mirror of
https://github.com/sheumann/hush.git
synced 2024-12-27 01:32:08 +00:00
8a6a2f9c9c
This change makes "tar tf hello_world.txz" work without adding special-casing for ".txz" extension. It also removes ever-growing magic checking code in rpm2cpio and get_header_tar - we reuse one which lives in setup_unzip_on_fd. function old new delta unpack_gz_stream 7 566 +559 check_signature16 - 70 +70 setup_unzip_on_fd 99 142 +43 handle_SIGCHLD - 41 +41 unpack_bz2_stream 342 376 +34 unzip_main 2352 2385 +33 bbunpack 503 533 +30 open_transformer 74 102 +28 unpack_Z_stream 1278 1304 +26 unpack_gunzip 101 123 +22 init_transformer_aux_data - 18 +18 unpack_xz_stream 2388 2402 +14 open_zipped 131 141 +10 rpm_main 1358 1363 +5 get_header_tar_lzma 52 57 +5 get_header_tar_bz2 52 57 +5 unpack_lzma_stream 2698 2702 +4 hash_find 234 233 -1 get_header_tar 1759 1733 -26 get_header_tar_gz 92 57 -35 unpack_uncompress 51 12 -39 rpm2cpio_main 201 147 -54 unpack_unxz 67 12 -55 unpack_bz2_stream_prime 55 - -55 get_header_tar_Z 86 - -86 unpack_gz_stream_with_info 539 - -539 ------------------------------------------------------------------------------ (add/remove: 3/3 grow/shrink: 14/6 up/down: 947/-890) Total: 57 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
257 lines
8.0 KiB
Plaintext
257 lines
8.0 KiB
Plaintext
Keeping data small
|
|
|
|
When many applets are compiled into busybox, all rw data and
|
|
bss for each applet are concatenated. Including those from libc,
|
|
if static busybox is built. When busybox is started, _all_ this data
|
|
is allocated, not just that one part for selected applet.
|
|
|
|
What "allocated" exactly means, depends on arch.
|
|
On NOMMU it's probably bites the most, actually using real
|
|
RAM for rwdata and bss. On i386, bss is lazily allocated
|
|
by COWed zero pages. Not sure about rwdata - also COW?
|
|
|
|
In order to keep busybox NOMMU and small-mem systems friendly
|
|
we should avoid large global data in our applets, and should
|
|
minimize usage of libc functions which implicitly use
|
|
such structures.
|
|
|
|
Small experiment to measure "parasitic" bbox memory consumption:
|
|
here we start 1000 "busybox sleep 10" in parallel.
|
|
busybox binary is practically allyesconfig static one,
|
|
built against uclibc. Run on x86-64 machine with 64-bit kernel:
|
|
|
|
bash-3.2# nmeter '%t %c %m %p %[pn]'
|
|
23:17:28 .......... 168M 0 147
|
|
23:17:29 .......... 168M 0 147
|
|
23:17:30 U......... 168M 1 147
|
|
23:17:31 SU........ 181M 244 391
|
|
23:17:32 SSSSUUU... 223M 757 1147
|
|
23:17:33 UUU....... 223M 0 1147
|
|
23:17:34 U......... 223M 1 1147
|
|
23:17:35 .......... 223M 0 1147
|
|
23:17:36 .......... 223M 0 1147
|
|
23:17:37 S......... 223M 0 1147
|
|
23:17:38 .......... 223M 1 1147
|
|
23:17:39 .......... 223M 0 1147
|
|
23:17:40 .......... 223M 0 1147
|
|
23:17:41 .......... 210M 0 906
|
|
23:17:42 .......... 168M 1 147
|
|
23:17:43 .......... 168M 0 147
|
|
|
|
This requires 55M of memory. Thus 1 trivial busybox applet
|
|
takes 55k of memory on 64-bit x86 kernel.
|
|
|
|
On 32-bit kernel we need ~26k per applet.
|
|
|
|
Script:
|
|
|
|
i=1000; while test $i != 0; do
|
|
echo -n .
|
|
busybox sleep 30 &
|
|
i=$((i - 1))
|
|
done
|
|
echo
|
|
wait
|
|
|
|
(Data from NOMMU arches are sought. Provide 'size busybox' output too)
|
|
|
|
|
|
Example 1
|
|
|
|
One example how to reduce global data usage is in
|
|
archival/libarchive/decompress_unzip.c:
|
|
|
|
/* This is somewhat complex-looking arrangement, but it allows
|
|
* to place decompressor state either in bss or in
|
|
* malloc'ed space simply by changing #defines below.
|
|
* Sizes on i386:
|
|
* text data bss dec hex
|
|
* 5256 0 108 5364 14f4 - bss
|
|
* 4915 0 0 4915 1333 - malloc
|
|
*/
|
|
#define STATE_IN_BSS 0
|
|
#define STATE_IN_MALLOC 1
|
|
|
|
(see the rest of the file to get the idea)
|
|
|
|
This example completely eliminates globals in that module.
|
|
Required memory is allocated in unpack_gz_stream() [its main module]
|
|
and then passed down to all subroutines which need to access 'globals'
|
|
as a parameter.
|
|
|
|
|
|
Example 2
|
|
|
|
In case you don't want to pass this additional parameter everywhere,
|
|
take a look at archival/gzip.c. Here all global data is replaced by
|
|
single global pointer (ptr_to_globals) to allocated storage.
|
|
|
|
In order to not duplicate ptr_to_globals in every applet, you can
|
|
reuse single common one. It is defined in libbb/messages.c
|
|
as struct globals *const ptr_to_globals, but the struct globals is
|
|
NOT defined in libbb.h. You first define your own struct:
|
|
|
|
struct globals { int a; char buf[1000]; };
|
|
|
|
and then declare that ptr_to_globals is a pointer to it:
|
|
|
|
#define G (*ptr_to_globals)
|
|
|
|
ptr_to_globals is declared as constant pointer.
|
|
This helps gcc understand that it won't change, resulting in noticeably
|
|
smaller code. In order to assign it, use SET_PTR_TO_GLOBALS macro:
|
|
|
|
SET_PTR_TO_GLOBALS(xzalloc(sizeof(G)));
|
|
|
|
Typically it is done in <applet>_main().
|
|
|
|
Now you can reference "globals" by G.a, G.buf and so on, in any function.
|
|
|
|
|
|
bb_common_bufsiz1
|
|
|
|
There is one big common buffer in bss - bb_common_bufsiz1. It is a much
|
|
earlier mechanism to reduce bss usage. Each applet can use it for
|
|
its needs. Library functions are prohibited from using it.
|
|
|
|
'G.' trick can be done using bb_common_bufsiz1 instead of malloced buffer:
|
|
|
|
#define G (*(struct globals*)&bb_common_bufsiz1)
|
|
|
|
Be careful, though, and use it only if globals fit into bb_common_bufsiz1.
|
|
Since bb_common_bufsiz1 is BUFSIZ + 1 bytes long and BUFSIZ can change
|
|
from one libc to another, you have to add compile-time check for it:
|
|
|
|
if (sizeof(struct globals) > sizeof(bb_common_bufsiz1))
|
|
BUG_<applet>_globals_too_big();
|
|
|
|
|
|
Drawbacks
|
|
|
|
You have to initialize it by hand. xzalloc() can be helpful in clearing
|
|
allocated storage to 0, but anything more must be done by hand.
|
|
|
|
All global variables are prefixed by 'G.' now. If this makes code
|
|
less readable, use #defines:
|
|
|
|
#define dev_fd (G.dev_fd)
|
|
#define sector (G.sector)
|
|
|
|
|
|
Word of caution
|
|
|
|
If applet doesn't use much of global data, converting it to use
|
|
one of above methods is not worth the resulting code obfuscation.
|
|
If you have less than ~300 bytes of global data - don't bother.
|
|
|
|
|
|
Finding non-shared duplicated strings
|
|
|
|
strings busybox | sort | uniq -c | sort -nr
|
|
|
|
|
|
gcc's data alignment problem
|
|
|
|
The following attribute added in vi.c:
|
|
|
|
static int tabstop;
|
|
static struct termios term_orig __attribute__ ((aligned (4)));
|
|
static struct termios term_vi __attribute__ ((aligned (4)));
|
|
|
|
reduces bss size by 32 bytes, because gcc sometimes aligns structures to
|
|
ridiculously large values. asm output diff for above example:
|
|
|
|
tabstop:
|
|
.zero 4
|
|
.section .bss.term_orig,"aw",@nobits
|
|
- .align 32
|
|
+ .align 4
|
|
.type term_orig, @object
|
|
.size term_orig, 60
|
|
term_orig:
|
|
.zero 60
|
|
.section .bss.term_vi,"aw",@nobits
|
|
- .align 32
|
|
+ .align 4
|
|
.type term_vi, @object
|
|
.size term_vi, 60
|
|
|
|
gcc doesn't seem to have options for altering this behaviour.
|
|
|
|
gcc 3.4.3 and 4.1.1 tested:
|
|
char c = 1;
|
|
// gcc aligns to 32 bytes if sizeof(struct) >= 32
|
|
struct {
|
|
int a,b,c,d;
|
|
int i1,i2,i3;
|
|
} s28 = { 1 }; // struct will be aligned to 4 bytes
|
|
struct {
|
|
int a,b,c,d;
|
|
int i1,i2,i3,i4;
|
|
} s32 = { 1 }; // struct will be aligned to 32 bytes
|
|
// same for arrays
|
|
char vc31[31] = { 1 }; // unaligned
|
|
char vc32[32] = { 1 }; // aligned to 32 bytes
|
|
|
|
-fpack-struct=1 reduces alignment of s28 to 1 (but probably
|
|
will break layout of many libc structs) but s32 and vc32
|
|
are still aligned to 32 bytes.
|
|
|
|
I will try to cook up a patch to add a gcc option for disabling it.
|
|
Meanwhile, this is where it can be disabled in gcc source:
|
|
|
|
gcc/config/i386/i386.c
|
|
int
|
|
ix86_data_alignment (tree type, int align)
|
|
{
|
|
#if 0
|
|
if (AGGREGATE_TYPE_P (type)
|
|
&& TYPE_SIZE (type)
|
|
&& TREE_CODE (TYPE_SIZE (type)) == INTEGER_CST
|
|
&& (TREE_INT_CST_LOW (TYPE_SIZE (type)) >= 256
|
|
|| TREE_INT_CST_HIGH (TYPE_SIZE (type))) && align < 256)
|
|
return 256;
|
|
#endif
|
|
|
|
Result (non-static busybox built against glibc):
|
|
|
|
# size /usr/srcdevel/bbox/fix/busybox.t0/busybox busybox
|
|
text data bss dec hex filename
|
|
634416 2736 23856 661008 a1610 busybox
|
|
632580 2672 22944 658196 a0b14 busybox_noalign
|
|
|
|
|
|
|
|
Keeping code small
|
|
|
|
Set CONFIG_EXTRA_CFLAGS="-fno-inline-functions-called-once",
|
|
produce "make bloatcheck", see the biggest auto-inlined functions.
|
|
Now, set CONFIG_EXTRA_CFLAGS back to "", but add NOINLINE
|
|
to some of these functions. In 1.16.x timeframe, the results were
|
|
(annotated "make bloatcheck" output):
|
|
|
|
function old new delta
|
|
expand_vars_to_list - 1712 +1712 win
|
|
lzo1x_optimize - 1429 +1429 win
|
|
arith_apply - 1326 +1326 win
|
|
read_interfaces - 1163 +1163 loss, leave w/o NOINLINE
|
|
logdir_open - 1148 +1148 win
|
|
check_deps - 1148 +1148 loss
|
|
rewrite - 1039 +1039 win
|
|
run_pipe 358 1396 +1038 win
|
|
write_status_file - 1029 +1029 almost the same, leave w/o NOINLINE
|
|
dump_identity - 987 +987 win
|
|
mainQSort3 - 921 +921 win
|
|
parse_one_line - 916 +916 loss
|
|
summarize - 897 +897 almost the same
|
|
do_shm - 884 +884 win
|
|
cpio_o - 863 +863 win
|
|
subCommand - 841 +841 loss
|
|
receive - 834 +834 loss
|
|
|
|
855 bytes saved in total.
|
|
|
|
scripts/mkdiff_obj_bloat may be useful to automate this process: run
|
|
"scripts/mkdiff_obj_bloat NORMALLY_BUILT_TREE FORCED_NOINLINE_TREE"
|
|
and select modules which shrank.
|