From 6d11e371969352bdc8bb425259ddfda4abfc7602 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Sat, 21 May 2022 11:16:38 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/External-LED.md b/External-LED.md index c3c0009..2991c12 100644 --- a/External-LED.md +++ b/External-LED.md @@ -1,6 +1,6 @@ # 1.1-a -The power `PWR` and activity `ACT`pins are on the board behind the SD Card. You can install `1/8w` resistors at `R1`/`R2` on the top edge of the PCB. Kits and Assembled units come with `330`ohm, but anything between `300`-`500` should be safe. Your LED will be dimmer the higher the resistance. You can use the calculator at the bottom of this page to calculate the exact resistance you need if you know the LED value. +The power `PWR` and activity `ACT`pins are on the board behind the SD Card. You can install `1/8w` resistors at `R1`(PWR)/`R2`(ACT) on the top edge of the PCB. Kits and Assembled units come with `330`ohm, but anything between `300`-`500` should be safe. Your LED will be dimmer the higher the resistance. You can use the calculator at the bottom of this page to calculate the exact resistance you need if you know the LED value. # 1.0-a/b/c