RASCSI/cpp/scsictl/scsictl.cpp

20 lines
421 B
C++
Raw Permalink Normal View History

2018-05-03 13:47:57 +00:00
//---------------------------------------------------------------------------
//
// SCSI Target Emulator PiSCSI
// for Raspberry Pi
2018-05-03 13:47:57 +00:00
//
// Copyright (C) 2022 Uwe Seimet
2018-05-03 13:47:57 +00:00
//
//---------------------------------------------------------------------------
#include "scsictl/scsictl_core.h"
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
protobuf-based rasctl/rascsi command interface (#129) * Initial protobuf definition * protobuf result message draft * Merge with develop branch * Makefile generates protobuf-based source files * Interface update * Fixed typo * Fixed typo * Updated returning status * Serialize return data * Use correct descriptor * Made interface fields required * Deserialize result * Serialization update * Updated serialization * Serialization update * Updated deserialization * status handling update * Evaluate status * Revert "Evaluate status" This reverts commit 3d8f2c3252a10618dede5f5fd80c84115551fc7d. * Completed sense_key enum * Renaming * Added protobuf Command * Updated command evaluation * Interface update * Interface update * Added DeviceType enum * Improved type-safety * Fixed typo * Type-safety update * Fixed typo * Error handling update * Updated list handling * Error handling update * Use more C++ strings * protobuf enums can provide their names * Fixed listing devices * Updated logging * Enum usage cleanup * More enum cleanup * Fixed command check * Updated type check * Updated enums * Removed unused variable * Removed goto, added exception * Socket handling cleanup * Code locality cleanup * Added helper method * Extracted code * Updated socket/file handling * Use C++ I/O * Use tolower() * Renaming * Simplified has_suffix * Fixed typo * Use spdlog namespace * Simplified formatting (endl) of error messages * Added -s option for changing the runtime log level to rasctl * Renaming * Renaming * Updated error reporting * Fixed log string formatting * String conversion cleanup * Fixed typo * Log mmap error (happens on 64 bit) * Improved proto3 compatibility, updated error handling * CHanges based on review * Fixed comment * Comment update * Updated ListDevice to not directly write to the stream * Use size_t * Renaming * Buffering update * MapController should not use fp * Use fd, not fp * rasctl has to display *all* results * rasctl has to display *all* results * Error handling update * Updated to proto3 protocol * Optimization by using protobuf-lite * RaspBian outdated protoc does not support _Name * Added protobuf-compiler to easyinstall.sh Co-authored-by: akuker <34318535+akuker@users.noreply.github.com>
2021-07-18 22:15:13 +00:00
using namespace std;
2018-05-03 13:47:57 +00:00
int main(int argc, char *argv[])
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
{
const vector<char *> args(argv, argv + argc);
2021-09-18 06:53:02 +00:00
return ScsiCtl().run(args);
2018-05-03 13:47:57 +00:00
}