* on step, poll interval drops to 8.5 mins instead of 32 seconds
* on total loss of all replies (no replies from any peer
for last 8 requests), also drop poll interval to 8.5 mins
instead of 32 seconds
* on send abd recv errors, RETRY_INTERVAL is now 32 seconds,
not 5 seconds
* on timing out listening to reply, instead of unconditional
shortening poll interval by x4, clamp it to NOREPLY_INTERVAL
(512 seconds)
* if a largish offset is seen, clamp nexp poll interval
to 128 seconds, not 64 seconds
function old new delta
clamp_pollexp_and_set_MAXSTRAT - 37 +37
recv_and_process_peer_pkt 861 869 +8
poll_interval 52 48 -4
update_local_clock 762 752 -10
ntpd_main 1063 1050 -13
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The burst mode needs to be stopped even when no replies are received.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some HP PA-RISC firmware always sends fixed 512-byte requests,
with trailing garbage.
function old new delta
tftpd_main 578 572 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
During link-local IP resolution, if a regular ARP request is received
during the ARP probe period, it will incorrectly cause a target IP
conflict. This then leads to a new IP being picked unnecessarily.
Per RFC 3927, section 2.2.1, we should flag a target IP conflict only if
the source IP is null, the target IP matches our IP, and the source
hw addr does not match our hw addr.
function old new delta
zcip_main 1354 1322 -32
Signed-off-by: Ken Sharp <ken.sharp@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Like d3092c99, this change adds support for the DHCP "path-prefix"
option, as defined in RFC 5071. We use the string identifer
"pxepathprefix".
Adding this option makes string parsing in the hook scripts simpler.
function old new delta
dhcp_option_strings 255 269 +14
dhcp_optflags 72 74 +2
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When we merely chdir to saved "real" root fd,
exec("proc/self/exe") works for static executables but not
for dynamic ones (they can't find their interpreter).
With this patch, we also *chroot* to real root.
As a bonus, this gives us proper usernames, timezone conversion
etc.
function old new delta
popen_ls 203 259 +56
ftpd_main 2362 2366 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before this cahnge, sometimes they were used after the next packet
from another peer was received, because we did updare some peer stats
from high delay packet before dropping it.
function old new delta
recv_and_process_peer_pkt 922 966 +44
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
rand() is the most standard C library function,
and on uclibc they are the same. I guess
they are the same in most todays' libc...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Does not configure anything. L2 configuration hook scripts should do
their job on receiving ADDRFAM=link. Configuration will be done only
once, irrespective of L3 protocols used.
Using the 'link' family in the interfaces file conforms to the Debian
implementation:
http://sources.debian.net/src/ifupdown/0.7.47.1/link.defn
function old new delta
link_methods - 12 +12
addr_link - 12 +12
link_up_down - 6 +6
static.addr_fams 12 16 +4
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 1/0 up/down: 34/0) Total: 34 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
GCC complained about since_last_update being set but not used.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
There's no reason to call gethostbyname() on the value returned
by uname() when asked just for a short name of a host. This may
also be wrong, when uname is set to one value, but in /etc/hosts
(or elsewhere) the "canonical" name is different. This is often
the case for localhost entry in /etc/hosts:
127.0.0.1 localhost myname
With this content of /etc/hosts, and uname being set to myname,
busybox hostname -s will return localhost, while regular
hostname utility returns myname.
Fix this by not calling gethostbyname() for the simple
'hostname -s' use.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
GNU wget: wget google.com // ok
bb before: wget google.com // wget: not an http or ftp url
function old new delta
parse_url 317 339 +22
Signed-off-by: Lauri Kasanen <curaga@operamail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>