diff --git a/telnet.h b/telnet.h index 6098d5d..855b3d2 100644 --- a/telnet.h +++ b/telnet.h @@ -1,6 +1,43 @@ -#ifndef __TELNET_H__ -#define __TELNET_H__ +/*- + * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright (c) 1983, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)telnet.h 8.2 (Berkeley) 12/15/93 + * $FreeBSD$ + */ +#ifndef _ARPA_TELNET_H_ +#define _ARPA_TELNET_H_ + +/* + * Definitions for the TELNET protocol. + */ #define IAC 255 /* interpret as command: */ #define DONT 254 /* you are not to use option */ #define DO 253 /* please, you use option */ @@ -24,9 +61,21 @@ #define SYNCH 242 /* for telfunc calls */ +#ifdef TELCMDS +const char *telcmds[] = { + "EOF", "SUSP", "ABORT", "EOR", + "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC", + "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", + 0 +}; +#else +extern char *telcmds[]; +#endif + #define TELCMD_FIRST xEOF #define TELCMD_LAST IAC -#define TELCMD_OK(x) ((x) <= TELCMD_LAST && (x) >= TELCMD_FIRST) +#define TELCMD_OK(x) ((unsigned int)(x) <= TELCMD_LAST && \ + (unsigned int)(x) >= TELCMD_FIRST) #define TELCMD(x) telcmds[(x)-TELCMD_FIRST] /* telnet options */ @@ -65,19 +114,232 @@ #define TELOPT_TSPEED 32 /* terminal speed */ #define TELOPT_LFLOW 33 /* remote flow control */ #define TELOPT_LINEMODE 34 /* Linemode option */ -#define TELOPT_XDISPLOC 35 -#define TELOPT_OLD_ENVIRON 36 -#define TELOPT_AUTHENTICATION 37 /* authenticate */ -#define TELOPT_ENCRYPT 38 /* encryption */ -#define TELOPT_NEW_ENVIRON 39 - +#define TELOPT_XDISPLOC 35 /* X Display Location */ +#define TELOPT_OLD_ENVIRON 36 /* Old - Environment variables */ +#define TELOPT_AUTHENTICATION 37/* Authenticate */ +#define TELOPT_ENCRYPT 38 /* Encryption option */ +#define TELOPT_NEW_ENVIRON 39 /* New - Environment variables */ +#define TELOPT_TN3270E 40 /* RFC2355 - TN3270 Enhancements */ +#define TELOPT_CHARSET 42 /* RFC2066 - Charset */ +#define TELOPT_COMPORT 44 /* RFC2217 - Com Port Control */ +#define TELOPT_KERMIT 47 /* RFC2840 - Kermit */ #define TELOPT_EXOPL 255 /* extended-options-list */ -#define TELQUAL_IS 0 -#define TELQUAL_SEND 1 -#define TELQUAL_INFO 2 -#define TELQUAL_REPLY 2 -#define TELQUAL_NAME 3 - +#define NTELOPTS (1+TELOPT_KERMIT) +#ifdef TELOPTS +const char *telopts[NTELOPTS+1] = { + "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME", + "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP", + "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS", + "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO", + "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT", + "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD", + "TACACS UID", "OUTPUT MARKING", "TTYLOC", + "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW", + "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION", + "ENCRYPT", "NEW-ENVIRON", "TN3270E", "XAUTH", "CHARSET", + "RSP", "COM-PORT", "SLE", "STARTTLS", "KERMIT", + 0 +}; +#define TELOPT_FIRST TELOPT_BINARY +#define TELOPT_LAST TELOPT_KERMIT +#define TELOPT_OK(x) ((unsigned int)(x) <= TELOPT_LAST) +#define TELOPT(x) telopts[(x)-TELOPT_FIRST] #endif + +/* sub-option qualifiers */ +#define TELQUAL_IS 0 /* option is... */ +#define TELQUAL_SEND 1 /* send option */ +#define TELQUAL_INFO 2 /* ENVIRON: informational version of IS */ +#define TELQUAL_REPLY 2 /* AUTHENTICATION: client version of IS */ +#define TELQUAL_NAME 3 /* AUTHENTICATION: client version of IS */ + +#define LFLOW_OFF 0 /* Disable remote flow control */ +#define LFLOW_ON 1 /* Enable remote flow control */ +#define LFLOW_RESTART_ANY 2 /* Restart output on any char */ +#define LFLOW_RESTART_XON 3 /* Restart output only on XON */ + +/* + * LINEMODE suboptions + */ + +#define LM_MODE 1 +#define LM_FORWARDMASK 2 +#define LM_SLC 3 + +#define MODE_EDIT 0x01 +#define MODE_TRAPSIG 0x02 +#define MODE_ACK 0x04 +#define MODE_SOFT_TAB 0x08 +#define MODE_LIT_ECHO 0x10 + +#define MODE_MASK 0x1f + +/* Not part of protocol, but needed to simplify things... */ +#define MODE_FLOW 0x0100 +#define MODE_ECHO 0x0200 +#define MODE_INBIN 0x0400 +#define MODE_OUTBIN 0x0800 +#define MODE_FORCE 0x1000 + +#define SLC_SYNCH 1 +#define SLC_BRK 2 +#define SLC_IP 3 +#define SLC_AO 4 +#define SLC_AYT 5 +#define SLC_EOR 6 +#define SLC_ABORT 7 +#define SLC_EOF 8 +#define SLC_SUSP 9 +#define SLC_EC 10 +#define SLC_EL 11 +#define SLC_EW 12 +#define SLC_RP 13 +#define SLC_LNEXT 14 +#define SLC_XON 15 +#define SLC_XOFF 16 +#define SLC_FORW1 17 +#define SLC_FORW2 18 +#define SLC_MCL 19 +#define SLC_MCR 20 +#define SLC_MCWL 21 +#define SLC_MCWR 22 +#define SLC_MCBOL 23 +#define SLC_MCEOL 24 +#define SLC_INSRT 25 +#define SLC_OVER 26 +#define SLC_ECR 27 +#define SLC_EWR 28 +#define SLC_EBOL 29 +#define SLC_EEOL 30 + +#define NSLC 30 + +/* + * For backwards compatibility, we define SLC_NAMES to be the + * list of names if SLC_NAMES is not defined. + */ +#define SLC_NAMELIST "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \ + "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \ + "LNEXT", "XON", "XOFF", "FORW1", "FORW2", \ + "MCL", "MCR", "MCWL", "MCWR", "MCBOL", \ + "MCEOL", "INSRT", "OVER", "ECR", "EWR", \ + "EBOL", "EEOL", \ + 0 + +#ifdef SLC_NAMES +const char *slc_names[] = { + SLC_NAMELIST +}; +#else +extern char *slc_names[]; +#define SLC_NAMES SLC_NAMELIST +#endif + +#define SLC_NAME_OK(x) ((unsigned int)(x) <= NSLC) +#define SLC_NAME(x) slc_names[x] + +#define SLC_NOSUPPORT 0 +#define SLC_CANTCHANGE 1 +#define SLC_VARIABLE 2 +#define SLC_DEFAULT 3 +#define SLC_LEVELBITS 0x03 + +#define SLC_FUNC 0 +#define SLC_FLAGS 1 +#define SLC_VALUE 2 + +#define SLC_ACK 0x80 +#define SLC_FLUSHIN 0x40 +#define SLC_FLUSHOUT 0x20 + +#define OLD_ENV_VAR 1 +#define OLD_ENV_VALUE 0 +#define NEW_ENV_VAR 0 +#define NEW_ENV_VALUE 1 +#define ENV_ESC 2 +#define ENV_USERVAR 3 + +/* + * AUTHENTICATION suboptions + */ + +/* + * Who is authenticating who ... + */ +#define AUTH_WHO_CLIENT 0 /* Client authenticating server */ +#define AUTH_WHO_SERVER 1 /* Server authenticating client */ +#define AUTH_WHO_MASK 1 + +/* + * amount of authentication done + */ +#define AUTH_HOW_ONE_WAY 0 +#define AUTH_HOW_MUTUAL 2 +#define AUTH_HOW_MASK 2 + +#define AUTHTYPE_NULL 0 +#define AUTHTYPE_KERBEROS_V4 1 +#define AUTHTYPE_KERBEROS_V5 2 +#define AUTHTYPE_SPX 3 +#define AUTHTYPE_MINK 4 +#define AUTHTYPE_SRA 6 +#define AUTHTYPE_CNT 7 + +#define AUTHTYPE_TEST 99 + +#ifdef AUTH_NAMES +const char *authtype_names[] = { + "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", NULL, "SRA", + 0 +}; +#else +extern char *authtype_names[]; +#endif + +#define AUTHTYPE_NAME_OK(x) ((unsigned int)(x) < AUTHTYPE_CNT) +#define AUTHTYPE_NAME(x) authtype_names[x] + +/* + * ENCRYPTion suboptions + */ +#define ENCRYPT_IS 0 /* I pick encryption type ... */ +#define ENCRYPT_SUPPORT 1 /* I support encryption types ... */ +#define ENCRYPT_REPLY 2 /* Initial setup response */ +#define ENCRYPT_START 3 /* Am starting to send encrypted */ +#define ENCRYPT_END 4 /* Am ending encrypted */ +#define ENCRYPT_REQSTART 5 /* Request you start encrypting */ +#define ENCRYPT_REQEND 6 /* Request you end encrypting */ +#define ENCRYPT_ENC_KEYID 7 +#define ENCRYPT_DEC_KEYID 8 +#define ENCRYPT_CNT 9 + +#define ENCTYPE_ANY 0 +#define ENCTYPE_DES_CFB64 1 +#define ENCTYPE_DES_OFB64 2 +#define ENCTYPE_CNT 3 + +#ifdef ENCRYPT_NAMES +const char *encrypt_names[] = { + "IS", "SUPPORT", "REPLY", "START", "END", + "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID", + 0 +}; +const char *enctype_names[] = { + "ANY", "DES_CFB64", "DES_OFB64", + 0 +}; +#else +extern char *encrypt_names[]; +extern char *enctype_names[]; +#endif + + +#define ENCRYPT_NAME_OK(x) ((unsigned int)(x) < ENCRYPT_CNT) +#define ENCRYPT_NAME(x) encrypt_names[x] + +#define ENCTYPE_NAME_OK(x) ((unsigned int)(x) < ENCTYPE_CNT) +#define ENCTYPE_NAME(x) enctype_names[x] + +#endif /* !_TELNET_H_ */