From 1a98bfea9da3f475019d264bff2f3efbe24867f1 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Mon, 13 May 2024 13:33:11 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/External-LED.md b/External-LED.md index 2991c12..458359d 100644 --- a/External-LED.md +++ b/External-LED.md @@ -12,9 +12,9 @@ Connect a LED to 5v with a resistor rated for your LED. There are a few options which require soldering. -### Use the latest firmware & connect to `PA0` +### Use the latest firmware & connect to Pin `A0` -If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself. Remember to add an appropriate resistor between 300-500ohms. +If you are on the latest firmware you can use the same pin, `A0` as 1.1 does, you will have to solder it yourself. Remember to add an appropriate resistor between 300-500ohms. ### Remove existing LED