NuBusFPGA/nubus-to-ztex-gateware/sdram_init.py

140 lines
5.0 KiB
Python

#!/usr/bin/env python3
from migen import *
from wb_master import *
from wb_master import _WRITE_CMD, _WAIT_CMD, _DONE_CMD
dfii_control_sel = 0x01
dfii_control_cke = 0x02
dfii_control_odt = 0x04
dfii_control_reset_n = 0x08
dfii_command_cs = 0x01
dfii_command_we = 0x02
dfii_command_cas = 0x04
dfii_command_ras = 0x08
dfii_command_wrdata = 0x10
dfii_command_rddata = 0x20
# /!\ keep up to date with csr /!\
sdram_dfii_base = 0xf0a01000
sdram_dfii_control = sdram_dfii_base + 0x000
sdram_dfii_pi0_command = sdram_dfii_base + 0x004
sdram_dfii_pi0_command_issue = sdram_dfii_base + 0x008
sdram_dfii_pi0_address = sdram_dfii_base + 0x00c
sdram_dfii_pi0_baddress = sdram_dfii_base + 0x010
# /!\ keep up to date with csr /!\
ddrphy_base = 0xf0a00000
ddrphy_rst = ddrphy_base + 0x000
ddrphy_dly_sel = ddrphy_base + 0x010
ddrphy_rdly_dq_rst = ddrphy_base + 0x014
ddrphy_rdly_dq_inc = ddrphy_base + 0x018
ddrphy_rdly_dq_bitslip_rst = ddrphy_base + 0x01c
ddrphy_rdly_dq_bitslip = ddrphy_base + 0x020
ddrphy_wdly_dq_bitslip_rst = ddrphy_base + 0x024
ddrphy_wdly_dq_bitslip = ddrphy_base + 0x028
ddrphy_rdphase = ddrphy_base + 0x02c
ddrphy_wdphase = ddrphy_base + 0x030
def period_to_cycles(sys_clk_freq, period):
return int(period*sys_clk_freq)
def ddr3_init_instructions(sys_clk_freq):
return [
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.001),
# phase
_WRITE_CMD, ddrphy_rdphase, 2,
_WRITE_CMD, ddrphy_wdphase, 3,
# software control
_WRITE_CMD, sdram_dfii_control, dfii_control_reset_n | dfii_control_odt | dfii_control_cke,
# reset
_WRITE_CMD, ddrphy_rst, 1,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.001),
_WRITE_CMD, ddrphy_rst, 0,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.001),
# release reset
_WRITE_CMD, sdram_dfii_pi0_address, 0x0,
_WRITE_CMD, sdram_dfii_pi0_baddress, 0,
_WRITE_CMD, sdram_dfii_control, dfii_control_odt|dfii_control_reset_n,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.005),
# bring cke high
_WRITE_CMD, sdram_dfii_pi0_address, 0x0,
_WRITE_CMD, sdram_dfii_pi0_baddress, 0,
_WRITE_CMD, sdram_dfii_control, dfii_control_cke|dfii_control_odt|dfii_control_reset_n,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.001),
# load mode register 2, CWL = 5
_WRITE_CMD, sdram_dfii_pi0_address, 0x200,
_WRITE_CMD, sdram_dfii_pi0_baddress, 2,
_WRITE_CMD, sdram_dfii_pi0_command, dfii_command_ras|dfii_command_cas|dfii_command_we|dfii_command_cs,
_WRITE_CMD, sdram_dfii_pi0_command_issue, 1,
# load mode register 3
_WRITE_CMD, sdram_dfii_pi0_address, 0x0,
_WRITE_CMD, sdram_dfii_pi0_baddress, 3,
_WRITE_CMD, sdram_dfii_pi0_command, dfii_command_ras|dfii_command_cas|dfii_command_we|dfii_command_cs,
_WRITE_CMD, sdram_dfii_pi0_command_issue, 1,
# load mode register 1
_WRITE_CMD, sdram_dfii_pi0_address, 0x6,
_WRITE_CMD, sdram_dfii_pi0_baddress, 1,
_WRITE_CMD, sdram_dfii_pi0_command, dfii_command_ras|dfii_command_cas|dfii_command_we|dfii_command_cs,
_WRITE_CMD, sdram_dfii_pi0_command_issue, 1,
# load mode register 0, CL=6, BL=8
_WRITE_CMD, sdram_dfii_pi0_address, 0x920,
_WRITE_CMD, sdram_dfii_pi0_baddress, 0,
_WRITE_CMD, sdram_dfii_pi0_command, dfii_command_ras|dfii_command_cas|dfii_command_we|dfii_command_cs,
_WRITE_CMD, sdram_dfii_pi0_command_issue, 1,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.0002),
# zq calibration
_WRITE_CMD, sdram_dfii_pi0_address, 0x400,
_WRITE_CMD, sdram_dfii_pi0_baddress, 0,
_WRITE_CMD, sdram_dfii_pi0_command, dfii_command_we|dfii_command_cs,
_WRITE_CMD, sdram_dfii_pi0_command_issue, 1,
_WAIT_CMD | period_to_cycles(sys_clk_freq, 0.0002),
# hardware control
_WRITE_CMD, sdram_dfii_control, dfii_control_sel,
]
def ddr3_config_instructions(bitslip, delay):
r = []
for module in range(2):
r += [_WRITE_CMD, ddrphy_dly_sel, 1<<module ]
r += [_WRITE_CMD, ddrphy_wdly_dq_bitslip_rst, 1<<module ]
r += [_WRITE_CMD, ddrphy_dly_sel, 0 ]
for module in range(2):
r += [_WRITE_CMD, ddrphy_dly_sel, 1<<module ]
r += [_WRITE_CMD, ddrphy_rdly_dq_bitslip_rst, 1]
for i in range(bitslip):
r += [_WRITE_CMD, ddrphy_rdly_dq_bitslip, 1]
r += [_WRITE_CMD, ddrphy_rdly_dq_rst, 1]
for i in range(delay):
r += [_WRITE_CMD, ddrphy_rdly_dq_inc, 1]
r += [_WRITE_CMD, ddrphy_dly_sel, 0 ]
return r
class DDR3Init(WishboneMaster):
def __init__(self, sys_clk_freq, bitslip, delay):
WishboneMaster.__init__(self,
ddr3_init_instructions(sys_clk_freq) +
ddr3_config_instructions(bitslip, delay) +
[_DONE_CMD])
class DDR3FBInit(WishboneMaster):
def __init__(self, sys_clk_freq, bitslip, delay):
WishboneMaster.__init__(self,
ddr3_init_instructions(sys_clk_freq) +
ddr3_config_instructions(bitslip, delay) +
[_DONE_CMD])