RASCSI/doc/scsiloop_man_page.txt
Daniel Markstedt 52c2aa474f
Rebrand project to PiSCSI (#1016)
* Rebrand project to PiSCSI
- rascsi ->piscsi
- rasctl -> scsictl
- rasdump -> scsidump
- ras* -> piscsi* (rasutil -> piscsi_util, etc.)

* Refined the formatting and wording of the app startup banner
* Kept some references to rascsi and rasctl where backwards compatibility is concerned
* Point to the new github repo URL

Co-authored-by: nucleogenic <nr@nucleogenic.com>
Co-authored-by: Uwe Seimet <Uwe.Seimet@seimet.de>
2022-12-05 09:58:23 -08:00

44 lines
1.6 KiB
Plaintext

!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
!! ------ The native file is scsiloop.1. Re-run 'make docs' after updating
scsiloop(1) General Commands Manual scsiloop(1)
NAME
scsiloop - Tool for testing the PiSCSI board with a loopback adapter installed
SYNOPSIS
scsiloop [-L LOG_LEVEL]
DESCRIPTION
scsiloop Performs a self-test of the PiSCSI hardware to ensure that the board is functioning properly. In order for this
tool to work, a special loopback cable MUST be attached to the PiSCSI SCSI connector.
In addition to testing the GPIO signals, scsiloop will perform a self-test of the hardware timers that are built into the
system on a chip (SoC).
The loopback connections for the DB25 connector are shown here:
|Pin | Name | Pin | Name |
+----+------+-----+------+
| 1 | REQ | 13 | DB7 |
| 2 | MSG | 12 | DB6 |
| 3 | I/O | 11 | DB5 |
| 4 | RST | 10 | DB3 |
| 5 | ACK | 8 | DB0 |
| 6 | BSY | 20 | DBP |
| 15 | C/D | 23 | DB4 |
| 17 | ATN | 22 | DB2 |
| 19 | SEL | 21 | DB1 |
OPTIONS
-L LOG_LEVEL
The piscsi log level (trace, debug, info, warn, err, off). The default log level is 'info'.
SEE ALSO
scsictl(1), piscsi(1), scsimon(1)
Full documentation is available at: <https://www.piscsi.com>
scsiloop(1)