mirror of
https://github.com/sheumann/hush.git
synced 2024-12-23 05:29:58 +00:00
8d89bed840
function old new delta watchdog_main 159 219 +60 mdev: support match by major,minor. See bug 4714. +100 bytes.
128 lines
4.9 KiB
Plaintext
128 lines
4.9 KiB
Plaintext
-------------
|
|
MDEV Primer
|
|
-------------
|
|
|
|
For those of us who know how to use mdev, a primer might seem lame. For
|
|
everyone else, mdev is a weird black box that they hear is awesome, but can't
|
|
seem to get their head around how it works. Thus, a primer.
|
|
|
|
-----------
|
|
Basic Use
|
|
-----------
|
|
|
|
Mdev has two primary uses: initial population and dynamic updates. Both
|
|
require sysfs support in the kernel and have it mounted at /sys. For dynamic
|
|
updates, you also need to have hotplugging enabled in your kernel.
|
|
|
|
Here's a typical code snippet from the init script:
|
|
[0] mount -t proc proc /proc
|
|
[1] mount -t sysfs sysfs /sys
|
|
[2] echo /bin/mdev > /proc/sys/kernel/hotplug
|
|
[3] mdev -s
|
|
|
|
Alternatively, without procfs the above becomes:
|
|
[1] mount -t sysfs sysfs /sys
|
|
[2] sysctl -w kernel.hotplug=/bin/mdev
|
|
[3] mdev -s
|
|
|
|
|
|
Of course, a more "full" setup would entail executing this before the previous
|
|
code snippet:
|
|
[4] mount -t tmpfs -o size=64k,mode=0755 tmpfs /dev
|
|
[5] mkdir /dev/pts
|
|
[6] mount -t devpts devpts /dev/pts
|
|
|
|
The simple explanation here is that [1] you need to have /sys mounted before
|
|
executing mdev. Then you [2] instruct the kernel to execute /bin/mdev whenever
|
|
a device is added or removed so that the device node can be created or
|
|
destroyed. Then you [3] seed /dev with all the device nodes that were created
|
|
while the system was booting.
|
|
|
|
For the "full" setup, you want to [4] make sure /dev is a tmpfs filesystem
|
|
(assuming you're running out of flash). Then you want to [5] create the
|
|
/dev/pts mount point and finally [6] mount the devpts filesystem on it.
|
|
|
|
-------------
|
|
MDEV Config (/etc/mdev.conf)
|
|
-------------
|
|
|
|
Mdev has an optional config file for controlling ownership/permissions of
|
|
device nodes if your system needs something more than the default root/root
|
|
660 permissions.
|
|
|
|
The file has the format:
|
|
<device regex> <uid>:<gid> <octal permissions>
|
|
or @<maj[,min1[-min2]]> <uid>:<gid> <octal permissions>
|
|
|
|
For example:
|
|
hd[a-z][0-9]* 0:3 660
|
|
|
|
The config file parsing stops at the first matching line. If no line is
|
|
matched, then the default of 0:0 660 is used. To set your own default, simply
|
|
create your own total match like so:
|
|
.* 1:1 777
|
|
|
|
You can rename/move device nodes by using the next optional field.
|
|
<device regex> <uid>:<gid> <octal permissions> [=path]
|
|
So if you want to place the device node into a subdirectory, make sure the path
|
|
has a trailing /. If you want to rename the device node, just place the name.
|
|
hda 0:3 660 =drives/
|
|
This will move "hda" into the drives/ subdirectory.
|
|
hdb 0:3 660 =cdrom
|
|
This will rename "hdb" to "cdrom".
|
|
|
|
Similarly, ">path" renames/moves the device but it also creates
|
|
a direct symlink /dev/DEVNAME to the renamed/moved device.
|
|
|
|
If you also enable support for executing your own commands, then the file has
|
|
the format:
|
|
<device regex> <uid>:<gid> <octal permissions> [=path] [@|$|*<command>]
|
|
or
|
|
<device regex> <uid>:<gid> <octal permissions> [>path] [@|$|*<command>]
|
|
The special characters have the meaning:
|
|
@ Run after creating the device.
|
|
$ Run before removing the device.
|
|
* Run both after creating and before removing the device.
|
|
|
|
The command is executed via the system() function (which means you're giving a
|
|
command to the shell), so make sure you have a shell installed at /bin/sh. You
|
|
should also keep in mind that the kernel executes hotplug helpers with stdin,
|
|
stdout, and stderr connected to /dev/null.
|
|
|
|
For your convenience, the shell env var $MDEV is set to the device name. So if
|
|
the device "hdc" was matched, MDEV would be set to "hdc".
|
|
|
|
----------
|
|
FIRMWARE
|
|
----------
|
|
|
|
Some kernel device drivers need to request firmware at runtime in order to
|
|
properly initialize a device. Place all such firmware files into the
|
|
/lib/firmware/ directory. At runtime, the kernel will invoke mdev with the
|
|
filename of the firmware which mdev will load out of /lib/firmware/ and into
|
|
the kernel via the sysfs interface. The exact filename is hardcoded in the
|
|
kernel, so look there if you need to know how to name the file in userspace.
|
|
|
|
------------
|
|
SEQUENCING
|
|
------------
|
|
|
|
Kernel does not serialize hotplug events. It increments SEQNUM environmental
|
|
variable for each successive hotplug invocation. Normally, mdev doesn't care.
|
|
This may reorder hotplug and hot-unplug events, with typical symptoms of
|
|
device nodes sometimes not created as expected.
|
|
|
|
However, if /dev/mdev.seq file is found, mdev will compare its
|
|
contents with SEQNUM. It will retry up to two seconds, waiting for them
|
|
to match. If they match exactly (not even trailing '\n' is allowed),
|
|
or if two seconds pass, mdev runs as usual, then it rewrites /dev/mdev.seq
|
|
with SEQNUM+1.
|
|
|
|
IOW: this will serialize concurrent mdev invocations.
|
|
|
|
If you want to activate this feature, execute "echo >/dev/mdev.seq" prior to
|
|
setting mdev to be the hotplug handler. This writes single '\n' to the file.
|
|
NB: mdev recognizes /dev/mdev.seq consisting of single '\n' characher
|
|
as a special case. IOW: this will not make your first hotplug event
|
|
to stall for two seconds.
|