley
0d8766a3b1 Rename UNUSE() to SKIP(). 2006-02-20 23:05:06 +00:00
"Vladimir N. Oleynik"
cb9b114d35 isolate and show busybox`s changes 2006-02-16 14:28:17 +00:00
"Vladimir N. Oleynik"
6732af2766 full removed config.h, use bb_config.h only 2006-02-15 12:29:37 +00:00
Mike Frysinger
b38673fb9f make the build system puuuuuuuuuuurty 2006-02-02 01:41:53 +00:00
"Vladimir N. Oleynik"
4d57926bd3 removed unneed signed, avoid warning 2006-01-31 11:57:06 +00:00
Tim Riker
c1ef7bdd8d just whitespace 2006-01-25 00:08:53 +00:00
Rob Landley
7a43bd07e6 Zap sysdeps directory, moving Config.in and defconfig to top of tree.
(Busybox should not be system dependent enough to have different default
configurations for different platforms.  We're not a kernel.)
2006-01-20 17:47:09 +00:00
Rob Landley
9a1e25d994 Make a few warnings go away. 2005-12-19 16:30:33 +00:00
Rob Landley
bfd94c4331 Whitespace patch (and removal of gratuitous use of cat) by Berhnard Fischer. 2005-09-15 18:33:30 +00:00
Rob Landley
2ee82723a8 Our config should write out each symbol once and only once, but still write
out all symbols in all sub-menus.  I think this finally does it right.
2005-09-14 14:40:01 +00:00
Rob Landley
6b00d0d3ca Put the menu_is_visible test back because it avoids printing spurious
(albeit commented out) garbage.
2005-09-08 11:50:48 +00:00
Rob Landley
8f99104362 The previous commit left confdata writing out:
CONFIG_NUMERIC_CONSTANT=

And on reading it back in, it would complain that '' was an invalid value for
that field.  I.E. "make allnoconfig && make" worked fine, but
"make allnoconfig && make menuconfig" barfed reading in the config file.

So now I have it write out "0" as the blank value.  (It's initialized to the
default value when the menu becomes visible anyway; I checked.)  That seems
to work.
2005-09-05 11:04:30 +00:00
Rob Landley
8a7a678b03 Fixes so "make allnoconfig" works again.
The configure system's save function edited out sub-menus that wouldn't be
displayed in the current configuration, meaning config.h wouldn't have #udef
entries for those symbols, meaning bb_config.h would have the relevant
ENABLE_ missing instead of defined to 0.  This broke the build.

So I fixed it, and then reorganized the applets.c and busybox.c to take
away the warnings this revealed (code that would be optimized out was making
calls to functions that hadn't been prototyped.  So I added an #else case
to those #ifdefs to #define the relevant functions to empty macros to
placate the warnings.

I also reorganized the applets.c code to make adding such an #else case less
of a pain (and make the need for prototyping go away by moving the functions
up before they were used, and generally wind up with fewer #ifdefs in
the code by putting all the logic in one place).  This resulted in a huge
seeming patch, when most if it just moves code from one place to another
without touching it...

Upside: make allyesconfig and make allnoconfig should both work now.
2005-09-05 04:13:33 +00:00
Rob Landley
e1d9633e20 Bernhard Fischer submitted a couple of Makefile patches:
- Fix building out-of-tree
- remove duplicate rule in toplevel Makefile
- peruse make's builtin notion of `dirname $@'
2005-08-24 00:41:52 +00:00
Eric Andersen
ff3a61b71d Do not define 'AUTOCONF_INCLUDED' 2005-08-02 00:59:44 +00:00
Paul Fox
79c142d938 new config display applet, from bug 46. i've changed the name
of the applet from "config" to "bbconfig", and renamed the
source filenames and symbols to match appropriately.
2005-08-01 16:04:40 +00:00
Peter Kjellerstedt
bae38db8e4 Updated to match trunk/uClibc/extra/config as of r10132, and thus
Linux 2.6.11.
2005-04-19 09:55:06 +00:00
Mike Frysinger
a9ae74d25b bernhardf reports with Bug 210:
For certain non-gcc compilers, alloca_h is defined (included) but there, 
no alloca() is declared.  Fallback to malloc if _ALLOCA_H is defined but 
still, there is no alloca() in the included _ALLOCA_H.
2005-04-16 04:06:14 +00:00
Eric Andersen
9e954abc4f As noticed by egor duda, current_menu is declared as 'extern struct menu
*current_menu;' in scripts/config/lkc.h line 63, and this conflicts with
static definition in mconf.c.
2004-10-08 07:58:30 +00:00
Eric Andersen
7daa076d3e egor duda writes:
Hi!

I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.

That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.

I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.

'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.

One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.

egor
2004-10-08 07:46:08 +00:00
Eric Andersen
837f058fb3 Peter Kjellerstedt at axis.com writes:
Hello,

the attached patch should bring extra/config in line
with the Linux 2.6.7 sources.

The following are the commit messages for the respective
files from the Linux bk-repository:

checklist.c:
* fix menuconfig choice item help display

confdata.c:
* config: choice fix
* kconfig: don't rename target dir when saving config

expr.c, expr.h:
* config: disable debug prints

mconf.c:
* fix menuconfig choice item help display

menu.c:
* Kconfig: use select statements

symbol.c:
* config: choice fix
* Avoid bogus warning about recursive dependencies
* c99 struct initialiser conversions

textbox.c:
* janitor: don't init statics to 0

util.c:
* fix lxdialog behaviour

//Peter
2004-07-15 06:01:05 +00:00
Eric Andersen
c7bda1ce65 Remove trailing whitespace. Update copyright to include 2004. 2004-03-15 08:29:22 +00:00
Eric Andersen
16f94a6722 Minor updates from linux 2.6.1 2004-01-16 12:49:06 +00:00
Glenn L McGrath
7c87b67c08 Patch from Bastian Blank, allow the buildtime to be overriden with a
different string, used by the debian busybox-cvs to specify the debian
date based version number.
2004-01-13 10:57:32 +00:00
Glenn L McGrath
8ac86e33a2 Patch by Rob Landley, fix warning 2003-10-03 08:28:59 +00:00
Eric Andersen
7001480a5e Seems I missed a spot 2003-08-05 05:59:48 +00:00
Eric Andersen
72d8e444f0 Merge/rework config system per the latest from linux-2.6.0-test2.
Fix the config bugs revealed by the updated config system.
 -Erik
2003-08-05 02:18:25 +00:00
Eric Andersen
a63d09a517 Patch from Pavel Roskin to fixup toplevel help text 2003-06-30 18:14:36 +00:00
Eric Andersen
fa7532b91a Fix the location for the default config so 'make defconfig'
actually works
2003-06-12 22:09:08 +00:00
Eric Andersen
a71c7047cf Avoid errors with buggy preprocessors 2003-03-31 16:27:18 +00:00
Eric Andersen
e68afefe56 Avoid potential rendering problems 2003-03-10 17:21:46 +00:00
Eric Andersen
ee9441f848 Patch from Brett Hunt at micron.com to fixup potential segfaults
during 'make menuconfig'
2003-01-23 06:36:15 +00:00
Eric Andersen
575c78274a Patch from Robert Schwebel -- support ncurses installed in /usr/local 2003-01-11 18:07:38 +00:00
Eric Andersen
068b6b07ff Don't build the ncurses stuff unless it is specifically asked for
-Erik
2002-12-13 22:53:28 +00:00
Eric Andersen
c9f20d9fb9 Yet another major rework of the BusyBox config system, using the considerably
modified Kbuild system I put into uClibc.  With this, there should be no more
need to modify Rules.mak since I've moved all the interesting options into the
config system.  I think I've got everything updated, but you never know, I may
have made some mistakes, so watch closely.
 -Erik
2002-12-05 08:41:41 +00:00