From 05504513f848302afb9599acbb92acd6aba08a6e Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Fri, 20 May 2022 13:34:45 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/External-LED.md b/External-LED.md index 0fd6d10..d54801d 100644 --- a/External-LED.md +++ b/External-LED.md @@ -8,14 +8,14 @@ Connect a LED to 5v with a resistor rated for your LED. There are a few options, but none would be considered easy. -## Remove existing LED - -Remove the existing PC13 led and solder on your own. - ## Use the latest firmware Directly connect to `PA0` If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself. +## Remove existing LED + +Remove the existing PC13 led and solder on your own, not recommended, but works. + # Recommend LED and Resistors https://www.mouser.com/technical-resources/conversion-calculators/led-series-resistor-calculator