RASCSI/doc/piscsi_man_page.txt

120 lines
6.5 KiB
Plaintext
Raw Normal View History

!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
!! ------ The native file is piscsi.1. Re-run 'make docs' after updating
piscsi(1) General Commands Manual piscsi(1)
NAME
piscsi - Emulates SCSI devices using the Raspberry Pi GPIO pins
SYNOPSIS
piscsi [-F FOLDER] [-L LOG_LEVEL[:ID:[LUN]]] [-P ACCESS_TOKEN_FILE] [-R SCAN_DEPTH] [-h] [-n VENDOR:PRODUCT:REVISION] [-p
PORT] [-r RESERVED_IDS] [-n TYPE] [-v] [-z LOCALE] [-IDn:[u] FILE] [-HDn[:u] FILE]...
DESCRIPTION
piscsi emulates SCSI devices using the Raspberry Pi GPIO pins.
In the arguments to PiSCSI, one or more SCSI (-IDn[:u]) devices can be specified. The number (n) after the ID or HD iden
tifier specifies the ID number for that device. The optional number (u) specifies the LUN (logical unit) for that device.
The default LUN is 0. For SCSI: The ID is limited from 0-7. However, typically SCSI ID 7 is reserved for the "initiator"
(the host computer). The LUN is limited from 0-31.
PiSCSI will determine the type of device based upon the file extension of the FILE argument.
hd1: SCSI Hard Disk image (generic, non-removable, SCSI-1)
hds: SCSI Hard Disk image (generic, non-removable)
hdr: SCSI Hard Disk image (generic, removable)
hdn: SCSI Hard Disk image (NEC compatible - only used with PC-98 computers)
hdi: SCSI Hard Disk image (Anex86 proprietary - only used with PC-98 computers)
nhd: SCSI Hard Disk image (T98Next proprietary - only used with PC-98 computers)
hda: SCSI Hard Disk image (Apple compatible - typically used with Macintosh computers)
mos: SCSI Magneto-Optical image (generic - typically used with NeXT, X68000, etc.)
iso: SCSI CD-ROM or DVD-ROM image (ISO 9660 image)
is1: SCSI CD-ROM or DVD-ROM image (ISO 9660 image, SCSI-1)
For example, if you want to specify an Apple-compatible HD image on ID 0, you can use the following command:
sudo piscsi -ID0 /path/to/drive/hdimage.hda
Note: PiSCSI is a fork of RaSCSI. The two cannot be run in parallel on the same system.
Once PiSCSI starts, it will open a socket (default port is 6868) to allow external management commands. If another process
is using this port, PiSCSI will terminate, since it is likely another instance of PiSCSI or RaSCSI. Once PiSCSI has ini
tialized, the scsictl utility can be used to send commands.
To quit PiSCSI, press Control + C. If it is running in the background, you can kill it using an INT signal.
OPTIONS
-b BLOCK_SIZE
The optional block size, either 512, 1024, 2048 or 4096 bytes. Default size is 512 bytes.
-F FOLDER
The default folder for image files. For files in this folder no absolute path needs to be specified. The initial de
fault folder is '~/images'.
-L LOG_LEVEL[:ID:[LUN]]
The piscsi log level (trace, debug, info, warn, err, off). The default log level is 'info' for all devices unless a
particular device ID and an optional LUN was provided.
-P ACCESS_TOKEN_FILE
Enable authentication and read the access token from the specified file. The access token file must be owned by root
and must be readable by root only.
-R SCAN_DEPTH
Scan for image files recursively, up to a depth of SCAN_DEPTH. Depth 0 means to ignore any folders within the de
fault image filder. Be careful when using this option with many sub-folders in the default image folder. The default
depth is 1.
-h Show a help page.
-n VENDOR:PRODUCT:REVISION
Set the vendor, product and revision for the device, to be returned with the INQUIRY data. A complete set of name
components must be provided. VENDOR may have up to 8, PRODUCT up to 16, REVISION up to 4 characters. Padding with
blanks to the maxium length is automatically applied. Once set the name of a device cannot be changed.
-p PORT
The piscsi server port, default is 6868.
-r RESERVED_IDS
Comma-separated list of IDs to reserve. Pass an empty list in order to not reserve anything. -p TYPE The optional
case-insensitive device type (SAHD, SCHD, SCRM, SCCD, SCMO, SCBR, SCDP, SCLP, SCHS). If no type is specified for de
vices that support an image file, piscsi tries to derive the type from the file extension.
-v Display the piscsi version.
-z LOCALE
Overrides the default locale for client-faces error messages. The client can override the locale.
-IDn[:u] FILE
n is the SCSI ID number (0-7). u (0-31) is the optional LUN (logical unit). The default LUN is 0.
FILE is the name of the image file to use for the SCSI device. For devices that do not support an image file (SCBR,
SCDP, SCLP, SCHS) the filename may have a special meaning or a dummy name can be provided. For SCBR and SCDP it is
an optioinal prioritized list of network interfaces, an optional IP address and netmask, e.g. "inter
face=eth0,eth1,wlan0:inet=10.10.20.1/24". For SCLP it is the print command to be used and a reservation timeout in
seconds, e.g. "cmd=lp -oraw %f:timeout=60".
FILE is the name of the image file to use for the SCSI device.
EXAMPLES
Launch PiSCSI with no emulated drives attached:
piscsi
Launch PiSCSI with an Apple hard drive image as ID 0 and a CD-ROM as ID 2
piscsi -ID0 /path/to/harddrive.hda -ID2 /path/to/cdimage.iso
Launch PiSCSI with a removable SCSI drive image as ID 0 and the raw device file /dev/hdb (e.g. a USB stick) and a DaynaPort
network adapter as ID 6:
piscsi -ID0 -t scrm /dev/hdb -ID6 -t scdp daynaport
To create an empty, 100MiB HD image, use the following command:
dd if=/dev/zero of=/path/to/newimage.hda bs=512 count=204800
In case the fallocate command is available a much faster alternative to the dd command is:
fallocate -l 104857600 /path/to/newimage.hda
SEE ALSO
scsictl(1), scsimon(1), scsidump(1)
Full documentation is available at: <https://www.piscsi.com>
piscsi(1)