Macintosh-HW/AppleIIeCardYCableReplacementBoard
1
0
Fork 0
mirror of https://github.com/SteveMaves/AppleIIeCardYCableReplacementBoard.git synced 2024-12-26 14:29:30 +00:00
Code Issues Projects Releases Wiki Activity
This Circuit Board Design Allows FloppyEmu and a Joystick to be connected to an Apple IIe Card in a Macintosh
5 Commits 1 Branch 0 Tags 5.7 MiB
9acb154fdf
Go to file
SteveMaves 9acb154fdf
Delete Prototype2.jpg
2020-07-31 22:33:38 -05:00
KiCad Design Add files via upload 2020-07-31 22:28:32 -05:00
Pictures Delete Prototype2.jpg 2020-07-31 22:33:38 -05:00
AdapterCableDesign2.ods Add files via upload 2020-07-31 22:28:32 -05:00
cern_ohl_p_v2_howto.pdf Add files via upload 2020-07-31 22:28:32 -05:00
cern_ohl_p_v2.txt Add files via upload 2020-07-31 22:28:32 -05:00
Changes.txt Add files via upload 2020-07-31 22:28:32 -05:00
README.md Update README.md 2020-07-31 22:22:09 -05:00

README.md

AppleIIeCardYCableReplacementBoard

This Circuit Board Design Allows FloppyEmu and a Joystick to be connected to an Apple IIe Card in a Macintosh

The purpose of this design is to replace the Apple IIe card spliter cable that is a part of the Apple IIe card that fit into some Macintosh computers in the early 90's. The Y-Splitter cable is Apple Part Number 590-0703-A

Note that this circuit board only contains wiring for 5 volts. It is suitable to run the FloppyEmu Floppy Drive Emulator device... https://www.bigmessowires.com/floppy-emu/ but this circuit board will not power an authentic Apple drive which requires 12 volts.