From 2007ebb7a67ca209e62a63b33ae02a4122a99173 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Fri, 20 May 2022 21:10:33 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/External-LED.md b/External-LED.md index 3b24eda..915776d 100644 --- a/External-LED.md +++ b/External-LED.md @@ -10,11 +10,11 @@ Connect a LED to 5v with a resistor rated for your LED. ## Activity -There are a few options, but none would be considered easy. +There are a few options which require soldering. -### Use the latest firmware & directly connect to `PA0` +### Use the latest firmware & connect to `PA0` -If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself. +If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself. Remember to add an appropriate resistor between 300-500ohms. ### Remove existing LED