Commit Graph

348 Commits

Author SHA1 Message Date
"Vladimir N. Oleynik"
6f347ef9dc common BUFSIZ BSS buffer, small reduce code, data and bss 2005-10-15 10:23:55 +00:00
Bernhard Reutner-Fischer
554a9ff7ea - do not use bb_xgetularg10_bnd as a lower value of -1 doesn't work due to lowe
being unsigned.
- minor correction: use stdin only when no file was given via -i.
- use shorter boilerplate.
2005-10-10 13:34:19 +00:00
Paul Fox
61e45dbb2f catch and report errors from file_write() 2005-10-09 14:43:22 +00:00
Paul Fox
90372ed51a make Hit_Return() available when CONFIG_FEATURE_VI_COLON is off. it's
needed elsewhere as well now.
2005-10-09 14:26:26 +00:00
"Vladimir N. Oleynik"
ba248206fe change strange depend to libbb.h, but require busybox.h 2005-10-06 15:18:09 +00:00
Mike Frysinger
f87b3e30a7 as pointed out in Bug 17, use uint32_t instead of unsigned long since the code expects the size of the info variables to be 32bits and sizeof(long) on 64bit hosts is not 32bits 2005-09-27 04:16:22 +00:00
Mike Frysinger
de2b93859c eat misappropriated whitespace 2005-09-27 03:18:00 +00:00
Mike Frysinger
10a11e23ba uncuddle function scope brackets 2005-09-27 02:23:02 +00:00
Mike Frysinger
62f18e1f20 use the shorter license header 2005-09-24 07:16:29 +00:00
Mike Frysinger
0d4ee68be5 use brief license line 2005-09-24 06:01:57 +00:00
Paul Fox
c350485b18 initialize a couple of vars whose warnings were suppressed because
i was building w/ debug on before, which suppresses optimization.
2005-09-16 12:48:18 +00:00
Paul Fox
8552aec7fd some combinations of status line and screen refresh don't give a
correct screen, and bug 215 reports trouble with the status line
on small screens.

with this change a) the status line should always be refreshed
properly, b) the status line is a little shorter than it used to
be ("I" instead of "--INSERT--"), c) the status line will be
truncated if it doesn't fit on the screen, and d) if the screen
is too narrow for an error or transient status message (from
psb() or psbs()), then that message will be followed by a "Hit
Return" prompt.  (it wasn't until i did this last bit that the
size grew.  with this, these changes add about 150 bytes.)

- pgf
2005-09-16 12:20:05 +00:00
"Vladimir N. Oleynik"
23f62fc6f3 split libbb: moved xregcomp separatelly for speed up recompile 2005-09-14 16:59:11 +00:00
"Vladimir N. Oleynik"
b4f3cff6f5 removed strange extern void xregcomp(... from some applets, but declared from libbb.h 2005-09-14 16:22:50 +00:00
Paul Fox
f2de0b7ae4 allow either backspace or DEL, in addition to the user's erase
char, to be used in get_input_line()
2005-09-13 22:20:37 +00:00
Rob Landley
babd3fbba6 Missing break was screwing up 'y//' command. Bug #248. 2005-09-02 00:10:06 +00:00
Rob Landley
078bacf1e9 Patch -i support from Berhnard Fischer. 2005-09-01 03:02:23 +00:00
Mike Frysinger
4d00896d05 use toplevel ARFLAGS and update default ARFLAGS to be quiet 2005-07-27 01:09:24 +00:00
Paul Fox
18433aadf6 applying fix for:
0000118: vi join command does not mark file as modified for certain lines.
2005-07-20 17:39:52 +00:00
Paul Fox
d13b90b9e8 allow both ^H and DEL to backspace in insert mode (bug #23) 2005-07-18 22:17:25 +00:00
Eric Andersen
0ef24c672a Fix vi so that error messages, insert mode messages, etc are
all actually displayed in the status line as expected
2005-07-18 10:32:59 +00:00
Rob Landley
ed830e8693 Patch from Dmitry Zakharov:
Charlie Brady wrote:
> Here's another awk parsing problem - unary post increment - pre is fine:
>
>bash-2.05a$ echo 2,3 | gawk -F , '{ $2++ }'
>bash-2.05a$ echo 2,3 | /tmp/busybox/busybox awk -F , '{ $2++ }'
>awk: cmd. line:1: Unexpected token
>
Here's a fix for this. There is another problem with constructions like 
"print (A+B) ++C", I don't
know whether somebody uses such constructions (fixing both these 
problems would require very
serious change in awk code).
2005-06-07 02:43:52 +00:00
Rob Landley
93850a56b2 Patch from Colin Watson (mangled slightly by Rob Landley):
This patch implements the 'T' command in sed. This is a GNU extension,
but one of the udev hotplug scripts uses it, so I need it in busybox
anyway.

Includes a test; 'svn add testsuite/sed/sed-branch-conditional-inverted'
after applying.
2005-05-18 06:34:37 +00:00
Rob Landley
5797c7f0ef Doug Swarin pointed out a security bug in the -i option of sed.
While the permissions on the temp file are correct to prevent it from being 
maliciously mangled by passing strangers, (created with 600, opened O_EXCL, 
etc), the permissions on the _directory_ might not be, and we re-open the 
file to convert the filehandle to a FILE * (and automatically get an error 
message and exit if the directory's read-only or out of space or some such).

This opens a potential race condition if somebody's using dnotify on the 
directory, deletes/renames the tempfile, and drops a symlink or something 
there.  Somebody running sed -i as root in a world writeable directory could 
do damage.

I dug up notes on an earlier discussion where we looked at the security 
implications of this (unfortunately on the #uclibc channel rather than email; 
I don't have a transcript, just notes-to-self) which pointed out that if the 
permissions on the directory allow other people's files to be deleted/renamed 
then the original file is vulnerable to sabotage anyway.  However, there are 
two cases that discussion apparently didn't take into account:

1) Using another user's permissions to damage files in other directories you 
can't access (standard symlink attack).

2) Reading data another user couldn't otherwise access by having the new file 
belong to that other user.

This patch uses fdopen to convert the filehandle into a FILE *, rather than
reopening the file.
2005-05-18 05:56:16 +00:00
Eric Andersen
14f5c8d764 Patch from Bernhard Fischer to make a bunch of symbols static
which were otherwise cluttering the global namespace.
2005-04-16 19:39:00 +00:00
Mike Frysinger
4e5936ef95 In Bug 208, bernhardf writes:
On machines with only ANSI compliant compilers, not explitily delcaring
an empty parameter list 'void' causes failure.
2005-04-16 04:30:38 +00:00
Rob Landley
dcc286607c Hiroshi found another bug. Currently sed's $ triggers at end of every file,
and with multiple files SuSv3 says it should only trigger at the end of the
LAST file.

The trivial fix I tried first broke if the last file is empty.  Fixing this
properly required restructuring things to create a file list (actually a
FILE * list), and then processing it all in one go.  (There's probably a
smaller way to do this, merging with append_list perhaps.  But let's get
the behavior correct first.)

Note that editing files in place (-i) needs the _old_ behavior, with $
triggering at the end of each file.

Here's a test of all the things this patch fixed.  gnu and busybox seds produce
the same results with this patch, and different without it.

echo -n -e "1one\n1two\n1three" > ../test1
echo -n > ../test2
echo -e "3one\n3two\n3three" > ../test3
sed -n "$ p" ../test1 ../test2 ../test3
sed -n "$ p" ../test1 ../test2
sed -i -n "$ p" ../test1 ../test2 ../test3
2004-11-25 07:21:47 +00:00
Rob Landley
ce4f0e982b Hiroshi Ito found some bugs. The 'c' command (cut and paste) was hardwired
to not put a newline at the end (which was backwards, it should have been
hardwired _to_ put a newline at the end, whether or not the input line
ended with a newline).  Test case for that:

echo | sed -e '$ctest'

And then this would segfault:

echo | sed -e 'g'

Because pattern_space got freed but the dead pointer was only overwritten
in an if statement that didn't trigger if the hold space was empty.  Oops.

While debugging it, I found out that the hold space is persistent between
multiple input files, so I promoted it to a global and added it to the
memory cleanup.  The relevant test case (to compare with That Other Sed) is:

echo -n woo > woo
sed -e h -e g woo
echo "fish" | sed -e '/woo/h' -e "izap" -e 's/woo/thingy/' -e '/fish/g' woo -

And somebody gratuitously stuck in a c99 int8_t type for something that's just
a flag, so I grouped the darn ints.
2004-10-30 06:54:19 +00:00
Eric Andersen
7daa076d3e egor duda writes:
Hi!

I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.

That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.

I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.

'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.

One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.

egor
2004-10-08 07:46:08 +00:00
Glenn L McGrath
ca29ffc206 Patch from Dmitry Zakharov to fix a bug triggered by freeswan's scripts. 2004-09-24 09:24:27 +00:00
Eric Andersen
a9eb33ddc7 regularly update the status line display
-Erik
2004-08-19 19:15:06 +00:00
Eric Andersen
67776bef59 Simon Poole reports that awk segfaults when environment variables
with no value exist, i.e.

	$ export BOB=''
	% ./busybox awk
	Segmentation fault

This patch teaches awk to not blow chunks on empty env variables.
 -Erik
2004-07-30 23:52:08 +00:00
Glenn L McGrath
1fbc909570 Patch from Dmitry Zakharov to fix a bug discovered via the freeswap
script.
2004-07-23 02:11:25 +00:00
Eric Andersen
165e8cbf34 Assign 'forced' before the goto to avoid a warning 2004-07-20 06:44:46 +00:00
Eric Andersen
9855548a77 Rob Landley writes:
add sed -r support.

I bumped into a couple of things that want to use extended regular expressions
in sed, and it really isn't that hard to add.  Can't say I've extensively
tested it, but it's small and isn't going to break anything that doesn't use
it, so...

Rob
2004-05-26 10:03:33 +00:00
Glenn L McGrath
21d7d61de1 Use int instead of char for return type, in theory avoiding a cast 2004-05-16 02:35:49 +00:00
Glenn L McGrath
5d2edbf16d Fix for debian bug #248106, should use int for returned getopt value. 2004-05-10 08:59:17 +00:00
Glenn L McGrath
c6992feee3 Update my email address, document some of my tasks in the AUTHORS file 2004-04-25 05:11:19 +00:00
Eric Andersen
b94669543d This sed patch can only be described as "duh". Stat the source file, chmod
the _destination_ file.  (Ah hah!  That works _much_ better...)  I
implemented the behavior, I just forgot to test this corner of it.  My fault,
sorry...

No, gnu sed -i doesn't preverve ownership information.  I checked.
Permissions, yes, ownership info, no.

Rob
2004-04-21 00:57:14 +00:00
Eric Andersen
faa7d863fc So I'm building a linux from scratch system, using a working script to do this
that the _only_ change to is that gnu sed has been replaced with busybox sed.
And ncurses' install phase hangs.  I trace it down, and it's trying to run
gawk.  (Insert obligatory doubletake, but this is FSF code we're talking
about, so...)

It turns out gawk shells out to sed, ala "sed -f /tmp/blah file.h".  The
/tmp/blah file is basically empty (it contains one character, a newline).  So
basically, gawk is using sed as "cat".  With gnu sed, it works like cat,
anyway.

With busybox sed, it tests if its command list is empty after parsing the
command line, and if the list is empty it takes the first file argument as a
sed command string, and if that leaves the file list empty it tries to read
the data to operate on from stdin.  (Hence the hang, since nothing's coming
in on stdin...)

It _should_ be testing whether there were any instances of -f or -e, not
whether it actually got any commands.  Using sed as cat may be kind of
stupid, but it's valid and gawk relies on this behavior.

Here's a patch to fix it, turning a couple of ints into chars in hopes of
saving a bit of the space this adds.  Comments?

Rob
2004-04-21 00:56:22 +00:00
Eric Andersen
aff114c33d Larry Doolittle writes:
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.

Erik - please apply.

Authors - please check that I didn't corrupt any meaning.

Package importers - see if any of these changes should be
passed to the upstream authors.

I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.

What is "pretect redefined for test" in cmdedit.c?

Good luck on the 1.00 release!

      - Larry
2004-04-14 17:51:38 +00:00
Rob Landley
25d82397f7 The last patch broke:
sed -i "/^boo/a fred" ipsec.conf

Which works in gnu sed.  (And is _supposed_ to strip all the whitespace before
"fred".)

It also broke:
sed -i -e "/^boo/a \\" -e "   fred" ipsec.conf

I.E. there can legally be spaces between the a and the backslash at the end of
the line.

And strangely enough, gnu sed accepts the following syntax as well:
sed -i "/^boo/a \\  fred" ipsec.conf

Which is a way of having the significant whitespace at the start of the line,
all on one line.  (But notice that the whitespace BEFORE the slash is still
stripped, as is the slash itself.  And notice that the naieve placement of
"\n" there doesn't work, it puts an n at the start of the appended line.  The
double slashing is for shell escapes because you could escape the quote, you
see.  It's turned into a single backslash.  But \n there is _not_ turned into
a newline by the shell.  So there.)

This makes all three syntaxes work in my tests.  I should probably start
writing better documentation at some point.  I posted my current sedtests.py
file to the list, which needs a lot more tests added as well...
2004-04-01 09:23:30 +00:00
Eric Andersen
46390ed829 Junio Hamano, junio at twinsun dot com writes:
The sed command in busybox 1.0.0-pre8 loses leading whitespace
in 'a' command ('i' and 'c' commands are also affected).  A
patch to fix this is attached at the end of this message.

The following is a transcript that reproduces the problem.  The
first run uses busybox 1.0.0-pre3 as "/bin/sed" command, which
gets the expected result.  Later in the test, /bin/sed symlink
is changed to point at busybox 1.0.0-pre8 and the test script is
run again, which shows the failure.

=== reproduction recipe ===
* Part 1.  Use busybox 1.0.0-pre3 as sed; this works.

root# cd /tmp
root# cat 1.sh
#!/bin/sh

cd /tmp
rm -f ipsec.conf ipsec.conf+
cat >ipsec.conf <<\EOF
version 2.0

config setup
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
EOF
sed -e '/^config setup/a\
	nat_traversal=yes' ipsec.conf >ipsec.conf+
mv -f ipsec.conf+ ipsec.conf
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
        nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0

config setup
        nat_traversal=yes
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
root# sed --version
sed: invalid option -- -
BusyBox v1.00-pre3 (2004.02.26-18:47+0000) multi-call binary

Usage: sed [-nef] pattern [files...]

* Part 2.  Continuing from the above, use busybox 1.0.0-pre8
  as sed; this fails.

root# ln -s busybox-pre8 /bin/sed-8
root# mv /bin/sed-8 /bin/sed
root# sed --version
This is not GNU sed version 4.0
root# sed --
BusyBox v1.00-pre8 (2004.03.30-02:44+0000) multi-call binary

Usage: sed [-nef] pattern [files...]
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
        nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0

config setup
nat_traversal=yes
        klipsdebug=none
        plutodebug=none
        plutostderrlog=/dev/null

conn %default
        keyingtries=1
        ...
root#
=== reproduction recipe ends here ===

This problem was introduced in 1.0.0-pre4.  The problem is that
the command argument parsing code strips leading whitespaces too
aggressively.  When running the above example, the piece of code
in question gets "\n\tnat_traversal=yes" as its argument in
cmdstr variable (shown part in the following patch).  What it
needs to do at this point is to strip the first newline and
nothing else, but it instead strips all the leading whitespaces
at the beginning of the string, thus losing the tab character.
The following patch fixes this.
2004-03-31 11:42:40 +00:00
Eric Andersen
90fb65f7a6 Patch from Thomas Winkler -- vi -R did not work 2004-03-31 11:12:51 +00:00
Eric Andersen
c7bda1ce65 Remove trailing whitespace. Update copyright to include 2004. 2004-03-15 08:29:22 +00:00
Glenn L McGrath
4bded58207 Patch from Dmitry Zakharov, this line was missedfrom the last patch 2004-02-22 11:55:09 +00:00
Rob Landley
53302f80da Add -i option to sed, to edit files in-place. 2004-02-18 09:54:15 +00:00
Eric Andersen
5cc90eade5 Richard Kojedzinszky writes:
Hi All,

I aplogoize for the mistake, but i have just recognized that somehow the
last patch I sent in was wrong, and a '0' was instead of a '-1'. Because
of this, vi does behave the wrong way. So again, it should be the last
patch for vi. This is for pre7.
2004-02-06 10:36:08 +00:00
Eric Andersen
aeea32ca69 Richard Kojedzinszky writes:
Hi,

I've noticed the bug also, and here is another patch for it. I hope it'll
not introduce more bugs. Not too nice, but works for me.

Here it is for busybox-1.00-pre6
2004-02-04 11:19:44 +00:00
Eric Andersen
c06f568dda Rob Landley writes:
While building glibc with busybox as part of the development environment, I
found a bug in glibc's regexec can throw sed into an endless loop.  This
fixes it.  Should I put an #ifdef around it or something?  (Note, this patch
also contains the "this is not gnu sed 4.0" hack I posted earlier, which is
also needed to build glibc...)
2004-02-04 10:57:46 +00:00
Glenn L McGrath
ee829065cb Patch by Richard Kojedzinszky, when using END at end of lines it was
skipping to next line, cw command was leaving one char in buffer
2004-01-21 10:59:45 +00:00
Rob Landley
40ec4aeb8e Thinko in s//options. (Whitespace skipping in the wrong place.) 2004-01-04 06:42:14 +00:00
Eric Andersen
d10f36fe2e Match changes made to cmdedit 2003-12-23 20:45:14 +00:00
Eric Andersen
52a3c2726e Patch from Matt Kraai:
sed is broken:

 busybox sed -n '/^a/,/^a/p' >output <<EOF
 a
 b
 a
 b
 EOF
 cmp -s output - <<EOF
 a
 b
 a
 EOF

The attached patch fixes it.
2003-12-23 08:53:51 +00:00
Glenn L McGrath
00ed36fd52 Patch from Dmitry Zakharov,
Fixes two bugs:
- END block didn't execute after an exit() call
- huge memory consumption and performance degradation on large input
(now performance is comparable to gawk)
2003-10-30 13:36:39 +00:00
Eric Andersen
88c916bdec Andreas Mohr writes:
the busybox menuconfig triggered my "inacceptable number of spelling mistakes"
upper level, so I decided to make a patch ;-)

I also improved some wording to describe some things in a better way.

Many thanks for an incredible piece of software!

Andreas Mohr, random OSS developer
2003-10-22 09:58:56 +00:00
Eric Andersen
638da75f4b Fix some warnings that have crept in recently 2003-10-09 08:18:36 +00:00
Glenn L McGrath
586d86cc8c Comaptability with gcc-2.95 2003-10-09 07:22:59 +00:00
Glenn L McGrath
42c25735e6 Patch from Rob Landley;
Moving on to building diffutils, busybox sed needs this patch to get
past the first problem.  (Passing it a multi-line command line argument
with -e works, but if you don't use -e it doesn't break up the multiple
lines...)
2003-10-04 05:27:56 +00:00
Glenn L McGrath
0ad4daa54e Patch from Rob Landley to fix backrefs 2003-10-01 10:26:23 +00:00
Glenn L McGrath
738fb33994 Patch by Rob Landley, fix "newline after edit command" 2003-10-01 06:45:11 +00:00
Glenn L McGrath
aa5a602689 Patch by Rob Landley, work in progress update, fixes lots of bugs,
introduces a few others (but they are being worked on)
2003-10-01 03:06:16 +00:00
Glenn L McGrath
761ec20f81 Fix some typo's, remove some extra free statements 2003-09-24 10:23:39 +00:00
Glenn L McGrath
2570b43e82 Configuration option to define wether to follows GNU sed's behaviour
or the posix standard.
Put the cleanup code back the way it was.
2003-09-16 05:25:43 +00:00
Glenn L McGrath
204ff1cea4 Fix a bug that creapt in recently with substitution subprinting, and add
a test for it.
2003-09-16 01:46:36 +00:00
Glenn L McGrath
977451ef44 Fix a simple mistake with pattern space, and add a test for it 2003-09-15 12:07:48 +00:00
Glenn L McGrath
e3e28d3bb6 Fix some memory allocation problems
----------------------------------------------------------------------
2003-09-15 09:22:04 +00:00
Eric Andersen
8efe967018 Be entirely consistant when using ioctl(0, TIOCGWINSZ, &winsize)
to ensure proper fallback behavior on, i.e. serial consoles.
 -Erik
2003-09-15 08:33:45 +00:00
Glenn L McGrath
2eed0e2d47 Add a test for the 'P' command and fix current implementation so it
doesnt permanently modify the pattern space.
2003-09-15 06:28:45 +00:00
Glenn L McGrath
6e5687abc3 A test and fix for the sed 'n' command 2003-09-15 06:12:53 +00:00
Glenn L McGrath
73116311e5 Fix for the sed-append-next-line test 2003-09-15 05:42:05 +00:00
Glenn L McGrath
640c1f547f Fix recursion problem 2003-09-15 04:55:29 +00:00
Glenn L McGrath
294d113adb Memory cleanups and fix for echo "foo" | sed 's/foo/bar/;H;q' 2003-09-14 16:28:08 +00:00
Glenn L McGrath
8417c8c38b Cleanup memory usage 2003-09-14 15:24:18 +00:00
Glenn L McGrath
edc388cf4e The previous fix for 's/a/1/;s/b/2/;t one;p;:one;p' broke the case of
echo fooba | ./busybox sed -n 's/foo//;s/bar/found/p'

I really need to start adding these tests to the testsuite.

keep the substituted and altered flags seperate
2003-09-14 08:52:53 +00:00
Glenn L McGrath
3fe475677a Preserve substitution flag value within the current line.
Fixed the following testcase
# cat strings |./busybox sed -n -f test3.sed
1
1
2
c
c
# cat strings
a
b
c
2003-09-14 07:59:28 +00:00
Glenn L McGrath
f4523562b6 Fix branching commands.
If a label isnt specified, jump to end of script, not the last command
in the script.

Print an error and exit if you try and jump to a non-existant label

Works for the following testcase
# cat strings
a
b
c
d
e
f
g
# cat strings | ./busybox sed -n '/d/b;p'
a
b
c
e
f
g
2003-09-14 06:01:14 +00:00
Glenn L McGrath
8aac05bfe5 Patch from Rob Landley
Fixed a memory leak in add_cmd/add_cmd_str by moving the allocation
of sed_cmd down to where it's actually first needed.
                                                                                
In get_address, if index_of_next_unescaped_regexp_delim ever failed, we
wouldn't notice because the return value was added to idx, which was 
already guaranteed to be > 0.  (This is buried in the changes made when 
I redid get_address to be based on pointer arithmetic, because all the tests 
were gratuitously dereferencing with a constant zero, which wasn't obvious.)
         
Comment in parse_regex_delim was wrong: 's' and 'y' both call it.
 
The reason "sed_cmd->num_backrefs = 0;" isn't needed is that sed_cmd was
allocated with cmalloc, which zeroes memory.

Different handling of space after \ in i...

Different handling of pattern "s/a/b s/c/d"

Cool, resursive reads don't cause a crash. :)

Fixed "sed -f blah filename - < filename" since GNU sed was handling 
both - and filenames on the same line.  (You can even list - more than 
once, although it's immediate EOF...)
2003-09-14 04:06:12 +00:00
Glenn L McGrath
7c59a83a77 Stupid typo 2003-09-14 02:37:46 +00:00
Glenn L McGrath
4dc1d25a30 Fix some memory allocation problems 2003-09-14 01:25:31 +00:00
Glenn L McGrath
f36635cec6 Fix the following testcase by disabling global substitution if the regex
is anchored to the start of line, there can be only one subst.
echo "aah" | sed 's/^a/b/g'
2003-09-13 15:12:22 +00:00
Glenn L McGrath
c18ce373a2 Fix the following testcase by storing the state of the adress match with
the command.
# cat strings
a
b
c
d
e
f
g
# ./busybox sed '1,2d;4,$d' <strings
c
# ./busybox sed '4,$d;1,2d' <strings
# sed '4,$d;1,2d' <strings
c
# sed '1,2d;4,$d' <strings
c
2003-09-13 06:57:39 +00:00
Glenn L McGrath
9b04f1841e Fix the substitution print subcommand, it should only print if its
own substitution matched, not previous ones.
e.g
echo fooba | sed -n 's/foo//;s/bar/found/p'
shouldnt print anything
2003-08-30 04:35:07 +00:00
Eric Andersen
9c3c38da55 Patch from Terje Kvernes adding quite a lot of missing documentation 2003-07-22 09:59:34 +00:00
Eric Andersen
cb81e6484d Update a bunch of docs. Run a script to update my email addr. 2003-07-14 21:21:08 +00:00
Eric Andersen
e5642119ee Patch from Thomas Cameron:
Hello all,
	    This patch adds more "Help" text to the config system.  Almost
    all applets now have a help entry.  Also, I cleaned up the spacing of
    the existing text so that things are consistent.  This patch is against
    this morning's CVS.

    Thomas Cameron
    CEI Systems, Inc.
2003-07-14 19:37:08 +00:00
Eric Andersen
65e20a33c2 Patch from Kent Robotti adding a bunch of needed docs!
-Erik
2003-07-05 07:52:35 +00:00
Glenn L McGrath
655d814d75 New applet: patch, applies a unified diff 2003-06-22 15:32:41 +00:00
Glenn L McGrath
91e1978ff0 New commands, 'G' and 'H' 2003-04-26 07:40:07 +00:00
Glenn L McGrath
fc4cb4dbb5 Fix logic error in grouped commands 2003-04-12 16:10:42 +00:00
Glenn L McGrath
d4185b0e15 Fix up indenting 2003-04-11 17:10:23 +00:00
Glenn L McGrath
d7fe39b587 Really fix the 'r' command 2003-04-09 15:52:32 +00:00
Glenn L McGrath
d87a7ac269 Fix the sed 'r' command 2003-04-09 15:26:14 +00:00
Glenn L McGrath
2410386611 fix substitution when replacing with &, we shouldnt check for an escape charcter. Its already been taken care of _somewhere_ else 2003-04-09 07:51:43 +00:00
Glenn L McGrath
bd9b32bc0d Label ends at a newline, update comments, rename linked list field 2003-04-09 01:43:54 +00:00
Glenn L McGrath
8d6395d41a Run through indent 2003-04-08 11:56:11 +00:00
Glenn L McGrath
c1d95076f0 Fixes block commands to correctly identify end of block, recognise the #n directive, fix substitue command when regex isnt specified 2003-04-08 06:42:45 +00:00
Glenn L McGrath
7ce9e247f0 Add hold space commands 'g', 'h', 'x' 2003-04-07 16:04:14 +00:00
Glenn L McGrath
c6adada158 Rename "line" to pattern_space to be more descriptive and closer to the POSIX description 2003-04-07 12:24:44 +00:00
Glenn L McGrath
9a52bb6878 Group common string 2003-03-30 09:38:40 +00:00
Glenn L McGrath
30b47df86b Small fix for sed 'y' command 2003-03-30 08:40:09 +00:00
Glenn L McGrath
f01b46d7dd sed 'y' command, simplify some other code 2003-03-30 08:02:18 +00:00
Glenn L McGrath
0c51832b60 Experimental support for embeded newline. (im evil)
Fix segfault when using 'N' with an odd number of lines.
2003-03-30 03:41:53 +00:00
Glenn L McGrath
a0f0f0cf76 Still fine tunning the printing of the substitute command 2003-03-28 14:11:34 +00:00
Glenn L McGrath
595a6a4199 sed 't' branching command 2003-03-28 08:36:52 +00:00
Glenn L McGrath
ccd43a8301 Fix sed 's' command's 'p' flag, so it can print line twice 2003-03-28 07:44:03 +00:00
Glenn L McGrath
b08e3e8c2e fix q command 2003-03-28 04:57:52 +00:00
Glenn L McGrath
961c6c19da Add basic branching support, sed ':' and 'b' commands 2003-03-28 04:43:39 +00:00
Glenn L McGrath
56c633c139 make sed cleanup use linked list 2003-03-28 04:23:23 +00:00
Glenn L McGrath
c949bfa555 Use a linked list for sed commands in preparation for branching support 2003-03-28 03:53:31 +00:00
Manuel Novoa III
cad5364599 Major coreutils update. 2003-03-19 09:13:01 +00:00
Glenn L McGrath
e01f9662a5 Match newlines, this fixes matching of ^ or $ when there is a '\n' in the pattern being matched. This fixes cases when the N command is used. 2003-03-18 08:37:57 +00:00
Glenn L McGrath
2971ef1730 Fix a bug that corrupted the string followed commands that had no arguments (Closes #1304) 2003-03-18 01:19:23 +00:00
Glenn L McGrath
4157a8a71e fix n, add N, P 2003-03-10 04:12:35 +00:00
Glenn L McGrath
ff724fb076 add the 'n' command 2003-03-10 02:56:56 +00:00
Glenn L McGrath
bed4033e96 Add the q (quit) option 2003-03-10 02:21:14 +00:00
Glenn L McGrath
f3bd7c4631 Fix a delimiter matching bug i introduced. 2003-03-09 15:40:40 +00:00
Glenn L McGrath
f50ce3135f Support grouped commands, i.e. {cmd1;cmd2} 2003-03-09 15:12:24 +00:00
Glenn L McGrath
4c6523a90b alloc array for commands, use string ptr in parse_command_string() 2003-03-09 11:06:38 +00:00
Glenn L McGrath
e7a8bc949b use typedef for struct sed_cmd 2003-03-09 10:23:57 +00:00
Glenn L McGrath
1fb446795d redo get_addres(). save some space. possible fix a bug where the command might be set to 0 if no second address is given. dont parse sed_cmd struct to get_address, we only need the delim field. 2003-03-09 08:44:49 +00:00
Glenn L McGrath
2f8a401772 Woops, remove the code i didnt mean to commit 2003-03-09 02:44:49 +00:00
Glenn L McGrath
d5eadea970 Mention the opengroup sed reference, add a check which is disabled at present. 2003-03-09 02:39:29 +00:00
Glenn L McGrath
505bd0f15a Fix matching for the $ address (last line) 2003-03-08 05:21:02 +00:00
Glenn L McGrath
0a65e190f4 Support the '=' command 2002-12-23 10:16:12 +00:00
Eric Andersen
c9f20d9fb9 Yet another major rework of the BusyBox config system, using the considerably
modified Kbuild system I put into uClibc.  With this, there should be no more
need to modify Rules.mak since I've moved all the interesting options into the
config system.  I think I've got everything updated, but you never know, I may
have made some mistakes, so watch closely.
 -Erik
2002-12-05 08:41:41 +00:00
Glenn L McGrath
7127b58baa Fix crashme code, by Jim Treadway 2002-12-03 21:48:15 +00:00
Glenn L McGrath
09adaca37d last_patch_69, 8 bit clean and other fixes from Vladimir N. Oleynik 2002-12-02 21:18:10 +00:00
Aaron Lehmann
a170e1c858 Change if(x)free(x); to free(x); 2002-11-28 11:27:31 +00:00
Glenn L McGrath
d4036f86e5 Use erorr_msg( isntead of fprintf(stderr, 2002-11-28 09:30:40 +00:00
Glenn L McGrath
545106f8db Move awk from textutils to editors. Cleanup run-parts, saves 200 bytes, moves the guts of run_parts to libbb to be used by ifupdown. 2002-11-11 06:21:00 +00:00
Eric Andersen
fda2b7ff47 A patch from Jouni Malinen to avoid some buffer overflows in vi,
closing bug #1270
2002-10-26 10:19:19 +00:00
Aaron Lehmann
6fdacc74f0 vi inlining 2002-08-21 13:02:24 +00:00
Robert Griebl
00f5ecb141 Somehow I applied an old patch for the last commit - this one works now:
- Added \CregexC support to sed (sed testsuite reported no errors, btw)
2002-08-06 23:13:31 +00:00
Robert Griebl
7940147e25 Added the \CregexpC syntax as an alternative for /regexp/ (like GNU sed) 2002-08-06 21:07:17 +00:00
Robert Griebl
a71389bfe8 Applied a patch from Philip Blundell <pb@nexus.co.uk>:
Added support for ":x" as an alias for ":wq" to vi
2002-07-31 21:22:21 +00:00
Eric Andersen
2276d83639 Fixup warnings and undefined operations that show up in gcc-3.1
-Erik
2002-07-11 11:11:56 +00:00
Robert Griebl
47abc49c4a Patch from Simon Krahnke:
I wrote a patch for busybox for our company's (www.lisa.de)
private use. [...] To sed it adds the '!'-inversion of addresses.
2002-06-11 23:43:27 +00:00
Tim Riker
86c76a9c2a fix from kergoth 2002-04-26 07:41:22 +00:00
Eric Andersen
85208e2ab9 Completely rework the config system so that it no longer annoys me to work on
the busybox development tree.  This eliminates the use of recursive make, and
once again allows us to run 'make' in a subdirectory with the expected result.
And things are now much faster too.  Greatly improved IMHO...
 -Erik
2002-04-12 12:05:57 +00:00
Matt Kraai
5c69cd84ff * editors/sed.c (process_file): Stop processing deleted lines.
* testsuite/sed/sed-does-not-substitute-in-delete-line: New.
2002-04-01 16:17:37 +00:00
Matt Kraai
9eaf059d28 * editors/sed.c (parse_cmd_str): Remove redundant code to skip initial
whitespace.
2002-01-03 21:19:19 +00:00
Matt Kraai
5ed78adca5 * editors/sed.c (parse_edit_cmd): Rewrite.
* testsuite/sed/sed-splits-edit-commands-on-command-line: New.
2002-01-03 21:12:34 +00:00
Matt Kraai
d21735de2d * editors/sed.c (parse_edit_command): Require a newline after the backslash
after an edit command.
* testsuite/sed/sed-requires-newline-after-edit-command: New.
2002-01-02 17:56:38 +00:00
Matt Kraai
70624846fd Ignore blanks before the first address and before the command. 2001-12-21 16:04:12 +00:00
Matt Kraai
1f0c43668a Remove == TRUE' tests and convert != TRUE' and `== FALSE' tests to use !. 2001-12-20 23:13:26 +00:00
Matt Kraai
0c390a76fe Eliminate warning. 2001-11-20 16:00:19 +00:00
Eric Andersen
9c6b5fcb0a Minor warning cleanups 2001-11-17 07:23:46 +00:00
Eric Andersen
bff7a60f63 Patch from "Andrew Tipton" <andrew@cadre5.com> to enable vi cursor
keys while editing.
2001-11-17 07:15:43 +00:00
Eric Andersen
80f5ac7016 Patch from Steve Merrifield <steve@labyrinth.net.au> to make vi
use xmalloc
2001-11-17 06:57:42 +00:00