mirror of
https://github.com/erichelgeson/BlueSCSI.git
synced 2024-09-27 02:54:31 +00:00
Updated Home (markdown)
parent
47583eb6a9
commit
cb0f2a407e
16
Home.md
16
Home.md
@ -36,6 +36,22 @@ If no image files are found PC13 will pulse on and off.
|
|||||||
|
|
||||||
To enable termination place the two jumpers on the TERM block. Termination should be enabled if it is the last device in the chain - which is normally how it is used.
|
To enable termination place the two jumpers on the TERM block. Termination should be enabled if it is the last device in the chain - which is normally how it is used.
|
||||||
|
|
||||||
|
## Troubleshooting
|
||||||
|
|
||||||
|
### Log Files
|
||||||
|
|
||||||
|
If your device is not working - check the `LOG.txt` in the root of the SD card.
|
||||||
|
|
||||||
|
### Verify you are not using a fake
|
||||||
|
|
||||||
|
How to tell if your STM32 is fake: https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes
|
||||||
|
|
||||||
|
### Performance is slower than expected
|
||||||
|
|
||||||
|
Try a different SD card. Cheap/old SD cards can affect performance.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
## Setup Arduino IDE
|
## Setup Arduino IDE
|
||||||
|
|
||||||
You only need to setup the Arduino IDE if you are planning on developing and contributing to the project. Otherwise flash a provided `.bin` file.
|
You only need to setup the Arduino IDE if you are planning on developing and contributing to the project. Otherwise flash a provided `.bin` file.
|
||||||
|
Loading…
Reference in New Issue
Block a user