Macintosh-HW/RASCSI
1
0
Fork 0
mirror of https://github.com/akuker/RASCSI.git synced 2024-11-26 13:49:21 +00:00
Code Issues Projects Releases Wiki Activity
304d36fea0
RASCSI/hw
History
Tony 304d36fea0 Generated .STEP file for RaSCSI
2021-01-19 10:48:56 -06:00
..
daisy_chain_board Version 2.2 of the fullspec board with surface mount parts (#24) 2020-08-22 20:08:43 -05:00
IIciCase Create IIciCase.FCStd (#44) 2020-10-16 20:47:32 -05:00
rascsi_1p5 Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name 2020-08-14 14:15:12 -05:00
rascsi_1p6 Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name 2020-08-14 14:15:12 -05:00
rascsi_2p1 Changed Bus Transceivers to 74LS641-1 per discussion on 68kmla forums 2020-08-03 09:57:53 -05:00
rascsi_2p2 Version 2.2 of the fullspec board with surface mount parts (#24) 2020-08-22 20:08:43 -05:00
rascsi_2p3 Generated .STEP file for RaSCSI 2021-01-19 10:48:56 -06:00
rascsi_tester Version 2.2 of the fullspec board with surface mount parts (#24) 2020-08-22 20:08:43 -05:00
README.md Create README.md 2020-10-24 22:49:23 -05:00

README.md

RaSCSI Hardware

A high lever overview of the RaSCSI versions is available on the wiki: https://github.com/akuker/RASCSI/wiki/Hardware-Versions

Other things

  • IIciCase - A 3D printable case, developed in FreeCAD, that resembles a Mac IIci case. In order to use this case, you'll need to take the following into consideration:
    • This case only works with a Raspberry Pi Zero, where it is mounted on TOP of the RaSCSI
    • When you assemble the RaSCSI, you should use plain header pins instead of the box header for the 50-pin SCSI connector. If you don't, the header will be too wide to fit in the case
  • Daisy Chain Board - This board can stack on top of the RaSCSI to add a second SCSI port. This allows the RaSCSI to exist in the middle of the SCSI chain.
  • RaSCSI Tester - A prototype board that was intended to test new RaSCSIs to make sure they're working properly. This board was never debugged. Contact akuker if you are interested in doing something with it!