From 6cd33b4040a0c4937c9e14de09ccf66793530752 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Sun, 28 Mar 2021 15:29:43 -0500 Subject: [PATCH] Update link to stlinkv2 firmware updater --- README.adoc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.adoc b/README.adoc index 29d4234..3db4bb5 100644 --- a/README.adoc +++ b/README.adoc @@ -139,7 +139,7 @@ You may also flash the `.bin` file directly from STM32CubeProgrammer. If you are ### Using STLink v2 (prefered) 1. Remove SD Card -2. Make sure the STLink is up to date - https://my.st.com/content/my_st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-link007.license=1610785194992.product=STSW-LINK007.version=2.37.26.html[Latest Firmware] +2. Make sure the STLink is up to date - https://www.st.com/en/development-tools/stsw-link007.html[Latest Firmware] 3. Connect pins `SWDIO`(2), `GND`(4), `SWCLK`(6), and `3.3v`(8) from the programmer to the Blue Pill. NOTE: These are not the same as Serial ports. 4. Run the https://docs.platformio.org/en/latest/integration/ide/vscode.html#project-tasks[PlatformIO: Upload] task. 5. You should see the LED `PC_13` flashing indicating no SD Card detected.