mirror of
https://github.com/erichelgeson/BlueSCSI.git
synced 2024-09-27 17:56:24 +00:00
1730 lines
50 KiB
C++
1730 lines
50 KiB
C++
/*
|
|
* BlueSCSI
|
|
* Copyright (c) 2021 Eric Helgeson, Androda
|
|
*
|
|
* This file is free software: you may copy, redistribute and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see https://github.com/erichelgeson/bluescsi.
|
|
*
|
|
* This file incorporates work covered by the following copyright and
|
|
* permission notice:
|
|
*
|
|
* Copyright (c) 2019 komatsu
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software
|
|
* for any purpose with or without fee is hereby granted, provided
|
|
* that the above copyright notice and this permission notice appear
|
|
* in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
|
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
|
|
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
|
|
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
|
|
* OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
|
|
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <Arduino.h> // For Platform.IO
|
|
#include <SdFat.h>
|
|
#include <setjmp.h>
|
|
#include "scsi_cmds.h"
|
|
#include "scsi_sense.h"
|
|
#include "scsi_status.h"
|
|
#include "scsi_mode.h"
|
|
|
|
#ifdef USE_STM32_DMA
|
|
#warning "warning USE_STM32_DMA"
|
|
#endif
|
|
|
|
#define DEBUG 0 // 0:No debug information output
|
|
// 1: Debug information output to USB Serial
|
|
// 2: Debug information output to LOG.txt (slow)
|
|
|
|
// SCSI config
|
|
#define NUM_SCSIID 7 // Maximum number of supported SCSI-IDs (The minimum is 0)
|
|
#define NUM_SCSILUN 2 // Maximum number of LUNs supported (The minimum is 0)
|
|
#define READ_PARITY_CHECK 0 // Perform read parity check (unverified)
|
|
|
|
// HDD format
|
|
#define MAX_BLOCKSIZE 2048 // Maximum BLOCK size
|
|
|
|
// SDFAT
|
|
SdFs SD;
|
|
|
|
#if DEBUG == 1
|
|
#define LOG(XX) Serial.print(XX)
|
|
#define LOGHEX(XX) Serial.print(XX, HEX)
|
|
#define LOGN(XX) Serial.println(XX)
|
|
#define LOGHEXN(XX) Serial.println(XX, HEX)
|
|
#elif DEBUG == 2
|
|
#define LOG(XX) LOG_FILE.print(XX); LOG_FILE.sync();
|
|
#define LOGHEX(XX) LOG_FILE.print(XX, HEX); LOG_FILE.sync();
|
|
#define LOGN(XX) LOG_FILE.println(XX); LOG_FILE.sync();
|
|
#define LOGHEXN(XX) LOG_FILE.println(XX, HEX); LOG_FILE.sync();
|
|
#else
|
|
#define LOG(XX) //Serial.print(XX)
|
|
#define LOGHEX(XX) //Serial.print(XX, HEX)
|
|
#define LOGN(XX) //Serial.println(XX)
|
|
#define LOGHEXN(XX) //Serial.println(XX, HEX)
|
|
#endif
|
|
|
|
#define active 1
|
|
#define inactive 0
|
|
#define high 0
|
|
#define low 1
|
|
|
|
#define isHigh(XX) ((XX) == high)
|
|
#define isLow(XX) ((XX) != high)
|
|
|
|
#define gpio_mode(pin,val) gpio_set_mode(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit, val);
|
|
#define gpio_write(pin,val) gpio_write_bit(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit, val)
|
|
#define gpio_read(pin) gpio_read_bit(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit)
|
|
|
|
//#define DB0 PB8 // SCSI:DB0
|
|
//#define DB1 PB9 // SCSI:DB1
|
|
//#define DB2 PB10 // SCSI:DB2
|
|
//#define DB3 PB11 // SCSI:DB3
|
|
//#define DB4 PB12 // SCSI:DB4
|
|
//#define DB5 PB13 // SCSI:DB5
|
|
//#define DB6 PB14 // SCSI:DB6
|
|
//#define DB7 PB15 // SCSI:DB7
|
|
//#define DBP PB0 // SCSI:DBP
|
|
#define ATN PA8 // SCSI:ATN
|
|
#define BSY PA9 // SCSI:BSY
|
|
#define ACK PA10 // SCSI:ACK
|
|
#define RST PA15 // SCSI:RST
|
|
#define MSG PB3 // SCSI:MSG
|
|
#define SEL PB4 // SCSI:SEL
|
|
#define CD PB5 // SCSI:C/D
|
|
#define REQ PB6 // SCSI:REQ
|
|
#define IO PB7 // SCSI:I/O
|
|
#define LED2 PA0 // External LED
|
|
|
|
#define SD_CS PA4 // SDCARD:CS
|
|
#define LED PC13 // LED
|
|
|
|
// Image Set Selector
|
|
#ifdef XCVR
|
|
#define IMAGE_SELECT1 PC14
|
|
#define IMAGE_SELECT2 PC15
|
|
#else
|
|
#define IMAGE_SELECT1 PA1
|
|
#define IMAGE_SELECT2 PB1
|
|
#endif
|
|
|
|
// GPIO register port
|
|
#define PAREG GPIOA->regs
|
|
#define PBREG GPIOB->regs
|
|
|
|
// LED control
|
|
#define LED_ON() gpio_write(LED, high); gpio_write(LED2, low);
|
|
#define LED_OFF() gpio_write(LED, low); gpio_write(LED2, high);
|
|
|
|
// Virtual pin (Arduio compatibility is slow, so make it MCU-dependent)
|
|
#define PA(BIT) (BIT)
|
|
#define PB(BIT) (BIT+16)
|
|
// Virtual pin decoding
|
|
#define GPIOREG(VPIN) ((VPIN)>=16?PBREG:PAREG)
|
|
#define BITMASK(VPIN) (1<<((VPIN)&15))
|
|
|
|
#define vATN PA(8) // SCSI:ATN
|
|
#define vBSY PA(9) // SCSI:BSY
|
|
#define vACK PA(10) // SCSI:ACK
|
|
#define vRST PA(15) // SCSI:RST
|
|
#define vMSG PB(3) // SCSI:MSG
|
|
#define vSEL PB(4) // SCSI:SEL
|
|
#define vCD PB(5) // SCSI:C/D
|
|
#define vREQ PB(6) // SCSI:REQ
|
|
#define vIO PB(7) // SCSI:I/O
|
|
#define vSD_CS PA(4) // SDCARD:CS
|
|
|
|
// SCSI output pin control: opendrain active LOW (direct pin drive)
|
|
#define SCSI_OUT(VPIN,ACTIVE) { GPIOREG(VPIN)->BSRR = BITMASK(VPIN)<<((ACTIVE)?16:0); }
|
|
|
|
// SCSI input pin check (inactive=0,avtive=1)
|
|
#define SCSI_IN(VPIN) ((~GPIOREG(VPIN)->IDR>>(VPIN&15))&1)
|
|
|
|
// SCSI phase change as single write to port B
|
|
#define SCSIPHASEMASK(MSGACTIVE, CDACTIVE, IOACTIVE) ((BITMASK(vMSG)<<((MSGACTIVE)?16:0)) | (BITMASK(vCD)<<((CDACTIVE)?16:0)) | (BITMASK(vIO)<<((IOACTIVE)?16:0)))
|
|
|
|
#define SCSI_PHASE_DATAOUT SCSIPHASEMASK(inactive, inactive, inactive)
|
|
#define SCSI_PHASE_DATAIN SCSIPHASEMASK(inactive, inactive, active)
|
|
#define SCSI_PHASE_COMMAND SCSIPHASEMASK(inactive, active, inactive)
|
|
#define SCSI_PHASE_STATUS SCSIPHASEMASK(inactive, active, active)
|
|
#define SCSI_PHASE_MESSAGEOUT SCSIPHASEMASK(active, active, inactive)
|
|
#define SCSI_PHASE_MESSAGEIN SCSIPHASEMASK(active, active, active)
|
|
|
|
#define SCSI_PHASE_CHANGE(MASK) { PBREG->BSRR = (MASK); }
|
|
|
|
#ifdef XCVR
|
|
#define TR_TARGET PA1 // Target Transceiver Control Pin
|
|
#define TR_DBP PA2 // Data Pins Transceiver Control Pin
|
|
#define TR_INITIATOR PA3 // Initiator Transciever Control Pin
|
|
|
|
#define vTR_TARGET PA(1) // Target Transceiver Control Pin
|
|
#define vTR_DBP PA(2) // Data Pins Transceiver Control Pin
|
|
#define vTR_INITIATOR PA(3) // Initiator Transciever Control Pin
|
|
|
|
#define TR_INPUT 1
|
|
#define TR_OUTPUT 0
|
|
|
|
// Transceiver control definitions
|
|
#define TRANSCEIVER_IO_SET(VPIN,TR_INPUT) { GPIOREG(VPIN)->BSRR = BITMASK(VPIN) << ((TR_INPUT) ? 16 : 0); }
|
|
|
|
// Turn on the output only for BSY
|
|
#define SCSI_BSY_ACTIVE() { gpio_mode(BSY, GPIO_OUTPUT_PP); SCSI_OUT(vBSY, active) }
|
|
|
|
#define SCSI_TARGET_ACTIVE() { gpio_mode(REQ, GPIO_OUTPUT_PP); gpio_mode(MSG, GPIO_OUTPUT_PP); gpio_mode(CD, GPIO_OUTPUT_PP); gpio_mode(IO, GPIO_OUTPUT_PP); gpio_mode(BSY, GPIO_OUTPUT_PP); TRANSCEIVER_IO_SET(vTR_TARGET,TR_OUTPUT);}
|
|
// BSY,REQ,MSG,CD,IO Turn off output, BSY is the last input
|
|
#define SCSI_TARGET_INACTIVE() { pinMode(REQ, INPUT); pinMode(MSG, INPUT); pinMode(CD, INPUT); pinMode(IO, INPUT); pinMode(BSY, INPUT); TRANSCEIVER_IO_SET(vTR_TARGET,TR_INPUT); }
|
|
|
|
#define DB_MODE_OUT 1 // push-pull mode
|
|
#define DB_MODE_IN 4 // floating inputs
|
|
|
|
#else
|
|
|
|
// GPIO mode
|
|
// IN , FLOAT : 4
|
|
// IN , PU/PD : 8
|
|
// OUT, PUSH/PULL : 3
|
|
// OUT, OD : 7
|
|
#define DB_MODE_OUT 3
|
|
//#define DB_MODE_OUT 7
|
|
#define DB_MODE_IN 8
|
|
|
|
// Turn on the output only for BSY
|
|
#define SCSI_BSY_ACTIVE() { gpio_mode(BSY, GPIO_OUTPUT_OD); SCSI_OUT(vBSY, active) }
|
|
// BSY,REQ,MSG,CD,IO Turn on the output (no change required for OD)
|
|
#define SCSI_TARGET_ACTIVE() { if (DB_MODE_OUT != 7) gpio_mode(REQ, GPIO_OUTPUT_PP);}
|
|
// BSY,REQ,MSG,CD,IO Turn off output, BSY is the last input
|
|
#define SCSI_TARGET_INACTIVE() { if (DB_MODE_OUT == 7) SCSI_OUT(vREQ,inactive) else { if (DB_MODE_IN == 8) gpio_mode(REQ, GPIO_INPUT_PU) else gpio_mode(REQ, GPIO_INPUT_FLOATING)} SCSI_PHASE_CHANGE(SCSI_PHASE_DATAOUT); gpio_mode(BSY, GPIO_INPUT_PU); }
|
|
|
|
#endif
|
|
|
|
|
|
// Put DB and DP in output mode
|
|
#define SCSI_DB_OUTPUT() { PBREG->CRL=(PBREG->CRL &0xfffffff0)|DB_MODE_OUT; PBREG->CRH = 0x11111111*DB_MODE_OUT; }
|
|
// Put DB and DP in input mode
|
|
#define SCSI_DB_INPUT() { PBREG->CRL=(PBREG->CRL &0xfffffff0)|DB_MODE_IN ; PBREG->CRH = 0x11111111*DB_MODE_IN; }
|
|
|
|
// HDDiamge file
|
|
#define HDIMG_ID_POS 2 // Position to embed ID number
|
|
#define HDIMG_LUN_POS 3 // Position to embed LUN numbers
|
|
#define HDIMG_BLK_POS 5 // Position to embed block size numbers
|
|
#define MAX_FILE_PATH 32 // Maximum file name length
|
|
|
|
// HDD image
|
|
typedef struct hddimg_struct
|
|
{
|
|
FsFile m_file; // File object
|
|
uint64_t m_fileSize; // File size
|
|
size_t m_blocksize; // SCSI BLOCK size
|
|
}HDDIMG;
|
|
HDDIMG img[NUM_SCSIID][NUM_SCSILUN]; // Maximum number
|
|
|
|
uint8_t m_senseKey = 0; // Sense key
|
|
uint16_t m_addition_sense = 0; // Additional sense information
|
|
volatile bool m_isBusReset = false; // Bus reset
|
|
volatile bool m_resetJmp = false; // Call longjmp on reset
|
|
jmp_buf m_resetJmpBuf;
|
|
|
|
byte scsi_id_mask; // Mask list of responding SCSI IDs
|
|
byte m_id; // Currently responding SCSI-ID
|
|
byte m_lun; // Logical unit number currently responding
|
|
byte m_sts; // Status byte
|
|
byte m_msg; // Message bytes
|
|
HDDIMG *m_img; // HDD image for current SCSI-ID, LUN
|
|
byte m_buf[MAX_BLOCKSIZE]; // General purpose buffer
|
|
byte m_scsi_buf[512]; // Buffer for SCSI READ/WRITE Buffer
|
|
byte m_msb[256]; // Command storage bytes
|
|
|
|
/*
|
|
* Data byte to BSRR register setting value and parity table
|
|
*/
|
|
|
|
// Parity bit generation
|
|
#define PTY(V) (1^((V)^((V)>>1)^((V)>>2)^((V)>>3)^((V)>>4)^((V)>>5)^((V)>>6)^((V)>>7))&1)
|
|
|
|
// Data byte to BSRR register setting value conversion table
|
|
// BSRR[31:24] = DB[7:0]
|
|
// BSRR[ 16] = PTY(DB)
|
|
// BSRR[15: 8] = ~DB[7:0]
|
|
// BSRR[ 0] = ~PTY(DB)
|
|
|
|
// Set DBP, set REQ = inactive
|
|
#define DBP(D) ((((((uint32_t)(D)<<8)|PTY(D))*0x00010001)^0x0000ff01)|BITMASK(vREQ))
|
|
|
|
// BSRR register control value that simultaneously performs DB set, DP set, and REQ = H (inactrive)
|
|
uint32_t db_bsrr[256];
|
|
|
|
// Parity bit acquisition
|
|
#define PARITY(DB) (db_bsrr[DB]&1)
|
|
|
|
// Macro cleaning
|
|
#undef DBP32
|
|
#undef DBP8
|
|
//#undef DBP
|
|
//#undef PTY
|
|
|
|
// Log File
|
|
#define VERSION "1.1-SNAPSHOT-20220522"
|
|
#define LOG_FILENAME "LOG.txt"
|
|
FsFile LOG_FILE;
|
|
|
|
// SCSI Drive Vendor information
|
|
byte SCSI_INFO_BUF[36] = {
|
|
0x00, //device type
|
|
0x00, //RMB = 0
|
|
0x01, //ISO, ECMA, ANSI version
|
|
0x01, //Response data format
|
|
35 - 4, //Additional data length
|
|
0, 0, //Reserve
|
|
0x00, //Support function
|
|
'Q', 'U', 'A', 'N', 'T', 'U', 'M', ' ', // vendor 8
|
|
'F', 'I', 'R', 'E', 'B', 'A', 'L', 'L', '1', ' ', ' ',' ', ' ', ' ', ' ', ' ', // product 16
|
|
'1', '.', '0', ' ' // version 4
|
|
};
|
|
|
|
void onFalseInit(void);
|
|
void noSDCardFound(void);
|
|
void onBusReset(void);
|
|
void initFileLog(int);
|
|
void finalizeFileLog(void);
|
|
void findDriveImages(FsFile root);
|
|
|
|
/*
|
|
* IO read.
|
|
*/
|
|
inline byte readIO(void)
|
|
{
|
|
// Port input data register
|
|
uint32_t ret = GPIOB->regs->IDR;
|
|
byte bret = (byte)(~(ret>>8));
|
|
#if READ_PARITY_CHECK
|
|
if((db_bsrr[bret]^ret)&1)
|
|
m_sts |= 0x01; // parity error
|
|
#endif
|
|
|
|
return bret;
|
|
}
|
|
|
|
// If config file exists, read the first three lines and copy the contents.
|
|
// File must be well formed or you will get junk in the SCSI Vendor fields.
|
|
void readSCSIDeviceConfig() {
|
|
FsFile config_file = SD.open("scsi-config.txt", O_RDONLY);
|
|
if (!config_file.isOpen()) {
|
|
return;
|
|
}
|
|
char vendor[9];
|
|
memset(vendor, 0, sizeof(vendor));
|
|
config_file.readBytes(vendor, sizeof(vendor));
|
|
LOG_FILE.print("SCSI VENDOR: ");
|
|
LOG_FILE.println(vendor);
|
|
memcpy(&(SCSI_INFO_BUF[8]), vendor, 8);
|
|
|
|
char product[17];
|
|
memset(product, 0, sizeof(product));
|
|
config_file.readBytes(product, sizeof(product));
|
|
LOG_FILE.print("SCSI PRODUCT: ");
|
|
LOG_FILE.println(product);
|
|
memcpy(&(SCSI_INFO_BUF[16]), product, 16);
|
|
|
|
char version[5];
|
|
memset(version, 0, sizeof(version));
|
|
config_file.readBytes(version, sizeof(version));
|
|
LOG_FILE.print("SCSI VERSION: ");
|
|
LOG_FILE.println(version);
|
|
memcpy(&(SCSI_INFO_BUF[32]), version, 4);
|
|
config_file.close();
|
|
}
|
|
|
|
// read SD information and print to logfile
|
|
void readSDCardInfo()
|
|
{
|
|
cid_t sd_cid;
|
|
|
|
if(SD.card()->readCID(&sd_cid))
|
|
{
|
|
LOG_FILE.print("Sd MID:");
|
|
LOG_FILE.print(sd_cid.mid, 16);
|
|
LOG_FILE.print(" OID:");
|
|
LOG_FILE.print(sd_cid.oid[0]);
|
|
LOG_FILE.println(sd_cid.oid[1]);
|
|
|
|
LOG_FILE.print("Sd Name:");
|
|
LOG_FILE.print(sd_cid.pnm[0]);
|
|
LOG_FILE.print(sd_cid.pnm[1]);
|
|
LOG_FILE.print(sd_cid.pnm[2]);
|
|
LOG_FILE.print(sd_cid.pnm[3]);
|
|
LOG_FILE.println(sd_cid.pnm[4]);
|
|
|
|
LOG_FILE.print("Sd Date:");
|
|
LOG_FILE.print(sd_cid.mdt_month);
|
|
LOG_FILE.print("/20"); // CID year is 2000 + high/low
|
|
LOG_FILE.print(sd_cid.mdt_year_high);
|
|
LOG_FILE.println(sd_cid.mdt_year_low);
|
|
|
|
LOG_FILE.print("Sd Serial:");
|
|
LOG_FILE.println(sd_cid.psn);
|
|
LOG_FILE.sync();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Open HDD image file
|
|
*/
|
|
|
|
bool hddimageOpen(HDDIMG *h, FsFile file,int id,int lun,int blocksize)
|
|
{
|
|
h->m_fileSize = 0;
|
|
h->m_blocksize = blocksize;
|
|
h->m_file = file;
|
|
if(h->m_file.isOpen())
|
|
{
|
|
h->m_fileSize = h->m_file.size();
|
|
if(h->m_fileSize>0)
|
|
{
|
|
// check blocksize dummy file
|
|
LOG_FILE.print(" / ");
|
|
LOG_FILE.print(h->m_fileSize);
|
|
LOG_FILE.print("bytes / ");
|
|
LOG_FILE.print(h->m_fileSize / 1024);
|
|
LOG_FILE.print("KiB / ");
|
|
LOG_FILE.print(h->m_fileSize / 1024 / 1024);
|
|
LOG_FILE.println("MiB");
|
|
return true; // File opened
|
|
}
|
|
else
|
|
{
|
|
LOG_FILE.println(" - file is 0 bytes, can not use.");
|
|
h->m_file.close();
|
|
h->m_fileSize = h->m_blocksize = 0; // no file
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Initialization.
|
|
* Initialize the bus and set the PIN orientation
|
|
*/
|
|
void setup()
|
|
{
|
|
// PA15 / PB3 / PB4 Cannot be used
|
|
// JTAG Because it is used for debugging.
|
|
disableDebugPorts();
|
|
|
|
// Setup BSRR table
|
|
for (unsigned i = 0; i <= 255; i++) {
|
|
db_bsrr[i] = DBP(i);
|
|
}
|
|
|
|
// Serial initialization
|
|
#if DEBUG > 0
|
|
Serial.begin(9600);
|
|
// If using a USB->TTL monitor instead of USB serial monitor - you can uncomment this.
|
|
//while (!Serial);
|
|
#endif
|
|
|
|
// PIN initialization
|
|
gpio_mode(LED2, GPIO_OUTPUT_PP);
|
|
gpio_mode(LED, GPIO_OUTPUT_OD);
|
|
|
|
// Image Set Select Init
|
|
gpio_mode(IMAGE_SELECT1, GPIO_INPUT_PU);
|
|
gpio_mode(IMAGE_SELECT2, GPIO_INPUT_PU);
|
|
pinMode(IMAGE_SELECT1, INPUT);
|
|
pinMode(IMAGE_SELECT2, INPUT);
|
|
int image_file_set = ((digitalRead(IMAGE_SELECT1) == LOW) ? 1 : 0) | ((digitalRead(IMAGE_SELECT2) == LOW) ? 2 : 0);
|
|
|
|
LED_OFF();
|
|
|
|
#ifdef XCVR
|
|
// Transceiver Pin Initialization
|
|
pinMode(TR_TARGET, OUTPUT);
|
|
pinMode(TR_INITIATOR, OUTPUT);
|
|
pinMode(TR_DBP, OUTPUT);
|
|
|
|
TRANSCEIVER_IO_SET(vTR_INITIATOR,TR_INPUT);
|
|
#endif
|
|
|
|
//GPIO(SCSI BUS)Initialization
|
|
//Port setting register (lower)
|
|
// GPIOB->regs->CRL |= 0x000000008; // SET INPUT W/ PUPD on PAB-PB0
|
|
//Port setting register (upper)
|
|
//GPIOB->regs->CRH = 0x88888888; // SET INPUT W/ PUPD on PB15-PB8
|
|
// GPIOB->regs->ODR = 0x0000FF00; // SET PULL-UPs on PB15-PB8
|
|
// DB and DP are input modes
|
|
SCSI_DB_INPUT()
|
|
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_INPUT);
|
|
|
|
// Initiator port
|
|
pinMode(ATN, INPUT);
|
|
pinMode(BSY, INPUT);
|
|
pinMode(ACK, INPUT);
|
|
pinMode(RST, INPUT);
|
|
pinMode(SEL, INPUT);
|
|
TRANSCEIVER_IO_SET(vTR_INITIATOR,TR_INPUT);
|
|
|
|
// Target port
|
|
pinMode(MSG, INPUT);
|
|
pinMode(CD, INPUT);
|
|
pinMode(REQ, INPUT);
|
|
pinMode(IO, INPUT);
|
|
TRANSCEIVER_IO_SET(vTR_TARGET,TR_INPUT);
|
|
#else
|
|
// Input port
|
|
gpio_mode(ATN, GPIO_INPUT_PU);
|
|
gpio_mode(BSY, GPIO_INPUT_PU);
|
|
gpio_mode(ACK, GPIO_INPUT_PU);
|
|
gpio_mode(RST, GPIO_INPUT_PU);
|
|
gpio_mode(SEL, GPIO_INPUT_PU);
|
|
// Output port
|
|
gpio_mode(MSG, GPIO_OUTPUT_OD);
|
|
gpio_mode(CD, GPIO_OUTPUT_OD);
|
|
gpio_mode(REQ, GPIO_OUTPUT_OD);
|
|
gpio_mode(IO, GPIO_OUTPUT_OD);
|
|
// Turn off the output port
|
|
SCSI_TARGET_INACTIVE()
|
|
#endif
|
|
|
|
//Occurs when the RST pin state changes from HIGH to LOW
|
|
//attachInterrupt(RST, onBusReset, FALLING);
|
|
|
|
// Try different clock speeds till we find one that is stable.
|
|
LED_ON();
|
|
int mhz = 50;
|
|
bool sd_ready = false;
|
|
while (mhz >= 32 && !sd_ready) {
|
|
if(SD.begin(SdSpiConfig(PA4, DEDICATED_SPI, SD_SCK_MHZ(mhz), &SPI))) {
|
|
sd_ready = true;
|
|
}
|
|
else {
|
|
mhz--;
|
|
}
|
|
}
|
|
LED_OFF();
|
|
|
|
if(!sd_ready) {
|
|
#if DEBUG > 0
|
|
Serial.println("SD initialization failed!");
|
|
#endif
|
|
noSDCardFound();
|
|
}
|
|
initFileLog(mhz);
|
|
readSCSIDeviceConfig();
|
|
readSDCardInfo();
|
|
|
|
//HD image file open
|
|
scsi_id_mask = 0x00;
|
|
|
|
// Iterate over the root path in the SD card looking for candidate image files.
|
|
FsFile root;
|
|
|
|
char image_set_dir_name[] = "/ImageSetX/";
|
|
image_set_dir_name[9] = char(image_file_set) + 0x30;
|
|
root.open(image_set_dir_name);
|
|
if (root.isDirectory()) {
|
|
LOG_FILE.print("Looking for images in: ");
|
|
LOG_FILE.println(image_set_dir_name);
|
|
LOG_FILE.sync();
|
|
} else {
|
|
root.close();
|
|
root.open("/");
|
|
}
|
|
|
|
findDriveImages(root);
|
|
root.close();
|
|
|
|
FsFile images_all_dir;
|
|
images_all_dir.open("/ImageSetAll/");
|
|
if (images_all_dir.isDirectory()) {
|
|
LOG_FILE.println("Looking for images in: /ImageSetAll/");
|
|
LOG_FILE.sync();
|
|
findDriveImages(images_all_dir);
|
|
}
|
|
images_all_dir.close();
|
|
|
|
// Error if there are 0 image files
|
|
if(scsi_id_mask==0) {
|
|
LOG_FILE.println("ERROR: No valid images found!");
|
|
onFalseInit();
|
|
}
|
|
|
|
finalizeFileLog();
|
|
LED_OFF();
|
|
//Occurs when the RST pin state changes from HIGH to LOW
|
|
attachInterrupt(RST, onBusReset, FALLING);
|
|
}
|
|
|
|
void findDriveImages(FsFile root) {
|
|
bool image_ready;
|
|
FsFile file;
|
|
char path_name[MAX_FILE_PATH+1];
|
|
root.getName(path_name, sizeof(path_name));
|
|
SD.chdir(path_name);
|
|
|
|
while (1) {
|
|
// Directories can not be opened RDWR, so it will fail, but fails the same way with no file/dir, so we need to peek at the file first.
|
|
FsFile file_test = root.openNextFile(O_RDONLY);
|
|
char name[MAX_FILE_PATH+1];
|
|
file_test.getName(name, MAX_FILE_PATH+1);
|
|
|
|
// Skip directories and already open files.
|
|
if(file_test.isDir() || strncmp(name, "LOG.txt", 7) == 0) {
|
|
file_test.close();
|
|
continue;
|
|
}
|
|
// If error there is no next file to open.
|
|
if(file_test.getError() > 0) {
|
|
file_test.close();
|
|
break;
|
|
}
|
|
// Valid file, open for reading/writing.
|
|
file = SD.open(name, O_RDWR);
|
|
if(file && file.isFile()) {
|
|
if(tolower(name[0]) == 'h' && tolower(name[1]) == 'd') {
|
|
// Defaults for Hard Disks
|
|
int id = 1; // 0 and 3 are common in Macs for physical HD and CD, so avoid them.
|
|
int lun = 0;
|
|
int blk = 512;
|
|
|
|
// Positionally read in and coerase the chars to integers.
|
|
// We only require the minimum and read in the next if provided.
|
|
int file_name_length = strlen(name);
|
|
if(file_name_length > 2) { // HD[N]
|
|
int tmp_id = name[HDIMG_ID_POS] - '0';
|
|
|
|
// If valid id, set it, else use default
|
|
if(tmp_id > -1 && tmp_id < 8) {
|
|
id = tmp_id;
|
|
} else {
|
|
LOG_FILE.print(name);
|
|
LOG_FILE.println(" - bad SCSI id in filename, Using default ID 1");
|
|
}
|
|
}
|
|
|
|
if(file_name_length > 3) { // HDN[N]
|
|
int tmp_lun = name[HDIMG_LUN_POS] - '0';
|
|
|
|
// If valid lun, set it, else use default
|
|
if(tmp_lun == 0 || tmp_lun == 1) {
|
|
lun = tmp_lun;
|
|
} else {
|
|
LOG_FILE.print(name);
|
|
LOG_FILE.println(" - bad SCSI LUN in filename, Using default LUN ID 0");
|
|
}
|
|
}
|
|
|
|
int blk1 = 0, blk2, blk3, blk4 = 0;
|
|
if(file_name_length > 8) { // HD00_[111]
|
|
blk1 = name[HDIMG_BLK_POS] - '0';
|
|
blk2 = name[HDIMG_BLK_POS+1] - '0';
|
|
blk3 = name[HDIMG_BLK_POS+2] - '0';
|
|
if(file_name_length > 9) // HD00_NNN[1]
|
|
blk4 = name[HDIMG_BLK_POS+3] - '0';
|
|
}
|
|
if(blk1 == 2 && blk2 == 5 && blk3 == 6) {
|
|
blk = 256;
|
|
} else if(blk1 == 1 && blk2 == 0 && blk3 == 2 && blk4 == 4) {
|
|
blk = 1024;
|
|
} else if(blk1 == 2 && blk2 == 0 && blk3 == 4 && blk4 == 8) {
|
|
blk = 2048;
|
|
}
|
|
|
|
if(id < NUM_SCSIID && lun < NUM_SCSILUN) {
|
|
HDDIMG *h = &img[id][lun];
|
|
LOG_FILE.print(" - ");
|
|
LOG_FILE.print(name);
|
|
image_ready = hddimageOpen(h, file, id, lun, blk);
|
|
if(image_ready) { // Marked as a responsive ID
|
|
scsi_id_mask |= 1<<id;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
file.close();
|
|
LOG_FILE.print("Not an image: ");
|
|
LOG_FILE.println(name);
|
|
}
|
|
LOG_FILE.sync();
|
|
}
|
|
// cd .. before going back.
|
|
SD.chdir("/");
|
|
}
|
|
|
|
/*
|
|
* Setup initialization logfile
|
|
*/
|
|
void initFileLog(int success_mhz) {
|
|
LOG_FILE = SD.open(LOG_FILENAME, O_WRONLY | O_CREAT | O_TRUNC);
|
|
LOG_FILE.println("BlueSCSI <-> SD - https://github.com/erichelgeson/BlueSCSI");
|
|
LOG_FILE.print("VERSION: ");
|
|
LOG_FILE.print(VERSION);
|
|
LOG_FILE.println(BUILD_TAGS);
|
|
LOG_FILE.print("DEBUG:");
|
|
LOG_FILE.print(DEBUG);
|
|
LOG_FILE.print(" SDFAT_FILE_TYPE:");
|
|
LOG_FILE.println(SDFAT_FILE_TYPE);
|
|
LOG_FILE.print("SdFat version: ");
|
|
LOG_FILE.println(SD_FAT_VERSION_STR);
|
|
LOG_FILE.print("Sd Format: ");
|
|
switch(SD.vol()->fatType()) {
|
|
case FAT_TYPE_EXFAT:
|
|
LOG_FILE.println("exFAT");
|
|
break;
|
|
case FAT_TYPE_FAT32:
|
|
LOG_FILE.print("FAT32");
|
|
case FAT_TYPE_FAT16:
|
|
LOG_FILE.print("FAT16");
|
|
default:
|
|
LOG_FILE.println(" - Consider formatting the SD Card with exFAT for improved performance.");
|
|
}
|
|
LOG_FILE.print("SPI speed: ");
|
|
LOG_FILE.print(success_mhz);
|
|
LOG_FILE.println("Mhz");
|
|
if(success_mhz < 40) {
|
|
LOG_FILE.println("SPI under 40Mhz - read https://github.com/erichelgeson/BlueSCSI/wiki/Slow-SPI");
|
|
}
|
|
LOG_FILE.print("SdFat Max FileName Length: ");
|
|
LOG_FILE.println(MAX_FILE_PATH);
|
|
LOG_FILE.println("Initialized SD Card - lets go!");
|
|
LOG_FILE.sync();
|
|
}
|
|
|
|
/*
|
|
* Finalize initialization logfile
|
|
*/
|
|
void finalizeFileLog() {
|
|
// View support drive map
|
|
LOG_FILE.print("ID");
|
|
for(int lun=0;lun<NUM_SCSILUN;lun++)
|
|
{
|
|
LOG_FILE.print(":LUN");
|
|
LOG_FILE.print(lun);
|
|
}
|
|
LOG_FILE.println(":");
|
|
//
|
|
for(int id=0;id<NUM_SCSIID;id++)
|
|
{
|
|
LOG_FILE.print(" ");
|
|
LOG_FILE.print(id);
|
|
for(int lun=0;lun<NUM_SCSILUN;lun++)
|
|
{
|
|
HDDIMG *h = &img[id][lun];
|
|
if( (lun<NUM_SCSILUN) && (h->m_file))
|
|
{
|
|
LOG_FILE.print((h->m_blocksize<1000) ? ": " : ":");
|
|
LOG_FILE.print(h->m_blocksize);
|
|
}
|
|
else
|
|
LOG_FILE.print(":----");
|
|
}
|
|
LOG_FILE.println(":");
|
|
}
|
|
LOG_FILE.println("Finished initialization of SCSI Devices - Entering main loop.");
|
|
LOG_FILE.sync();
|
|
#if DEBUG < 2
|
|
LOG_FILE.close();
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Initialization failed, blink 3x fast
|
|
*/
|
|
void onFalseInit(void)
|
|
{
|
|
LOG_FILE.sync();
|
|
while(true) {
|
|
for(int i = 0; i < 3; i++) {
|
|
LED_ON();
|
|
delay(250);
|
|
LED_OFF();
|
|
delay(250);
|
|
}
|
|
delay(3000);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* No SC Card found, blink 5x fast
|
|
*/
|
|
void noSDCardFound(void)
|
|
{
|
|
while(true) {
|
|
for(int i = 0; i < 5; i++) {
|
|
LED_ON();
|
|
delay(250);
|
|
LED_OFF();
|
|
delay(250);
|
|
}
|
|
delay(3000);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Return from exception and call longjmp
|
|
*/
|
|
void __attribute__ ((noinline)) longjmpFromInterrupt(jmp_buf jmpb, int retval) __attribute__ ((noreturn));
|
|
void longjmpFromInterrupt(jmp_buf jmpb, int retval) {
|
|
// Address of longjmp with the thumb bit cleared
|
|
const uint32_t longjmpaddr = ((uint32_t)longjmp) & 0xfffffffe;
|
|
const uint32_t zero = 0;
|
|
// Default PSR value, function calls don't require any particular value
|
|
const uint32_t PSR = 0x01000000;
|
|
// For documentation on what this is doing, see:
|
|
// https://developer.arm.com/documentation/dui0552/a/the-cortex-m3-processor/exception-model/exception-entry-and-return
|
|
// Stack frame needs to have R0-R3, R12, LR, PC, PSR (from bottom to top)
|
|
// This is being set up to have R0 and R1 contain the parameters passed to longjmp, and PC is the address of the longjmp function.
|
|
// This is using existing stack space, rather than allocating more, as longjmp is just going to unroll the stack even further.
|
|
// 0xfffffff9 is the EXC_RETURN value to return to thread mode.
|
|
asm (
|
|
"str %0, [sp];\
|
|
str %1, [sp, #4];\
|
|
str %2, [sp, #8];\
|
|
str %2, [sp, #12];\
|
|
str %2, [sp, #16];\
|
|
str %2, [sp, #20];\
|
|
str %3, [sp, #24];\
|
|
str %4, [sp, #28];\
|
|
ldr lr, =0xfffffff9;\
|
|
bx lr"
|
|
:: "r"(jmpb),"r"(retval),"r"(zero), "r"(longjmpaddr), "r"(PSR)
|
|
);
|
|
}
|
|
|
|
/*
|
|
* Bus reset interrupt.
|
|
*/
|
|
void onBusReset(void)
|
|
{
|
|
if(isHigh(gpio_read(RST))) {
|
|
delayMicroseconds(20);
|
|
if(isHigh(gpio_read(RST))) {
|
|
// BUS FREE is done in the main process
|
|
// gpio_mode(MSG, GPIO_OUTPUT_OD);
|
|
// gpio_mode(CD, GPIO_OUTPUT_OD);
|
|
// gpio_mode(REQ, GPIO_OUTPUT_OD);
|
|
// gpio_mode(IO, GPIO_OUTPUT_OD);
|
|
// Should I enter DB and DBP once?
|
|
SCSI_DB_INPUT()
|
|
|
|
LOGN("BusReset!");
|
|
if (m_resetJmp) {
|
|
m_resetJmp = false;
|
|
// Jumping out of the interrupt handler, so need to clear the interupt source.
|
|
uint8 exti = PIN_MAP[RST].gpio_bit;
|
|
EXTI_BASE->PR = (1U << exti);
|
|
longjmpFromInterrupt(m_resetJmpBuf, 1);
|
|
} else {
|
|
m_isBusReset = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Enable the reset longjmp, and check if reset fired while it was disabled.
|
|
*/
|
|
void enableResetJmp(void) {
|
|
m_resetJmp = true;
|
|
if (m_isBusReset) {
|
|
longjmp(m_resetJmpBuf, 1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read by handshake.
|
|
*/
|
|
inline byte readHandshake(void)
|
|
{
|
|
SCSI_OUT(vREQ,active)
|
|
//SCSI_DB_INPUT()
|
|
while( ! SCSI_IN(vACK));
|
|
byte r = readIO();
|
|
SCSI_OUT(vREQ,inactive)
|
|
while( SCSI_IN(vACK));
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Write with a handshake.
|
|
*/
|
|
inline void writeHandshake(byte d)
|
|
{
|
|
// This has a 400ns bus settle delay built in. Not optimal for multi-byte transfers.
|
|
GPIOB->regs->BSRR = db_bsrr[d]; // setup DB,DBP (160ns)
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_OUTPUT)
|
|
#endif
|
|
SCSI_DB_OUTPUT() // (180ns)
|
|
// ACK.Fall to DB output delay 100ns(MAX) (DTC-510B)
|
|
SCSI_OUT(vREQ,inactive) // setup wait (30ns)
|
|
SCSI_OUT(vREQ,inactive) // setup wait (30ns)
|
|
SCSI_OUT(vREQ,inactive) // setup wait (30ns)
|
|
SCSI_OUT(vREQ,active) // (30ns)
|
|
//while(!SCSI_IN(vACK)) { if(m_isBusReset){ SCSI_DB_INPUT() return; }}
|
|
while(!SCSI_IN(vACK));
|
|
// ACK.Fall to REQ.Raise delay 500ns(typ.) (DTC-510B)
|
|
GPIOB->regs->BSRR = DBP(0xff); // DB=0xFF , SCSI_OUT(vREQ,inactive)
|
|
// REQ.Raise to DB hold time 0ns
|
|
SCSI_DB_INPUT() // (150ns)
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_INPUT)
|
|
#endif
|
|
while( SCSI_IN(vACK));
|
|
}
|
|
|
|
#pragma GCC push_options
|
|
#pragma GCC optimize ("-Os")
|
|
/*
|
|
* This loop is tuned to repeat the following pattern:
|
|
* 1) Set REQ
|
|
* 2) 5 cycles of work/delay
|
|
* 3) Wait for ACK
|
|
* Cycle time tunings are for 72MHz STM32F103
|
|
* Alignment matters. For the 3 instruction wait loops,it looks like crossing
|
|
* an 8 byte prefetch buffer can add 2 cycles of wait every branch taken.
|
|
*/
|
|
void writeDataLoop(uint32_t blocksize, const byte* srcptr) __attribute__ ((aligned(8)));
|
|
void writeDataLoop(uint32_t blocksize, const byte* srcptr)
|
|
{
|
|
#define REQ_ON() (port_b->BRR = req_bit);
|
|
#define FETCH_BSRR_DB() (bsrr_val = bsrr_tbl[*srcptr++])
|
|
#define REQ_OFF_DB_SET(BSRR_VAL) port_b->BSRR = BSRR_VAL;
|
|
#define WAIT_ACK_ACTIVE() while((*port_a_idr>>(vACK&15)&1))
|
|
#define WAIT_ACK_INACTIVE() while(!(*port_a_idr>>(vACK&15)&1))
|
|
|
|
register const byte *endptr= srcptr + blocksize; // End pointer
|
|
|
|
register const uint32_t *bsrr_tbl = db_bsrr; // Table to convert to BSRR
|
|
register uint32_t bsrr_val; // BSRR value to output (DB, DBP, REQ = ACTIVE)
|
|
|
|
register uint32_t req_bit = BITMASK(vREQ);
|
|
register gpio_reg_map *port_b = PBREG;
|
|
register volatile uint32_t *port_a_idr = &(GPIOA->regs->IDR);
|
|
|
|
// Start the first bus cycle.
|
|
FETCH_BSRR_DB();
|
|
REQ_OFF_DB_SET(bsrr_val);
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_OUTPUT)
|
|
#endif
|
|
REQ_ON();
|
|
FETCH_BSRR_DB();
|
|
WAIT_ACK_ACTIVE();
|
|
REQ_OFF_DB_SET(bsrr_val);
|
|
// Align the starts of the do/while and WAIT loops to an 8 byte prefetch.
|
|
asm("nop.w;nop");
|
|
do{
|
|
WAIT_ACK_INACTIVE();
|
|
REQ_ON();
|
|
// 4 cycles of work
|
|
FETCH_BSRR_DB();
|
|
// Extra 1 cycle delay while keeping the loop within an 8 byte prefetch.
|
|
asm("nop");
|
|
WAIT_ACK_ACTIVE();
|
|
REQ_OFF_DB_SET(bsrr_val);
|
|
// Extra 1 cycle delay, plus 4 cycles for the branch taken with prefetch.
|
|
asm("nop");
|
|
}while(srcptr < endptr);
|
|
WAIT_ACK_INACTIVE();
|
|
// Finish the last bus cycle, byte is already on DB.
|
|
REQ_ON();
|
|
WAIT_ACK_ACTIVE();
|
|
REQ_OFF_DB_SET(bsrr_val);
|
|
WAIT_ACK_INACTIVE();
|
|
}
|
|
#pragma GCC pop_options
|
|
|
|
/*
|
|
* Data in phase.
|
|
* Send len bytes of data array p.
|
|
*/
|
|
void writeDataPhase(int len, const byte* p)
|
|
{
|
|
LOGN("DATAIN PHASE");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_DATAIN);
|
|
// Bus settle delay 400ns. Following code was measured at 800ns before REQ asserted. STM32F103.
|
|
SCSI_DB_OUTPUT()
|
|
writeDataLoop(len, p);
|
|
SCSI_DB_INPUT()
|
|
}
|
|
|
|
/*
|
|
* Data in phase.
|
|
* Send len block while reading from SD card.
|
|
*/
|
|
void writeDataPhaseSD(uint32_t adds, uint32_t len)
|
|
{
|
|
LOGN("DATAIN PHASE(SD)");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_DATAIN);
|
|
//Bus settle delay 400ns, file.seek() measured at over 1000ns.
|
|
|
|
uint64_t pos = (uint64_t)adds * m_img->m_blocksize;
|
|
m_img->m_file.seekSet(pos);
|
|
|
|
SCSI_DB_OUTPUT()
|
|
for(uint32_t i = 0; i < len; i++) {
|
|
// Asynchronous reads will make it faster ...
|
|
m_resetJmp = false;
|
|
m_img->m_file.read(m_buf, m_img->m_blocksize);
|
|
enableResetJmp();
|
|
|
|
writeDataLoop(m_img->m_blocksize, m_buf);
|
|
}
|
|
SCSI_DB_INPUT()
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_INPUT)
|
|
#endif
|
|
}
|
|
|
|
#pragma GCC push_options
|
|
#pragma GCC optimize ("-Os")
|
|
|
|
/*
|
|
* See writeDataLoop for optimization info.
|
|
*/
|
|
void readDataLoop(uint32_t blockSize, byte* dstptr) __attribute__ ((aligned(16)));
|
|
void readDataLoop(uint32_t blockSize, byte* dstptr)
|
|
{
|
|
register byte *endptr= dstptr + blockSize - 1;
|
|
|
|
#define REQ_ON() (port_b->BRR = req_bit);
|
|
#define REQ_OFF() (port_b->BSRR = req_bit);
|
|
#define WAIT_ACK_ACTIVE() while((*port_a_idr>>(vACK&15)&1))
|
|
#define WAIT_ACK_INACTIVE() while(!(*port_a_idr>>(vACK&15)&1))
|
|
register uint32_t req_bit = BITMASK(vREQ);
|
|
register gpio_reg_map *port_b = PBREG;
|
|
register volatile uint32_t *port_a_idr = &(GPIOA->regs->IDR);
|
|
REQ_ON();
|
|
// Fastest alignment obtained by trial and error.
|
|
// Wait loop is within an 8 byte prefetch buffer.
|
|
asm("nop");
|
|
do {
|
|
WAIT_ACK_ACTIVE();
|
|
uint32_t ret = port_b->IDR;
|
|
REQ_OFF();
|
|
*dstptr++ = ~(ret >> 8);
|
|
// Move wait loop in to a single 8 byte prefetch buffer
|
|
asm("nop;nop;nop");
|
|
WAIT_ACK_INACTIVE();
|
|
REQ_ON();
|
|
// Extra 1 cycle delay
|
|
asm("nop");
|
|
} while(dstptr<endptr);
|
|
WAIT_ACK_ACTIVE();
|
|
uint32_t ret = GPIOB->regs->IDR;
|
|
REQ_OFF();
|
|
*dstptr = ~(ret >> 8);
|
|
WAIT_ACK_INACTIVE();
|
|
}
|
|
#pragma GCC pop_options
|
|
|
|
/*
|
|
* Data out phase.
|
|
* len block read
|
|
*/
|
|
void readDataPhase(int len, byte* p)
|
|
{
|
|
LOGN("DATAOUT PHASE");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_DATAOUT);
|
|
// Bus settle delay 400ns. The following code was measured at 450ns before REQ asserted. STM32F103.
|
|
readDataLoop(len, p);
|
|
}
|
|
|
|
/*
|
|
* Data out phase.
|
|
* Write to SD card while reading len block.
|
|
*/
|
|
void readDataPhaseSD(uint32_t adds, uint32_t len)
|
|
{
|
|
LOGN("DATAOUT PHASE(SD)");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_DATAOUT);
|
|
//Bus settle delay 400ns, file.seek() measured at over 1000ns.
|
|
|
|
uint64_t pos = (uint64_t)adds * m_img->m_blocksize;
|
|
m_img->m_file.seekSet(pos);
|
|
for(uint32_t i = 0; i < len; i++) {
|
|
m_resetJmp = true;
|
|
readDataLoop(m_img->m_blocksize, m_buf);
|
|
m_resetJmp = false;
|
|
m_img->m_file.write(m_buf, m_img->m_blocksize);
|
|
// If a reset happened while writing, break and let the flush happen before it is handled.
|
|
if (m_isBusReset) {
|
|
break;
|
|
}
|
|
}
|
|
m_img->m_file.flush();
|
|
enableResetJmp();
|
|
}
|
|
|
|
/*
|
|
* Data out phase.
|
|
* Compare to SD card while reading len block.
|
|
*/
|
|
void verifyDataPhaseSD(uint32_t adds, uint32_t len)
|
|
{
|
|
LOGN("DATAOUT PHASE(SD)");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_DATAOUT);
|
|
//Bus settle delay 400ns, file.seek() measured at over 1000ns.
|
|
|
|
uint64_t pos = (uint64_t)adds * m_img->m_blocksize;
|
|
m_img->m_file.seekSet(pos);
|
|
for(uint32_t i = 0; i < len; i++) {
|
|
readDataLoop(m_img->m_blocksize, m_buf);
|
|
// This has just gone through the transfer to make things work, a compare would go here.
|
|
}
|
|
}
|
|
|
|
/*
|
|
* INQUIRY command processing.
|
|
*/
|
|
byte onInquiryCommand(byte len)
|
|
{
|
|
writeDataPhase(len < 36 ? len : 36, SCSI_INFO_BUF);
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* REQUEST SENSE command processing.
|
|
*/
|
|
void onRequestSenseCommand(byte len)
|
|
{
|
|
byte buf[18] = {
|
|
0x70, //CheckCondition
|
|
0, //Segment number
|
|
m_senseKey, //Sense key
|
|
0, 0, 0, 0, //information
|
|
10, //Additional data length
|
|
0, 0, 0, 0, // command specific information bytes
|
|
(byte)(m_addition_sense >> 8),
|
|
(byte)m_addition_sense,
|
|
0, 0, 0, 0,
|
|
};
|
|
m_senseKey = 0;
|
|
m_addition_sense = 0;
|
|
writeDataPhase(len < 18 ? len : 18, buf);
|
|
}
|
|
|
|
/*
|
|
* READ CAPACITY command processing.
|
|
*/
|
|
byte onReadCapacityCommand(byte pmi)
|
|
{
|
|
if(!m_img) {
|
|
m_senseKey = SCSI_SENSE_NOT_READY;
|
|
m_addition_sense = SCSI_ASC_LUN_NOT_READY_MANUAL_INTERVENTION_REQUIRED;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
|
|
uint32_t bl = m_img->m_blocksize;
|
|
uint32_t bc = m_img->m_fileSize / bl - 1; // Points to last LBA
|
|
uint8_t buf[8] = {
|
|
bc >> 24, bc >> 16, bc >> 8, bc,
|
|
bl >> 24, bl >> 16, bl >> 8, bl
|
|
};
|
|
writeDataPhase(8, buf);
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* Check that the image file is present and the block range is valid.
|
|
*/
|
|
byte checkBlockCommand(uint32_t adds, uint32_t len)
|
|
{
|
|
// Check that image file is present
|
|
if(!m_img) {
|
|
m_senseKey = SCSI_SENSE_NOT_READY;
|
|
m_addition_sense = SCSI_ASC_LUN_NOT_READY_MANUAL_INTERVENTION_REQUIRED;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
// Check block range is valid
|
|
uint32_t bc = m_img->m_fileSize / m_img->m_blocksize;
|
|
if (adds >= bc || (adds + len) > bc) {
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* READ6 / 10 Command processing.
|
|
*/
|
|
byte onReadCommand(uint32_t adds, uint32_t len)
|
|
{
|
|
LOGN("-R");
|
|
LOGHEXN(adds);
|
|
LOGHEXN(len);
|
|
|
|
byte sts = checkBlockCommand(adds, len);
|
|
if (sts) {
|
|
return sts;
|
|
}
|
|
LED_ON();
|
|
writeDataPhaseSD(adds, len);
|
|
LED_OFF();
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* WRITE6 / 10 Command processing.
|
|
*/
|
|
byte onWriteCommand(uint32_t adds, uint32_t len)
|
|
{
|
|
LOGN("-W");
|
|
LOGHEXN(adds);
|
|
LOGHEXN(len);
|
|
|
|
byte sts = checkBlockCommand(adds, len);
|
|
if (sts) {
|
|
return sts;
|
|
}
|
|
LED_ON();
|
|
readDataPhaseSD(adds, len);
|
|
LED_OFF();
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* VERIFY10 Command processing.
|
|
*/
|
|
|
|
byte onVerifyCommand(byte flags, uint32_t adds, uint32_t len)
|
|
{
|
|
byte sts = checkBlockCommand(adds, len);
|
|
if (sts) {
|
|
return sts;
|
|
}
|
|
int bytchk = (flags >> 1) & 0x03;
|
|
if (bytchk != 0) {
|
|
if (bytchk == 3) {
|
|
// Data-Out buffer is single logical block for repeated verification.
|
|
len = m_img->m_blocksize;
|
|
}
|
|
LED_ON();
|
|
verifyDataPhaseSD(adds, len);
|
|
LED_OFF();
|
|
}
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* MODE SENSE command processing.
|
|
*/
|
|
byte onModeSenseCommand(byte scsi_cmd, byte dbd, byte cmd2, uint32_t len)
|
|
{
|
|
if(!m_img) {
|
|
m_senseKey = SCSI_SENSE_NOT_READY;
|
|
m_addition_sense = SCSI_ASC_LUN_NOT_READY_MANUAL_INTERVENTION_REQUIRED;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
|
|
uint32_t bl = m_img->m_blocksize;
|
|
uint32_t bc = m_img->m_fileSize / bl;
|
|
|
|
memset(m_buf, 0, sizeof(m_buf));
|
|
int pageCode = cmd2 & 0x3F;
|
|
int pageControl = cmd2 >> 6;
|
|
int a = 4;
|
|
if(scsi_cmd == SCSI_MODE_SENSE10) a = 8;
|
|
|
|
if(dbd == 0) {
|
|
byte c[8] = {
|
|
0,//Density code
|
|
bc >> 16, bc >> 8, bc,
|
|
0, //Reserve
|
|
bl >> 16, bl >> 8, bl
|
|
};
|
|
memcpy(&m_buf[a], c, 8);
|
|
a += 8;
|
|
}
|
|
switch(pageCode) {
|
|
case SCSI_SENSE_MODE_ALL:
|
|
case SCSI_SENSE_MODE_READ_WRITE_ERROR_RECOVERY:
|
|
m_buf[a + 0] = SCSI_SENSE_MODE_READ_WRITE_ERROR_RECOVERY;
|
|
m_buf[a + 1] = 0x0A;
|
|
a += 0x0C;
|
|
if(pageCode != SCSI_SENSE_MODE_ALL) break;
|
|
|
|
case SCSI_SENSE_MODE_DISCONNECT_RECONNECT:
|
|
m_buf[a + 0] = SCSI_SENSE_MODE_DISCONNECT_RECONNECT;
|
|
m_buf[a + 1] = 0x0A;
|
|
a += 0x0C;
|
|
if(pageCode != SCSI_SENSE_MODE_ALL) break;
|
|
|
|
case SCSI_SENSE_MODE_FORMAT_DEVICE: //Drive parameters
|
|
m_buf[a + 0] = SCSI_SENSE_MODE_FORMAT_DEVICE; //Page code
|
|
m_buf[a + 1] = 0x16; // Page length
|
|
if(pageControl != 1) {
|
|
m_buf[a + 11] = 0x3F;//Number of sectors / track
|
|
m_buf[a + 12] = (byte)(m_img->m_blocksize >> 8);
|
|
m_buf[a + 13] = (byte)m_img->m_blocksize;
|
|
m_buf[a + 15] = 0x1; // Interleave
|
|
}
|
|
a += 0x18;
|
|
if(pageCode != SCSI_SENSE_MODE_ALL) break;
|
|
|
|
case SCSI_SENSE_MODE_DISK_GEOMETRY: //Drive parameters
|
|
m_buf[a + 0] = SCSI_SENSE_MODE_DISK_GEOMETRY; //Page code
|
|
m_buf[a + 1] = 0x16; // Page length
|
|
if(pageControl != 1) {
|
|
unsigned cylinders = bc / (16 * 63);
|
|
m_buf[a + 2] = (byte)(cylinders >> 16); // Cylinders
|
|
m_buf[a + 3] = (byte)(cylinders >> 8);
|
|
m_buf[a + 4] = (byte)cylinders;
|
|
m_buf[a + 5] = 16; //Number of heads
|
|
}
|
|
a += 0x18;
|
|
if(pageCode != SCSI_SENSE_MODE_ALL) break;
|
|
case SCSI_SENSE_MODE_VENDOR_APPLE:
|
|
{
|
|
const byte page30[0x14] = {0x41, 0x50, 0x50, 0x4C, 0x45, 0x20, 0x43, 0x4F, 0x4D, 0x50, 0x55, 0x54, 0x45, 0x52, 0x2C, 0x20, 0x49, 0x4E, 0x43, 0x20};
|
|
m_buf[a + 0] = SCSI_SENSE_MODE_VENDOR_APPLE; // Page code
|
|
m_buf[a + 1] = sizeof(page30); // Page length
|
|
if(pageControl != 1) {
|
|
memcpy(&m_buf[a + 2], page30, sizeof(page30));
|
|
}
|
|
a += 2 + sizeof(page30);
|
|
if(pageCode != SCSI_SENSE_MODE_ALL) break;
|
|
}
|
|
break; // Don't want SCSI_SENSE_MODE_ALL falling through to error condition
|
|
|
|
default:
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_INVALID_FIELD_IN_CDB;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
break;
|
|
}
|
|
if(scsi_cmd == SCSI_MODE_SENSE10)
|
|
{
|
|
m_buf[1] = a - 2;
|
|
m_buf[7] = 0x08;
|
|
}
|
|
else
|
|
{
|
|
m_buf[0] = a - 1;
|
|
m_buf[3] = 0x08;
|
|
}
|
|
writeDataPhase(len < a ? len : a, m_buf);
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
byte onModeSelectCommand(byte scsi_cmd, byte flags, uint32_t len)
|
|
{
|
|
if (len > MAX_BLOCKSIZE) {
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_INVALID_FIELD_IN_CDB;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
readDataPhase(len, m_buf);
|
|
//Apple HD SC Setup sends:
|
|
//0 0 0 8 0 0 0 0 0 0 2 0 0 2 10 0 1 6 24 10 8 0 0 0
|
|
//I believe mode page 0 set to 10 00 is Disable Unit Attention
|
|
//Mode page 1 set to 24 10 08 00 00 00 is TB and PER set, read retry count 16, correction span 8
|
|
#if DEBUG > 0
|
|
for (unsigned i = 0; i < len; i++) {
|
|
LOGHEX(m_buf[i]);LOG(" ");
|
|
}
|
|
LOGN("");
|
|
#endif
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
|
|
/*
|
|
* Test Unit Ready command processing.
|
|
*/
|
|
byte onTestUnitReady()
|
|
{
|
|
// Check that image file is present
|
|
if(!m_img) {
|
|
m_senseKey = SCSI_SENSE_NOT_READY;
|
|
m_addition_sense = SCSI_ASC_MEDIUM_NOT_PRESENT;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
/*
|
|
* ReZero Unit - Move to Logical Block Zero in file.
|
|
*/
|
|
byte onReZeroUnit() {
|
|
LOGN("-ReZeroUnit");
|
|
// Make sure we have an image with atleast a first byte.
|
|
// Actually seeking to the position wont do anything, so dont.
|
|
return checkBlockCommand(0, 0);
|
|
}
|
|
|
|
/*
|
|
* WriteBuffer - Used for testing buffer, no change to medium
|
|
*/
|
|
byte onWriteBuffer(byte mode, uint32_t allocLength)
|
|
{
|
|
LOGN("-WriteBuffer");
|
|
LOGHEXN(mode);
|
|
LOGHEXN(allocLength);
|
|
|
|
if ((mode == MODE_COMBINED_HEADER_DATA || mode == MODE_DATA) && allocLength <= sizeof(m_scsi_buf))
|
|
{
|
|
readDataPhase(allocLength, m_scsi_buf);
|
|
#if DEBUG > 0
|
|
for (unsigned i = 0; i < allocLength; i++) {
|
|
LOGHEX(m_buf[i]);LOG(" ");
|
|
}
|
|
LOGN("");
|
|
#endif
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
else
|
|
{
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_INVALID_FIELD_IN_CDB;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ReadBuffer - Used for testing buffer, no change to medium
|
|
*/
|
|
byte onReadBuffer(byte mode, uint32_t allocLength)
|
|
{
|
|
LOGN("-ReadBuffer");
|
|
LOGHEXN(mode);
|
|
LOGHEXN(allocLength);
|
|
|
|
if (mode == MODE_COMBINED_HEADER_DATA)
|
|
{
|
|
uint32_t bufCapacity = sizeof(m_scsi_buf);
|
|
byte scsi_buf_response[bufCapacity + 4];
|
|
// four byte read buffer header
|
|
scsi_buf_response[0] = 0;
|
|
scsi_buf_response[1] = (bufCapacity >> 16) & 0xff;
|
|
scsi_buf_response[2] = (bufCapacity >> 8) & 0xff;
|
|
scsi_buf_response[3] = bufCapacity & 0xff;
|
|
// actual data
|
|
memcpy((&scsi_buf_response[4]), m_scsi_buf, bufCapacity);
|
|
|
|
writeDataPhase(sizeof(scsi_buf_response), scsi_buf_response);
|
|
|
|
#if DEBUG > 0
|
|
for (unsigned i = 0; i < allocLength; i++) {
|
|
LOGHEX(m_scsi_buf[i]);LOG(" ");
|
|
}
|
|
LOGN("");
|
|
#endif
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
else if (mode == MODE_DATA)
|
|
{
|
|
writeDataPhase(allocLength, m_scsi_buf);
|
|
#if DEBUG > 0
|
|
for (unsigned i = 0; i < allocLength; i++) {
|
|
LOGHEX(m_scsi_buf[i]);LOG(" ");
|
|
}
|
|
LOGN("");
|
|
#endif
|
|
return SCSI_STATUS_GOOD;
|
|
}
|
|
else
|
|
{
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_INVALID_FIELD_IN_CDB;
|
|
return SCSI_STATUS_CHECK_CONDITION;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* MsgIn2.
|
|
*/
|
|
void MsgIn2(int msg)
|
|
{
|
|
LOGN("MsgIn2");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEIN);
|
|
// Bus settle delay 400ns built in to writeHandshake
|
|
writeHandshake(msg);
|
|
}
|
|
|
|
/*
|
|
* Main loop.
|
|
*/
|
|
void loop()
|
|
{
|
|
#ifdef XCVR
|
|
// Reset all DB and Target pins, switch transceivers to input
|
|
// Precaution against bugs or jumps which don't clean up properly
|
|
SCSI_DB_INPUT();
|
|
TRANSCEIVER_IO_SET(vTR_DBP,TR_INPUT)
|
|
SCSI_TARGET_INACTIVE();
|
|
TRANSCEIVER_IO_SET(vTR_INITIATOR,TR_INPUT)
|
|
#endif
|
|
|
|
//int msg = 0;
|
|
m_msg = 0;
|
|
|
|
// Wait until RST = H, BSY = H, SEL = L
|
|
do {} while( SCSI_IN(vBSY) || !SCSI_IN(vSEL) || SCSI_IN(vRST));
|
|
|
|
// BSY+ SEL-
|
|
// If the ID to respond is not driven, wait for the next
|
|
//byte db = readIO();
|
|
//byte scsiid = db & scsi_id_mask;
|
|
byte scsiid = readIO() & scsi_id_mask;
|
|
if((scsiid) == 0) {
|
|
delayMicroseconds(1);
|
|
return;
|
|
}
|
|
LOGN("Selection");
|
|
m_isBusReset = false;
|
|
if (setjmp(m_resetJmpBuf) == 1) {
|
|
LOGN("Reset, going to BusFree");
|
|
goto BusFree;
|
|
}
|
|
enableResetJmp();
|
|
|
|
// Set BSY to-when selected
|
|
SCSI_BSY_ACTIVE(); // Turn only BSY output ON, ACTIVE
|
|
|
|
// Ask for a TARGET-ID to respond
|
|
m_id = 31 - __builtin_clz(scsiid);
|
|
|
|
// Wait until SEL becomes inactive
|
|
while(isHigh(gpio_read(SEL)) && isLow(gpio_read(BSY))) {
|
|
}
|
|
|
|
#ifdef XCVR
|
|
// Reconfigure target pins to output mode, after resetting their values
|
|
GPIOB->regs->BSRR = 0x000000E8; // MSG, CD, REQ, IO
|
|
// GPIOA->regs->BSRR = 0x00000200; // BSY
|
|
#endif
|
|
SCSI_TARGET_ACTIVE() // (BSY), REQ, MSG, CD, IO output turned on
|
|
|
|
//
|
|
if(isHigh(gpio_read(ATN))) {
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEOUT);
|
|
// Bus settle delay 400ns. Following code was measured at 350ns before REQ asserted. Added another 50ns. STM32F103.
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEOUT);// 28ns delay STM32F103
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEOUT);// 28ns delay STM32F103
|
|
bool syncenable = false;
|
|
int syncperiod = 50;
|
|
int syncoffset = 0;
|
|
int msc = 0;
|
|
while(isHigh(gpio_read(ATN)) && msc < 255) {
|
|
m_msb[msc++] = readHandshake();
|
|
}
|
|
for(int i = 0; i < msc; i++) {
|
|
// ABORT
|
|
if (m_msb[i] == 0x06) {
|
|
goto BusFree;
|
|
}
|
|
// BUS DEVICE RESET
|
|
if (m_msb[i] == 0x0C) {
|
|
syncoffset = 0;
|
|
goto BusFree;
|
|
}
|
|
// IDENTIFY
|
|
if (m_msb[i] >= 0x80) {
|
|
}
|
|
// Extended message
|
|
if (m_msb[i] == 0x01) {
|
|
// Check only when synchronous transfer is possible
|
|
if (!syncenable || m_msb[i + 2] != 0x01) {
|
|
MsgIn2(0x07);
|
|
break;
|
|
}
|
|
// Transfer period factor(50 x 4 = Limited to 200ns)
|
|
syncperiod = m_msb[i + 3];
|
|
if (syncperiod > 50) {
|
|
syncperiod = 50;
|
|
}
|
|
// REQ/ACK offset(Limited to 16)
|
|
syncoffset = m_msb[i + 4];
|
|
if (syncoffset > 16) {
|
|
syncoffset = 16;
|
|
}
|
|
// STDR response message generation
|
|
MsgIn2(0x01);
|
|
MsgIn2(0x03);
|
|
MsgIn2(0x01);
|
|
MsgIn2(syncperiod);
|
|
MsgIn2(syncoffset);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
LOG("Command:");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_COMMAND);
|
|
// Bus settle delay 400ns. The following code was measured at 20ns before REQ asserted. Added another 380ns. STM32F103.
|
|
asm("nop;nop;nop;nop;nop;nop;nop;nop");// This asm causes some code reodering, which adds 270ns, plus 8 nop cycles for an additional 110ns. STM32F103
|
|
int len;
|
|
byte cmd[12];
|
|
cmd[0] = readHandshake();
|
|
LOGHEX(cmd[0]);
|
|
// Command length selection, reception
|
|
static const int cmd_class_len[8]={6,10,10,6,6,12,6,6};
|
|
len = cmd_class_len[cmd[0] >> 5];
|
|
cmd[1] = readHandshake(); LOG(":");LOGHEX(cmd[1]);
|
|
cmd[2] = readHandshake(); LOG(":");LOGHEX(cmd[2]);
|
|
cmd[3] = readHandshake(); LOG(":");LOGHEX(cmd[3]);
|
|
cmd[4] = readHandshake(); LOG(":");LOGHEX(cmd[4]);
|
|
cmd[5] = readHandshake(); LOG(":");LOGHEX(cmd[5]);
|
|
// Receive the remaining commands
|
|
for(int i = 6; i < len; i++ ) {
|
|
cmd[i] = readHandshake();
|
|
LOG(":");
|
|
LOGHEX(cmd[i]);
|
|
}
|
|
// LUN confirmation
|
|
m_sts = cmd[1]&0xe0; // Preset LUN in status byte
|
|
m_lun = m_sts>>5;
|
|
// HDD Image selection
|
|
m_img = (HDDIMG *)0; // None
|
|
if( (m_lun <= NUM_SCSILUN) )
|
|
{
|
|
m_img = &(img[m_id][m_lun]); // There is an image
|
|
if(!(m_img->m_file.isOpen()))
|
|
m_img = (HDDIMG *)0; // Image absent
|
|
}
|
|
// if(!m_img) m_sts |= 0x02; // Missing image file for LUN
|
|
//LOGHEX(((uint32_t)m_img));
|
|
|
|
LOG(":ID ");
|
|
LOG(m_id);
|
|
LOG(":LUN ");
|
|
LOG(m_lun);
|
|
|
|
LOGN("");
|
|
switch(cmd[0]) {
|
|
case SCSI_TEST_UNIT_READY:
|
|
LOGN("[Test Unit Ready]");
|
|
m_sts |= onTestUnitReady();
|
|
break;
|
|
case SCSI_REZERO_UNIT:
|
|
LOGN("[Rezero Unit]");
|
|
m_sts |= onReZeroUnit();
|
|
break;
|
|
case SCSI_REQUEST_SENSE:
|
|
LOGN("[RequestSense]");
|
|
onRequestSenseCommand(cmd[4]);
|
|
break;
|
|
case SCSI_FORMAT_UNIT4: // TODO: Implement me!
|
|
LOGN("[FormatUnit4]");
|
|
break;
|
|
case SCSI_FORMAT_UNIT6: // TODO: Implement me!
|
|
LOGN("[FormatUnit6]");
|
|
break;
|
|
case SCSI_REASSIGN_BLOCKS: // TODO: Implement me!
|
|
LOGN("[ReassignBlocks]");
|
|
break;
|
|
case SCSI_READ6:
|
|
LOGN("[Read6]");
|
|
m_sts |= onReadCommand((((uint32_t)cmd[1] & 0x1F) << 16) | ((uint32_t)cmd[2] << 8) | cmd[3], (cmd[4] == 0) ? 0x100 : cmd[4]);
|
|
break;
|
|
case SCSI_WRITE6:
|
|
LOGN("[Write6]");
|
|
m_sts |= onWriteCommand((((uint32_t)cmd[1] & 0x1F) << 16) | ((uint32_t)cmd[2] << 8) | cmd[3], (cmd[4] == 0) ? 0x100 : cmd[4]);
|
|
break;
|
|
case SCSI_SEEK6: // TODO: Implement me!
|
|
LOGN("[Seek6]");
|
|
break;
|
|
case SCSI_INQUIRY:
|
|
LOGN("[Inquiry]");
|
|
m_sts |= onInquiryCommand(cmd[4]);
|
|
break;
|
|
case SCSI_MODE_SELECT6:
|
|
LOGN("[ModeSelect6]");
|
|
m_sts |= onModeSelectCommand(cmd[0], cmd[1], cmd[4]);
|
|
break;
|
|
case SCSI_MODE_SENSE6:
|
|
LOGN("[ModeSense6]");
|
|
m_sts |= onModeSenseCommand(cmd[0], cmd[1]&0x80, cmd[2], cmd[4]);
|
|
break;
|
|
case SCSI_START_STOP_UNIT: // TODO: Implement me!
|
|
LOGN("[StartStopUnit]");
|
|
break;
|
|
case SCSI_PREVENT_ALLOW_REMOVAL: // TODO: Implement me!
|
|
LOGN("[PreAllowMed.Removal]");
|
|
break;
|
|
case SCSI_READ_CAPACITY:
|
|
LOGN("[ReadCapacity]");
|
|
m_sts |= onReadCapacityCommand(cmd[8]);
|
|
break;
|
|
case SCSI_READ10:
|
|
LOGN("[Read10]");
|
|
m_sts |= onReadCommand(((uint32_t)cmd[2] << 24) | ((uint32_t)cmd[3] << 16) | ((uint32_t)cmd[4] << 8) | cmd[5], ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_WRITE10:
|
|
LOGN("[Write10]");
|
|
m_sts |= onWriteCommand(((uint32_t)cmd[2] << 24) | ((uint32_t)cmd[3] << 16) | ((uint32_t)cmd[4] << 8) | cmd[5], ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_SEEK10: // TODO: Implement me!
|
|
LOGN("[Seek10]");
|
|
break;
|
|
case SCSI_VERIFY10:
|
|
LOGN("[Verify10]");
|
|
m_sts |= onVerifyCommand(cmd[1], ((uint32_t)cmd[2] << 24) | ((uint32_t)cmd[3] << 16) | ((uint32_t)cmd[4] << 8) | cmd[5], ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_SYNCHRONIZE_CACHE: // TODO: Implement me!
|
|
LOGN("[SynchronizeCache10]");
|
|
break;
|
|
case SCSI_MODE_SELECT10:
|
|
LOGN("[ModeSelect10");
|
|
m_sts |= onModeSelectCommand(cmd[0], cmd[1], ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_MODE_SENSE10:
|
|
LOGN("[ModeSense10]");
|
|
m_sts |= onModeSenseCommand(cmd[0], cmd[1] & 0x80, cmd[2], ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_WRITE_BUFFER:
|
|
LOGN("[WriteBuffer]");
|
|
m_sts |= onWriteBuffer(cmd[1] & 7, ((uint32_t)cmd[6] << 16) | ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
case SCSI_READ_BUFFER:
|
|
LOGN("[ReadBuffer]");
|
|
m_sts |= onReadBuffer(cmd[1] & 7, ((uint32_t)cmd[6] << 16) | ((uint32_t)cmd[7] << 8) | cmd[8]);
|
|
break;
|
|
default:
|
|
LOGN("[*Unknown]");
|
|
m_sts |= SCSI_STATUS_CHECK_CONDITION;
|
|
m_senseKey = SCSI_SENSE_ILLEGAL_REQUEST;
|
|
m_addition_sense = SCSI_ASC_INVALID_OPERATION_CODE;
|
|
break;
|
|
}
|
|
|
|
LOGN("Sts");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_STATUS);
|
|
// Bus settle delay 400ns built in to writeHandshake
|
|
writeHandshake(m_sts);
|
|
|
|
LOGN("MsgIn");
|
|
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEIN);
|
|
// Bus settle delay 400ns built in to writeHandshake
|
|
writeHandshake(m_msg);
|
|
|
|
BusFree:
|
|
LOGN("BusFree");
|
|
m_isBusReset = false;
|
|
//SCSI_OUT(vREQ,inactive) // gpio_write(REQ, low);
|
|
//SCSI_OUT(vMSG,inactive) // gpio_write(MSG, low);
|
|
//SCSI_OUT(vCD ,inactive) // gpio_write(CD, low);
|
|
//SCSI_OUT(vIO ,inactive) // gpio_write(IO, low);
|
|
//SCSI_OUT(vBSY,inactive)
|
|
SCSI_TARGET_INACTIVE() // Turn off BSY, REQ, MSG, CD, IO output
|
|
#ifdef XCVR
|
|
TRANSCEIVER_IO_SET(vTR_TARGET,TR_INPUT);
|
|
#endif
|
|
}
|