From cc7a0e1b293114cf1cd93be29c0b3224821b5850 Mon Sep 17 00:00:00 2001 From: Eric Helgeson Date: Fri, 20 May 2022 21:11:07 -0500 Subject: [PATCH] Updated External LED (markdown) --- External-LED.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/External-LED.md b/External-LED.md index 915776d..c3c0009 100644 --- a/External-LED.md +++ b/External-LED.md @@ -1,6 +1,6 @@ # 1.1-a -The power `PWR` and activity `ACT`pins are on the board behind the SD Card. You can install `1/8w` resistors at `R1`/`R2` on the top edge of the PCB. Kits and Assembled units come with `330`ohm, but anything between `300`-`500` should be safe. Your LED will be dimmer the higher the resistance. You can use the calculator at the bottom to calculate the exact resistance you need if you know the LED value. +The power `PWR` and activity `ACT`pins are on the board behind the SD Card. You can install `1/8w` resistors at `R1`/`R2` on the top edge of the PCB. Kits and Assembled units come with `330`ohm, but anything between `300`-`500` should be safe. Your LED will be dimmer the higher the resistance. You can use the calculator at the bottom of this page to calculate the exact resistance you need if you know the LED value. # 1.0-a/b/c