RASCSI/doc/rascsi_man_page.txt

138 lines
6.0 KiB
Plaintext
Raw Normal View History

!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
2021-10-30 01:35:57 +00:00
!! ------ The native file is rascsi.1. Re-run 'make docs' after updating
rascsi(1) General Commands Manual rascsi(1)
NAME
rascsi - Emulates SCSI devices using the Raspberry Pi GPIO pins
SYNOPSIS
rascsi [-F[u00AE] FOLDER] [-L[u00AE] LOG_LEVEL] [-h] [-n VENDOR:PROD
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
UCT:REVISION] [-p[u00AE] PORT] [-r RESERVED_IDS] [-n TYPE] [-v]
[-IDn:[u] FILE] [-HDn[:u] FILE]...
DESCRIPTION
rascsi Emulates SCSI devices using the Raspberry Pi GPIO pins.
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
In the arguments to RaSCSI, one or more SCSI (-IDn[:u]) or SASI
(-HDn[:u]) devices can be specified. The number (n) after the ID or HD
identifier specifies the ID number for that device. The optional number
(u) specifies the LUN (logical unit) for that device. The default LUN
is 0. For SCSI: The ID is limited from 0-7. However, typically SCSI ID
7 is reserved for the "initiator" (the host computer). The LUN is lim
ited from 0-31. Note that SASI is considered rare and only used on very
early Sharp X68000 computers.
RaSCSI will determine the type of device based upon the file extension
of the FILE argument.
hdf: SASI Hard Disk image (XM6 SASI HD image - typically only used
with X68000)
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
hds: SCSI Hard Disk image (generic, non-removable)
hdr: SCSI Hard Disk image (generic, removable)
hdn: SCSI Hard Disk image (NEC GENUINE)
hdi: SCSI Hard Disk image (Anex86 HD image)
nhd: SCSI Hard Disk image (T98Next HD image)
hda: SCSI Hard Disk image (APPLE GENUINE - typically used with Mac
SCSI emulation)
mos: SCSI Magneto-optical image (XM6 SCSI MO image - typically only
used with X68000)
iso: SCSI CD-ROM image (ISO 9660 image)
For example, if you want to specify an Apple-compatible HD image on ID
0, you can use the following command:
sudo rascsi -ID0 /path/to/drive/hdimage.hda
Once RaSCSI starts, it will open a socket (default port is 6868) to al
low external management commands. If another process is using the
rascsi port, RaSCSI will terminate, since it is likely another instance
of RaSCSI. Once RaSCSI has initialized, the rasctl utility can be used
to send commands.
To quit RaSCSI, press Control + C. If it is running in the background,
you can kill it using an INT signal.
OPTIONS
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
-b BLOCK_SIZE
The optional block size. For SCSI drives 512, 1024, 2048 or 4096
bytes, default size is 512 bytes. For SASI drives 256 or 1024
bytes, default is 256 bytes.
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
-F FOLDER
The default folder for image files. For files in this folder no
absolute path needs to be specified. The initial default folder
is '~/images'.
-L LOG_LEVEL
The rascsi log level (trace, debug, info, warn, err, critical,
off). The default log level is 'info'.
-h Show a help page.
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
-n VENDOR:PRODUCT:REVISION
Set the vendor, product and revision for the device, to be re
turned with the INQUIRY data. A complete set of name components
must be provided. VENDOR may have up to 8, PRODUCT up to 16, RE
VISION up to 4 characters. Padding with blanks to the maxium
length is automatically applied. Once set the name of a device
cannot be changed.
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
-p PORT
The rascsi server port, default is 6868.
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
-r RESERVED_IDS
Comma-separated list of IDs to reserve. -p TYPE The optional
case-insensitive device type (SAHD, SCHD, SCRM, SCCD, SCMO,
SCBR, SCDP). If no type is specified for devices that support an
image file, rascsi tries to derive the type from the file exten
sion.
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
-v Display the rascsi version.
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
-IDn[:u] FILE
n is the SCSI ID number (0-7). u (0-31) is the optional LUN
(logical unit). The default LUN is 0.
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
FILE is the name of the image file to use for the SCSI device.
For devices that do not support an image file (SCBR, SCDP) a
dummy name must be provided.
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
-HDn[:u] FILE
n is the SASI ID number (0-15). The effective SASI ID is calcu
lated as n/2, the effective SASI LUN is calculated is the re
mainder of n/2. Alternatively the n:u syntax can be used, where
ns is the SASI ID (0-7) and u the LUN (0-1).
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
FILE is the name of the image file to use for the SASI device.
Note: SASI usage is rare, and is typically limited to early Unix
workstations and Sharp X68000 systems.
EXAMPLES
Launch RaSCSI with no emulated drives attached:
rascsi
Launch RaSCSI with an Apple hard drive image as ID 0 and a CD-ROM as ID
2
rascsi -ID0 /path/to/harddrive.hda -ID2 /path/to/cdimage.iso
Launch RaSCSI with a removable SCSI drive image as ID 0 and the raw de
vice file /dev/hdb (e.g. a USB stick) and a DaynaPort network adapter
as ID 6:
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
rascsi -ID0 -t scrm /dev/hdb -ID6 -t scdp DUMMY_FILENAME
To create an empty, 100MB HD image, use the following command:
dd if=/dev/zero of=/path/to/newimage.hda bs=512 count=204800
In case the fallocate command is available a much faster alternative to
the dd command is:
fallocate -l 104857600 /path/to/newimage.hda
SEE ALSO
Support for multiple SCSI LUNs (#318) * Updated logging * Updated logging * Updated logging * Updated ID/LUN parsing * Updated handling of max_id * The -HD option sets type to SAHD * Replaced is_sasi by device type * Updated logging * Logging update * Improved LUN evaluation * Check LUN against UnitMax * Comment update * LUN parsing update * Logging update * Logging update * Updated ReportLuns * Updated REPORT LUNS * Cleanup * Updated REPORT LUNS * Updated Execute() * Updated LUN handling * Check for consecutive LUNs * Added LUN check for remotely attached devices * Remember LUN selected by IDENTIFY * Evaluate LUN from IDENTIFY message * Added comment * Updated REPORT LUNS * Initlize LUN * Logging update * Support 32 LUNs * rasctl display update * Updated LUN check for LUNSs > 7 * Simplified LUN validation * Fixed wrong ID/LUN handling with values > 9 * Log level update * Manpage update * rascsi parser update * Updated error handling * Updated error handling * Updated LUN setup validation * Updated logging * Improved validation of consecutive LUNs * Renaming * Detach all LUNs equal to or higher than the one specified * Add support for LUN in the device list * Add ability to show device info for LUNs * Make it possible to detach and eject LUNs * Show full path to prop file * Show only LUN columns when non-0 LUNs present * Support for attaching LUNs * Add helptext * Fix handling of removable media * Retain the previous behavior of recommending the next unoccupied id * SCSI ID validation no longer needed due to changed logic * Make use of recommended id everywhere * Docstring Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
2021-10-13 09:03:31 +00:00
rasctl(1), scsimon(1), rasdump(1), sasidump(1)
Full documentation is available at:
<https://www.github.com/akuker/RASCSI/wiki/>
rascsi(1)