; Initialization and setup routines for the second background _InitBG1 jsr _ApplyBG1YPos jsr _ApplyBG1XPos rts ; Copy a binary image data file into BG1. Assumes the file is the correct size (328 x 208) ; ; A=low word of picture address ; X=high word of pixture address ; Y=high word of BG1 bank _CopyBinToBG1 :src_width equ tmp6 :src_height equ tmp7 clc adc #8 ; Advance over the header pha lda #164 sta :src_width lda #208 sta :src_height pla jmp _CopyToBG1 ; Copy a IIgs $C1 picture into BG1. Assumes the file is the correct size (320 x 200) ; ; A=low word of picture address ; X=high word of pixture address ; Y=high word of BG1 bank _CopyPicToBG1 :src_width equ tmp6 :src_height equ tmp7 :src_stride equ tmp8 pha lda #160 sta :src_width sta :src_stride lda #200 sta :src_height pla jmp _CopyToBG1 ; Generic routine to copy image data into BG1 _CopyToBG1 :srcptr equ tmp0 :line_cnt equ tmp2 :dstptr equ tmp3 :col_cnt equ tmp5 :src_width equ tmp6 :src_height equ tmp7 :src_stride equ tmp8 sta :srcptr stx :srcptr+2 sty :dstptr+2 ; Everything goes into this bank stz :line_cnt :rloop lda :line_cnt ; get the pointer to the code field line asl tax lda BG1YTable,x sta :dstptr ldy #0 ; move forward in the image data and image data :cloop lda [:srcptr],y sta [:dstptr],y iny iny cpy :src_width bcc :cloop ldy #164 lda [:srcptr] ; Duplicate the last couple of words in the extra space at the end of the line sta [:dstptr],y ldy #2 lda [:srcptr],y ldy #166 sta [:dstptr],y lda :srcptr clc adc :src_stride sta :srcptr inc :line_cnt lda :line_cnt cmp :src_height bcc :rloop rts _SetBG1XPos cmp BG1StartX beq :out ; Easy, if nothing changed, then nothing changes ldx BG1StartX ; Load the old value (but don't save it yet) sta BG1StartX ; Save the new position lda #DIRTY_BIT_BG1_X tsb DirtyBits ; Check if the value is already dirty, if so exit bne :out ; without overwriting the original value stx OldBG1StartX ; First change, so preserve the value :out rts _SetBG1YPos cmp BG1StartY beq :out ; Easy, if nothing changed, then nothing changes ldx BG1StartY ; Load the old value (but don't save it yet) sta BG1StartY ; Save the new position lda #DIRTY_BIT_BG1_Y tsb DirtyBits ; Check if the value is already dirty, if so exit bne :out ; without overwriting the original value stx OldBG1StartY ; First change, so preserve the value :out rts ; Everytime either BG1 or BG0 X-position changes, we have to update the direct page values. We ; *could* do this by adjusting the since the address offset, but we have to change up to 200 values ; when the vertical position changes, and only 41 when the horizontal value changes. Plus ; these are all direct page values ; ; Note: This routine can be optimized as an unrolled loop of PEI instructions _ApplyBG1XPosPre lda BG1StartX ; This is the starting byte offset (0 - 163) jsr Mod164 sta BG1StartXMod164 rts _ApplyBG1XPos lda #162 sec sbc StartXMod164 ; Need to compensate for both BG0 and BG1 positions bpl *+6 clc adc #164 clc adc BG1StartXMod164 cmp #164 bcc *+5 sbc #164 tay phd ; save the direct page because we are going to switch to the lda BlitterDP ; blitter direct page space and fill in the addresses tcd ldx #162 tya :loop sta 00,x ; store the value dec dec bpl :nowrap clc adc #164 :nowrap dex dex bpl :loop pld rts _ClearBG1Buffer phb pha sep #$20 lda BG1DataBank pha plb rep #$20 pla ldx #0 :loop sta: $0000,x inx inx cpx #0 bne :loop plb rts ; Everytime either BG1 or BG0 Y-position changes, we have to update the Y-register ; value in all of the code fields (within the visible screen) _ApplyBG1YPos :virt_line equ tmp0 :lines_left equ tmp1 :draw_count equ tmp2 :ytbl_idx equ tmp3 phb ; Save the bank lda BG1StartY jsr Mod208 sta BG1StartYMod208 sta :ytbl_idx ; Start copying from the first entry in the table lda StartYMod208 ; This is the base line of the virtual screen sta :virt_line ; Keep track of it lda ScreenHeight sta :lines_left :loop lda :virt_line asl tax ldal BTableLow,x ; Get the address of the first code field line tay sep #$20 ldal BTableHigh,x pha ; push the bank on the stack plb rep #$20 lda :virt_line and #$000F eor #$FFFF inc clc adc #16 min :lines_left sta :draw_count ; Do this many lines asl tax lda RenderFlags bit #RENDER_BG1_HORZ_OFFSET ; Are we using horizontal displacement? beq :no_displacement lda :ytbl_idx ; Read from this location in the BG1YTable asl jsr CopyBG1YTableToBG1Addr2 bra :next_step :no_displacement lda :ytbl_idx ; Read from this location in the BG1YTable asl jsr CopyBG1YTableToBG1Addr ; or CopyBG1YTableToBG1Addr2 :next_step lda :virt_line ; advance to the virtual line after the segment we just clc ; filled in adc :draw_count sta :virt_line lda :ytbl_idx ; advance the index into the YTable adc :draw_count sta :ytbl_idx lda :lines_left ; subtract the number of lines we just completed sec sbc :draw_count sta :lines_left jne :loop plb rts ; Unrolled copy routine to move BG1YTable entries into BG1_ADDR position. ; ; A = index into the BG1YTable array (x2) ; Y = starting line * $1000 ; X = number of lines (x2) CopyBG1YTableToBG1Addr jmp (:tbl,x) :tbl da :none da :do01,:do02,:do03,:do04 da :do05,:do06,:do07,:do08 da :do09,:do10,:do11,:do12 da :do13,:do14,:do15,:do16 :do15 tax bra :x15 :do14 tax bra :x14 :do13 tax bra :x13 :do12 tax bra :x12 :do11 tax bra :x11 :do10 tax bra :x10 :do09 tax bra :x09 :do08 tax bra :x08 :do07 tax bra :x07 :do06 tax bra :x06 :do05 tax bra :x05 :do04 tax bra :x04 :do03 tax bra :x03 :do02 tax bra :x02 :do01 tax bra :x01 :do16 tax ldal BG1YTable+30,x sta BG1_ADDR+$F000,y :x15 ldal BG1YTable+28,x sta BG1_ADDR+$E000,y :x14 ldal BG1YTable+26,x sta BG1_ADDR+$D000,y :x13 ldal BG1YTable+24,x sta BG1_ADDR+$C000,y :x12 ldal BG1YTable+22,x sta BG1_ADDR+$B000,y :x11 ldal BG1YTable+20,x sta BG1_ADDR+$A000,y :x10 ldal BG1YTable+18,x sta BG1_ADDR+$9000,y :x09 ldal BG1YTable+16,x sta BG1_ADDR+$8000,y :x08 ldal BG1YTable+14,x sta BG1_ADDR+$7000,y :x07 ldal BG1YTable+12,x sta BG1_ADDR+$6000,y :x06 ldal BG1YTable+10,x sta BG1_ADDR+$5000,y :x05 ldal BG1YTable+08,x sta: BG1_ADDR+$4000,y :x04 ldal BG1YTable+06,x sta BG1_ADDR+$3000,y :x03 ldal BG1YTable+04,x sta BG1_ADDR+$2000,y :x02 ldal BG1YTable+02,x sta BG1_ADDR+$1000,y :x01 ldal BG1YTable+00,x sta: BG1_ADDR+$0000,y :none rts ; Unrolled copy routine to move BG1YTable entries into BG1_ADDR position with an additional ; shift. This has to be split into two ; ; A = index into the BG1YTable array (x2) ; Y = starting line * $1000 ; X = number of lines (x2) CopyBG1YTableToBG1Addr2 phy ; save the registers phx phb pha jsr _SetDataBank ; Set to toolbox data bank pla ldy BG1OffsetIndex ; Get the offset and save the values jsr SaveBG1OffsetValues plb plx ; x is used directly in this routine ply jmp ApplyBG1OffsetValues SaveBG1OffsetValues jmp (:tbl,x) :tbl da :none da :do01,:do02,:do03,:do04 da :do05,:do06,:do07,:do08 da :do09,:do10,:do11,:do12 da :do13,:do14,:do15,:do16 :do15 tax bra :x15 :do14 tax bra :x14 :do13 tax bra :x13 :do12 tax bra :x12 :do11 tax bra :x11 :do10 tax bra :x10 :do09 tax bra :x09 :do08 tax bra :x08 :do16 tax lda BG1YTable+30,x adc BG1YOffsetTable+30,y sta BG1YCache+30 :x15 lda BG1YTable+28,x adc BG1YOffsetTable+28,y sta BG1YCache+28 :x14 lda BG1YTable+26,x adc BG1YOffsetTable+26,y sta BG1YCache+26 :x13 lda BG1YTable+24,x adc BG1YOffsetTable+24,y sta BG1YCache+24 :x12 lda BG1YTable+22,x adc BG1YOffsetTable+22,y sta BG1YCache+22 :x11 lda BG1YTable+20,x adc BG1YOffsetTable+20,y sta BG1YCache+20 :x10 lda BG1YTable+18,x adc BG1YOffsetTable+18,y sta BG1YCache+18 :x09 lda BG1YTable+16,x adc BG1YOffsetTable+16,y sta BG1YCache+16 :x08 lda BG1YTable+14,x adc BG1YOffsetTable+14,y sta BG1YCache+14 :x07 lda BG1YTable+12,x adc BG1YOffsetTable+12,y sta BG1YCache+12 :x06 lda BG1YTable+10,x adc BG1YOffsetTable+10,y sta BG1YCache+10 :x05 lda BG1YTable+08,x adc BG1YOffsetTable+08,y sta BG1YCache+08 :x04 lda BG1YTable+06,x adc BG1YOffsetTable+06,y sta BG1YCache+06 :x03 lda BG1YTable+04,x adc BG1YOffsetTable+04,y sta BG1YCache+04 :x02 lda BG1YTable+02,x adc BG1YOffsetTable+02,y sta BG1YCache+02 :x01 lda BG1YTable+00,x adc BG1YOffsetTable+00,y sta BG1YCache+00 :none rts :do07 tax bra :x07 :do06 tax bra :x06 :do05 tax bra :x05 :do04 tax bra :x04 :do03 tax bra :x03 :do02 tax bra :x02 :do01 tax bra :x01 ApplyBG1OffsetValues jmp (:tbl,x) :tbl da :none da :do01,:do02,:do03,:do04 da :do05,:do06,:do07,:do08 da :do09,:do10,:do11,:do12 da :do13,:do14,:do15,:do16 :do16 ldal BG1YCache+30 sta BG1_ADDR+$F000,y :do15 ldal BG1YCache+28 sta BG1_ADDR+$E000,y :do14 ldal BG1YCache+26 sta BG1_ADDR+$D000,y :do13 ldal BG1YCache+24 sta BG1_ADDR+$C000,y :do12 ldal BG1YCache+22 sta BG1_ADDR+$B000,y :do11 ldal BG1YCache+20 sta BG1_ADDR+$A000,y :do10 ldal BG1YCache+18 sta BG1_ADDR+$9000,y :do09 ldal BG1YCache+16 sta BG1_ADDR+$8000,y :do08 ldal BG1YCache+14 sta BG1_ADDR+$7000,y :do07 ldal BG1YCache+12 sta BG1_ADDR+$6000,y :do06 ldal BG1YCache+10 sta BG1_ADDR+$5000,y :do05 ldal BG1YCache+08 sta: BG1_ADDR+$4000,y :do04 ldal BG1YCache+06 sta BG1_ADDR+$3000,y :do03 ldal BG1YCache+04 sta BG1_ADDR+$2000,y :do02 ldal BG1YCache+02 sta BG1_ADDR+$1000,y :do01 ldal BG1YCache+00 sta: BG1_ADDR+$0000,y :none rts