diff --git a/BlueSCSI-1.1-DB25-Assembly.md b/BlueSCSI-1.1-DB25-Assembly.md
index 0bce554..e55152d 100644
--- a/BlueSCSI-1.1-DB25-Assembly.md
+++ b/BlueSCSI-1.1-DB25-Assembly.md
@@ -38,7 +38,8 @@ Verify you have all the components
 
 3. Solder on the resistor nets, take note of the orientation, and the location of the 220's and 330's. Use the guide below for help.
 The dot on the resistor net should be on the left, signifying the first pin. The dot and text on the resistor net should be facing toward where the BluePill will be installed.
-   *The resistor net components may have a slightly different number written on them. For example, the 300 ohm rnet may have 331 printed on the part, and the 200 ohm rnet may have 221 printed on the part.
+
+* Note: The resistor net components may have a _slightly_ different number printed on them. For example, the 300 ohm resistor net may have 331 printed on it and the 220 ohm resistor net may have 221 printed on the part.
 
 ![image](https://user-images.githubusercontent.com/79212210/175832519-52d023af-8483-464f-911b-c1577de62948.png)