From a13df347a05ca0ac09db6e7a742b8c74c3343637 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Fri, 22 Jan 2021 21:02:59 -0600 Subject: [PATCH] Update README.md --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 82a4e4f..dbec67a 100644 --- a/README.md +++ b/README.md @@ -37,7 +37,7 @@ SE, SE/30, Classic, Classic II, Color Classic, LC I/II/III ### Incompatible -Plus +Plus, PowerPC ## Performance @@ -56,7 +56,7 @@ Tested on a Color Classic with [SCSI Director Pro 4](https://macintoshgarden.org 1. Solder the header pins on to the BluePill. Then the blue pill to the BlueSCSI PCB. - Correct orientation is having the USB should be over the SD Card holder. 1. Solder on the Resistor nets. Pin one is marked on the board and the resistors. -1. SOlder on the Termination Jumpers & place the jupmpers on. +1. Solder on the Termination Jumpers & place the jumpers on. 1. Solder the 50 Pin headers on. 1. Optional - Solder on the berg connector. Only needed if your machine does not supply enough power via the SCSI bus. 1. Optional - Solder on the debug headers near the SD card. Only nessissarry if re-programming.