From be6291f0f8ec3149fce62e46474621a87b9184e2 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Fri, 20 May 2022 13:34:17 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/External-LED.md b/External-LED.md index 77b34dc..0fd6d10 100644 --- a/External-LED.md +++ b/External-LED.md @@ -1,4 +1,4 @@ -This is for version 1.0-a/b/c. Version 1.1 has dedicated pins. +**This is for version 1.0-a/b/c. **Version 1.1 has dedicated pins. # Power @@ -12,11 +12,9 @@ There are a few options, but none would be considered easy. Remove the existing PC13 led and solder on your own. -## Drive the LED from a different PIN +## Use the latest firmware Directly connect to `PA0` -Use an unused pin such as `PA0` to connect the a resistor and LED. - -NOTE: You will have to modify and re-flash the software to drive this pin instead. +If you are on the latest firmware you can use the same pin, `PA0` as 1.1 does, you will have to solder it yourself. # Recommend LED and Resistors