hush/util-linux/mkswap.c
2006-07-01 14:34:33 +00:00

398 lines
10 KiB
C

/* vi: set sw=4 ts=4: */
/*
* mkswap.c - set up a linux swap device
*
* (C) 1991 Linus Torvalds. This file may be redistributed as per
* the Linux copyright.
*/
/*
* 20.12.91 - time began. Got VM working yesterday by doing this by hand.
*
* Usage: mkswap [-c] [-vN] [-f] device [size-in-blocks]
*
* -c for readability checking. (Use it unless you are SURE!)
* -vN for swap areas version N. (Only N=0,1 known today.)
* -f for forcing swap creation even if it would smash partition table.
*
* The device may be a block device or an image of one, but this isn't
* enforced (but it's not much fun on a character device :-).
*
* Patches from jaggy@purplet.demon.co.uk (Mike Jagdis) to make the
* size-in-blocks parameter optional added Wed Feb 8 10:33:43 1995.
*
* Version 1 swap area code (for kernel 2.1.117), aeb, 981010.
*
* Sparc fixes, jj@ultra.linux.cz (Jakub Jelinek), 981201 - mangled by aeb.
* V1_MAX_PAGES fixes, jj, 990325.
*
* 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org>
* - added Native Language Support
*
* from util-linux -- adapted for busybox by
* Erik Andersen <andersen@codepoet.org>. I ripped out Native Language
* Support, made some stuff smaller, and fitted for life in busybox.
*
*/
#include "busybox.h"
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <sys/ioctl.h> /* for _IO */
#include <sys/utsname.h>
#include <asm/page.h> /* for PAGE_SIZE and PAGE_SHIFT */
/* we also get PAGE_SIZE via getpagesize() */
static char *device_name = NULL;
static int DEV = -1;
static long PAGES = 0;
static int check = 0;
static int badpages = 0;
#if ENABLE_FEATURE_MKSWAP_V0
static int version = -1;
#else
#define version 1
/* and make sure that we optimize away anything which would deal with checking
* the kernel revision as we have v1 support only anyway.
*/
#undef KERNEL_VERSION
#define KERNEL_VERSION(p,q,r) 1
#define get_linux_version_code() 1
#endif
/*
* The definition of the union swap_header uses the constant PAGE_SIZE.
* Unfortunately, on some architectures this depends on the hardware model,
* and can only be found at run time -- we use getpagesize().
*/
static int pagesize;
static unsigned int *signature_page;
static struct swap_header_v1 {
char bootbits[1024]; /* Space for disklabel etc. */
unsigned int swap_version;
unsigned int last_page;
unsigned int nr_badpages;
unsigned int padding[125];
unsigned int badpages[1];
} *p;
static inline void init_signature_page(void)
{
pagesize = getpagesize();
#ifdef PAGE_SIZE
if (pagesize != PAGE_SIZE)
bb_error_msg("Assuming pages of size %d", pagesize);
#endif
signature_page = (unsigned int *) xmalloc(pagesize);
memset(signature_page, 0, pagesize);
p = (struct swap_header_v1 *) signature_page;
}
static inline void write_signature(char *sig)
{
char *sp = (char *) signature_page;
strncpy(sp + pagesize - 10, sig, 10);
}
#define V0_MAX_PAGES (8 * (pagesize - 10))
/* Before 2.2.0pre9 */
#define V1_OLD_MAX_PAGES ((0x7fffffff / pagesize) - 1)
/* Since 2.2.0pre9:
error if nr of pages >= SWP_OFFSET(SWP_ENTRY(0,~0UL))
with variations on
#define SWP_ENTRY(type,offset) (((type) << 1) | ((offset) << 8))
#define SWP_OFFSET(entry) ((entry) >> 8)
on the various architectures. Below the result - yuk.
Machine pagesize SWP_ENTRY SWP_OFFSET bound+1 oldbound+2
i386 2^12 o<<8 e>>8 1<<24 1<<19
mips 2^12 o<<15 e>>15 1<<17 1<<19
alpha 2^13 o<<40 e>>40 1<<24 1<<18
m68k 2^12 o<<12 e>>12 1<<20 1<<19
sparc 2^{12,13} (o&0x3ffff)<<9 (e>>9)&0x3ffff 1<<18 1<<{19,18}
sparc64 2^13 o<<13 e>>13 1<<51 1<<18
ppc 2^12 o<<8 e>>8 1<<24 1<<19
armo 2^{13,14,15} o<<8 e>>8 1<<24 1<<{18,17,16}
armv 2^12 o<<9 e>>9 1<<23 1<<19
assuming that longs have 64 bits on alpha and sparc64 and 32 bits elsewhere.
The bad part is that we need to know this since the kernel will
refuse a swap space if it is too large.
*/
/* patch from jj - why does this differ from the above? */
#if defined(__alpha__)
#define V1_MAX_PAGES ((1 << 24) - 1)
#elif defined(__mips__)
#define V1_MAX_PAGES ((1 << 17) - 1)
#elif defined(__sparc_v9__)
#define V1_MAX_PAGES ((3 << 29) - 1)
#elif defined(__sparc__)
#define V1_MAX_PAGES (pagesize == 8192 ? ((3 << 29) - 1) : ((1 << 18) - 1))
#else
#define V1_MAX_PAGES V1_OLD_MAX_PAGES
#endif
/* man page now says:
The maximum useful size of a swap area now depends on the architecture.
It is roughly 2GB on i386, PPC, m68k, ARM, 1GB on sparc, 512MB on mips,
128GB on alpha and 3TB on sparc64.
*/
#define MAX_BADPAGES ((pagesize-1024-128*sizeof(int)-10)/sizeof(int))
static inline void bit_set(unsigned int *addr, unsigned int nr)
{
unsigned int r, m;
addr += nr / (8 * sizeof(int));
r = *addr;
m = 1 << (nr & (8 * sizeof(int) - 1));
*addr = r | m;
}
static int bit_test_and_clear(unsigned int *addr, unsigned int nr)
{
unsigned int r, m;
addr += nr / (8 * sizeof(int));
r = *addr;
m = 1 << (nr & (8 * sizeof(int) - 1));
*addr = r & ~m;
return (r & m) != 0;
}
static void page_ok(int page)
{
if (ENABLE_FEATURE_MKSWAP_V0) {
bit_set(signature_page, page);
}
}
static void check_blocks(void)
{
unsigned int current_page;
int do_seek = 1;
char *buffer;
buffer = xmalloc(pagesize);
current_page = 0;
while (current_page < PAGES) {
if (!check && version == 0) {
page_ok(current_page++);
continue;
}
if (do_seek && lseek(DEV, current_page * pagesize, SEEK_SET) !=
current_page * pagesize)
bb_error_msg_and_die("seek failed in check_blocks");
if ((do_seek = (pagesize != read(DEV, buffer, pagesize)))) {
current_page++;
if (version == 0)
bit_test_and_clear(signature_page, current_page);
else {
if (badpages == MAX_BADPAGES)
bb_error_msg_and_die("too many bad pages");
p->badpages[badpages] = current_page;
}
badpages++;
continue;
}
page_ok(current_page++);
}
if (ENABLE_FEATURE_CLEAN_UP)
free(buffer);
if (badpages > 0)
printf("%d bad page%s\n", badpages, (badpages==1)?"":"s");
}
static long valid_offset(int fd, int offset)
{
char ch;
if (lseek(fd, offset, 0) < 0)
return 0;
if (read(fd, &ch, 1) < 1)
return 0;
return 1;
}
static int find_size(int fd)
{
unsigned int high, low;
low = 0;
for (high = 1; high > 0 && valid_offset(fd, high); high *= 2)
low = high;
while (low < high - 1) {
const int mid = (low + high) / 2;
if (valid_offset(fd, mid))
low = mid;
else
high = mid;
}
return (low + 1);
}
/* return size in pages, to avoid integer overflow */
static inline long get_size(const char *file)
{
int fd;
long size;
fd = bb_xopen3(file, O_RDONLY, 0);
if (ioctl(fd, BLKGETSIZE, &size) >= 0) {
size /= pagesize / 512;
} else {
size = find_size(fd) / pagesize;
}
close(fd);
return size;
}
int mkswap_main(int argc, char **argv)
{
char *tmp;
struct stat statbuf;
int sz;
int maxpages;
int goodpages;
#ifdef __sparc__
int force = 0;
#endif
init_signature_page(); /* get pagesize */
bb_opt_complementally = "?"; /* call bb_show_usage internally */
sz = bb_getopt_ulflags(argc, argv, "+cfv:", &tmp);
if (sz & 1)
check = 1;
#ifdef __sparc__
if (sz & 2)
force = 1;
#endif
#if ENABLE_FEATURE_MKSWAP_V0
if (sz & 4) {
version = bb_xgetlarg(tmp, 10, 0, 1);
} else {
if (get_linux_version_code() < KERNEL_VERSION(2, 1, 117))
version = 0;
else
version = 1;
}
#endif
argv += optind;
argc -= optind;
goodpages = pagesize / 1024; /* cache division */
while (argc--) {
if (device_name) {
PAGES = bb_xgetlarg(argv[0], 0, 10, sz * goodpages) / goodpages;
argc = 0; /* ignore any surplus args.. */
} else {
device_name = argv[0];
sz = get_size(device_name);
argv++;
}
}
if (!device_name) {
bb_error_msg_and_die("error: Nowhere to set up swap on?");
}
if (!PAGES) {
PAGES = sz;
}
if (!version)
maxpages = V0_MAX_PAGES;
else if (get_linux_version_code() >= KERNEL_VERSION(2,2,1))
maxpages = V1_MAX_PAGES;
else {
maxpages = V1_OLD_MAX_PAGES;
if (maxpages > V1_MAX_PAGES)
maxpages = V1_MAX_PAGES;
}
if (PAGES > maxpages) {
PAGES = maxpages;
bb_error_msg("warning: truncating swap area to %ldkB",
PAGES * goodpages);
}
DEV = bb_xopen3(device_name, O_RDWR, 0);
if (fstat(DEV, &statbuf) < 0)
bb_perror_msg_and_die("%s", device_name);
if (!S_ISBLK(statbuf.st_mode))
check = 0;
else if (statbuf.st_rdev == 0x0300 || statbuf.st_rdev == 0x0340)
bb_error_msg_and_die("Will not try to make swapdevice on '%s'", device_name);
#ifdef __sparc__
if (!force && version == 0) {
/* Don't overwrite partition table unless forced */
unsigned char *buffer = (unsigned char *) signature_page;
unsigned short *q, sum;
if (read(DEV, buffer, 512) != 512)
bb_error_msg_and_die("fatal: first page unreadable");
if (buffer[508] == 0xDA && buffer[509] == 0xBE) {
q = (unsigned short *) (buffer + 510);
for (sum = 0; q >= (unsigned short *) buffer;)
sum ^= *q--;
if (!sum) {
bb_error_msg("Device '%s' contains a valid Sun disklabel.\n"
"This probably means creating v0 swap would destroy your partition table\n"
"No swap created. If you really want to create swap v0 on that device, use\n"
"the -f option to force it.", device_name);
return EXIT_FAILURE;
}
}
}
#endif
if (version == 0 || check)
check_blocks();
if (version == 0 && !bit_test_and_clear(signature_page, 0))
bb_error_msg_and_die("fatal: first page unreadable");
if (version == 1) {
p->swap_version = version;
p->last_page = PAGES - 1;
p->nr_badpages = badpages;
}
goodpages = PAGES - badpages - 1;
if (goodpages <= 0)
bb_error_msg_and_die("Unable to set up swap-space: unreadable");
printf("Setting up swapspace version %d, size = %ld bytes\n",
version, (long) (goodpages * pagesize));
write_signature((version == 0) ? "SWAP-SPACE" : "SWAPSPACE2");
sz = ((version == 0) ? 0 : 1024); /* offset */
if (lseek(DEV, sz, SEEK_SET) != sz)
bb_error_msg_and_die("unable to rewind swap-device");
goodpages = pagesize - sz; /* cache substraction */
if (write(DEV, (char *) signature_page + sz, goodpages)
!= goodpages)
bb_error_msg_and_die("unable to write signature page");
/*
* A subsequent swapon() will fail if the signature
* is not actually on disk. (This is a kernel bug.)
*/
if (fsync(DEV))
bb_error_msg_and_die("fsync failed");
if (ENABLE_FEATURE_CLEAN_UP) {
close(DEV);
free(signature_page);
}
return EXIT_SUCCESS;
}