[DEVICE]
Family = M4A5;
PartType = M4A5-128/64;
Package = 100TQFP;
PartNumber = M4A5-128/64-10VC;
Speed = -10;
Operating_condition = COM;
EN_Segment = No;
Pin_MC_1to1 = No;
EN_PinReserve_IO = Yes;
EN_PinReserve_BIDIR = Yes;
Voltage = 5.0;

[REVISION]
RCS = "$Revision: 1.2 $";
Parent = m4a5.lci;
SDS_File = m4a5.sds;
DATE = 02/16/2017;
TIME = 19:15:23;
Source_Format = Pure_VHDL;
Type = TT2;
Pre_Fit_Time = 1;

[IGNORE ASSIGNMENTS]
Pin_Assignments = No;
Pin_Keep_Block = No;
Pin_Keep_Segment = No;
Group_Assignments = No;
Macrocell_Assignments = No;
Macrocell_Keep_Block = No;
Macrocell_Keep_Segment = No;
Pin_Reservation = No;
Block_Reservation = No;
Segment_Reservation = No;
Timing_Constraints = No;

[CLEAR ASSIGNMENTS]
Pin_Assignments = No;
Pin_Keep_Block = No;
Pin_Keep_Segment = No;
Group_Assignments = No;
Macrocell_Assignments = No;
Macrocell_Keep_Block = No;
Macrocell_Keep_Segment = No;
Pin_Reservation = No;
Block_Reservation = No;
Segment_Reservation = No;
Timing_Constraints = No;

[BACKANNOTATE ASSIGNMENTS]
Pin_Block = No;
Pin_Macrocell_Block = No;
Routing = No;

[GLOBAL PROJECT OPTIMIZATION]
Balanced_Partitioning = Yes;
Spread_Placement = Yes;
Max_Pin_Percent = 100;
Max_Macrocell_Percent = 100;
Max_Blk_In_Percent = 100;

[OPTIMIZATION OPTIONS]
Logic_Reduction = Yes;
Max_PTerm_Split = 20;
Max_PTerm_Collapse = 20;
XOR_Synthesis = Yes;
EN_XOR_Synthesis = Yes;
XOR_Gate = Yes;
Node_Collapse = Yes;
Keep_XOR = Yes;
DT_Synthesis = Yes;
Clock_PTerm = Min;
Reset_PTerm = On;
Preset_PTerm = On;
Clock_Enable_PTerm = On;
Output_Enable_PTerm = On;
EN_DT_Synthesis = Yes;
Cluster_PTerm = 5;
FF_inv = No;
EN_Use_CE = No;
Use_CE = No;
Use_Internal_COM_FB = Yes;
EN_use_Internal_COM_FB = Yes;
Set_Reset_Swap = No;
EN_Set_Reset_Swap = No;
Density = No;
DeMorgan = Yes;
T_FF = Yes;
Max_Symbols = 32;

[FITTER GLOBAL OPTIONS]
Run_Time = 0;
Set_Reset_Dont_Care = Yes;
EN_Set_Reset_Dont_Care = Yes;
In_Reg_Optimize = Yes;
EN_In_Reg_Optimize = No;
Clock_Optimize = No;
Global_Clock_As_Pterm = No;
Show_Iterations = No;
Routing_Attempts = 2;
Conf_Unused_IOs = Out_Low;

[HARDWARE DEVICE OPTIONS]
Zero_Hold_Time = Yes;
Signature_Word = 0;
Pull_up = No;
Out_Slew_Rate = SLOW,FAST,57,CLK_DIV_OUT,CLK_EXP,FPU_CS,AMIGA_BUS_DATA_DIR,AMIGA_BUS_ENABLE_LOW,AMIGA_ADDR_ENABLE,AMIGA_BUS_ENABLE_HIGH,AS_030,A_16_,A_17_,A_18_,A_19_,RW,SIZE_1_,SIZE_0_,AVEC,BGACK_030,BG_000,E,IPL_030_0_,IPL_030_1_,IPL_030_2_,LDS_000,UDS_000,VMA,RESET,CIIN,A_20_,A_21_,A_22_,A_24_,A_25_,A_26_,A_27_,A_28_,A_29_,A_30_,A_31_,DS_030,BERR,A0,DSACK1,RW_000,AS_000,A_23_,A1,A_3_,A_2_,AHIGH_24_,AHIGH_25_,AHIGH_26_,AHIGH_27_,AHIGH_28_,AHIGH_29_,AHIGH_30_,AHIGH_31_,A_0_;
Device_max_fanin = 33;
Device_max_pterms = 20;
Usercode_Format = Hex;

[PIN RESERVATIONS]
Layer = OFF;

[LOCATION ASSIGNMENT]
Layer = OFF;
AS_030 = input,82,H,-;
A_16_ = input,96,A,-;
A_17_ = input,59,F,-;
A_18_ = input,95,A,-;
A_19_ = input,97,A,-;
BGACK_000 = input,28,D,-;
BG_030 = input,21,C,-;
CLK_000 = input,11,-,-;
CLK_030 = input,64,-,-;
CLK_OSZI = input,61,-,-;
FC_0_ = input,57,F,-;
FC_1_ = input,58,F,-;
IPL_0_ = input,67,G,-;
IPL_1_ = input,56,F,-;
IPL_2_ = input,68,G,-;
RST = input,86,-,-;
RW = input,71,G,-;
SIZE_1_ = input,79,H,-;
SIZE_0_ = input,70,G,-;
VPA = input,36,-,-;
AVEC = input,92,A,-;
BGACK_030 = input,83,H,-;
BG_000 = input,29,D,-;
CLK_DIV_OUT = input,65,G,-;
CLK_EXP = input,10,B,-;
E = input,66,G,-;
FPU_CS = input,78,H,-;
IPL_030_0_ = input,8,B,-;
IPL_030_1_ = input,7,B,-;
IPL_030_2_ = input,9,B,-;
LDS_000 = input,31,D,-;
UDS_000 = input,32,D,-;
VMA = input,35,D,-;
DTACK = input,30,D,-;
RESET = input,3,B,-;
AMIGA_BUS_DATA_DIR = input,48,E,-;
AMIGA_BUS_ENABLE_LOW = input,20,C,-;
CIIN = input,47,E,-;
A_20_ = input,93,A,-;
A_21_ = input,94,A,-;
A_22_ = input,84,H,-;
A_24_ = input,19,C,-;
A_25_ = input,18,C,-;
A_26_ = input,17,C,-;
A_27_ = input,16,C,-;
A_28_ = input,15,C,-;
A_29_ = input,6,B,-;
A_30_ = input,5,B,-;
A_31_ = input,4,B,-;
DS_030 = input,98,A,-;
BERR = input,41,E,-;
nEXP_SPACE = input,14,-,-;
A0 = input,69,G,-;
DSACK1 = input,81,H,-;
RW_000 = input,80,H,-;
AS_000 = input,42,E,-;
AMIGA_ADDR_ENABLE = input,33,D,-;
AMIGA_BUS_ENABLE_HIGH = input,34,D,-;
A_23_ = input,85,H,-;
FPU_SENSE = input,91,A,-;
A1 = input,60,F,-;
A_3_ = input,44,E,-;
A_2_ = input,43,E,-;
AHIGH_24_ = input,19,C,-;
AHIGH_25_ = input,18,C,-;
AHIGH_26_ = input,17,C,-;
AHIGH_27_ = input,16,C,-;
AHIGH_28_ = input,15,C,-;
AHIGH_29_ = input,6,B,-;
AHIGH_30_ = input,5,B,-;
AHIGH_31_ = input,4,B,-;
A_1_ = input,60,F,-;
A_0_ = input,69,G,-;
A_DECODE_16_ = input,96,A,-;
A_DECODE_17_ = input,59,F,-;
A_DECODE_18_ = input,95,A,-;
A_DECODE_19_ = input,97,A,-;
A_DECODE_20_ = input,93,A,-;
A_DECODE_21_ = input,94,A,-;
A_DECODE_22_ = input,84,H,-;
A_DECODE_23_ = input,85,H,-;

[GROUP ASSIGNMENT]
Layer = OFF;

[SPACE RESERVATIONS]
Layer = OFF;

[BACKANNOTATE NETLIST]
Delay_File = SDF;
Netlist = VHDL;
VCC_GND = Cell;

[FITTER REPORT FORMAT]
Fitter_Options = Yes;
Pinout_Diagram = No;
Pinout_Listing = Yes;
Detailed_Block_Segment_Summary = Yes;
Input_Signal_List = Yes;
Output_Signal_List = Yes;
Bidir_Signal_List = Yes;
Node_Signal_List = Yes;
Signal_Fanout_List = Yes;
Block_Segment_Fanin_List = Yes;
Postfit_Eqn = Yes;
Page_Break = Yes;

[POWER]
Powerlevel =  Low,High;
Default = High;
High = 1,B;
Low = 8,H,G,F,E,D,C,B,A;
Type = GLB;

[SOURCE CONSTRAINT OPTION]
Import_source_constraint = Yes;
Disable_warning_message = No;

[TIMING ANALYZER]
Last_source=;
Last_source_type=Fmax;

[INPUT REGISTERS]