diff --git a/External-LED.md b/External-LED.md
index 77b34dc..0fd6d10 100644
--- a/External-LED.md
+++ b/External-LED.md
@@ -1,4 +1,4 @@
-This is for version 1.0-a/b/c. Version 1.1 has dedicated pins.
+**This is for version 1.0-a/b/c. **Version 1.1 has dedicated pins.
 
 # Power
 
@@ -12,11 +12,9 @@ There are a few options, but none would be considered easy.
 
 Remove the existing PC13 led and solder on your own.
 
-## Drive the LED from a different PIN
+## Use the latest firmware Directly connect to `PA0`
 
-Use an unused pin such as `PA0` to connect the a resistor and LED. 
-
-NOTE: You will have to modify and re-flash the software to drive this pin instead.
+If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself.
 
 # Recommend LED and Resistors