mirror of
https://github.com/akuker/RASCSI.git
synced 2024-11-29 16:49:55 +00:00
621cc7d5a2
* Unit test updates * Lambda syntax cleanup * Use new-style casts * Use std::none_of when saving the cache * Use to_integer instead of casts * Use accessors for getting CDB data * Made ctrl_t private * Improved encapsulation * Replaced pointers by references * Removed all remaining occurrences of DWORD and BYTE, making os.h obsolete
989 lines
25 KiB
C++
989 lines
25 KiB
C++
//---------------------------------------------------------------------------
|
|
//
|
|
// SCSI Target Emulator RaSCSI Reloaded
|
|
// for Raspberry Pi
|
|
//
|
|
// Powered by XM6 TypeG Technology.
|
|
// Copyright (C) 2016-2020 GIMONS
|
|
//
|
|
// [ GPIO-SCSI bus ]
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
|
|
#include "hal/gpiobus.h"
|
|
#include "config.h"
|
|
#include "hal/sbc_version.h"
|
|
#include "hal/systimer.h"
|
|
#include "log.h"
|
|
#include <array>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mman.h>
|
|
#include <sys/time.h>
|
|
#ifdef __linux__
|
|
#include <sys/epoll.h>
|
|
#endif
|
|
|
|
#if defined CONNECT_TYPE_STANDARD
|
|
#include "hal/gpiobus_standard.h"
|
|
#elif defined CONNECT_TYPE_FULLSPEC
|
|
#include "hal/gpiobus_fullspec.h"
|
|
#elif defined CONNECT_TYPE_AIBOM
|
|
#include "hal/gpiobus_aibom.h"
|
|
#elif defined CONNECT_TYPE_GAMERNIUM
|
|
#include "hal/gpiobus_gamernium.h"
|
|
#else
|
|
#error Invalid connection type or none specified
|
|
#endif
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Constant declarations (bus control timing)
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
// SCSI Bus timings taken from:
|
|
// https://www.staff.uni-mainz.de/tacke/scsi/SCSI2-05.html
|
|
[[maybe_unused]] const static int SCSI_DELAY_ARBITRATION_DELAY_NS = 2400;
|
|
[[maybe_unused]] const static int SCSI_DELAY_ASSERTION_PERIOD_NS = 90;
|
|
[[maybe_unused]] const static int SCSI_DELAY_BUS_CLEAR_DELAY_NS = 800;
|
|
[[maybe_unused]] const static int SCSI_DELAY_BUS_FREE_DELAY_NS = 800;
|
|
[[maybe_unused]] const static int SCSI_DELAY_BUS_SET_DELAY_NS = 1800;
|
|
[[maybe_unused]] const static int SCSI_DELAY_BUS_SETTLE_DELAY_NS = 400;
|
|
[[maybe_unused]] const static int SCSI_DELAY_CABLE_SKEW_DELAY_NS = 10;
|
|
[[maybe_unused]] const static int SCSI_DELAY_DATA_RELEASE_DELAY_NS = 400;
|
|
[[maybe_unused]] const static int SCSI_DELAY_DESKEW_DELAY_NS = 45;
|
|
[[maybe_unused]] const static int SCSI_DELAY_DISCONNECTION_DELAY_US = 200;
|
|
[[maybe_unused]] const static int SCSI_DELAY_HOLD_TIME_NS = 45;
|
|
[[maybe_unused]] const static int SCSI_DELAY_NEGATION_PERIOD_NS = 90;
|
|
[[maybe_unused]] const static int SCSI_DELAY_POWER_ON_TO_SELECTION_TIME_S = 10; // (recommended)
|
|
[[maybe_unused]] const static int SCSI_DELAY_RESET_TO_SELECTION_TIME_US = 250 * 1000; // (recommended)
|
|
[[maybe_unused]] const static int SCSI_DELAY_RESET_HOLD_TIME_US = 25;
|
|
[[maybe_unused]] const static int SCSI_DELAY_SELECTION_ABORT_TIME_US = 200;
|
|
[[maybe_unused]] const static int SCSI_DELAY_SELECTION_TIMEOUT_DELAY_NS = 250 * 1000; // (recommended)
|
|
[[maybe_unused]] const static int SCSI_DELAY_FAST_ASSERTION_PERIOD_NS = 30;
|
|
[[maybe_unused]] const static int SCSI_DELAY_FAST_CABLE_SKEW_DELAY_NS = 5;
|
|
[[maybe_unused]] const static int SCSI_DELAY_FAST_DESKEW_DELAY_NS = 20;
|
|
[[maybe_unused]] const static int SCSI_DELAY_FAST_HOLD_TIME_NS = 10;
|
|
[[maybe_unused]] const static int SCSI_DELAY_FAST_NEGATION_PERIOD_NS = 30;
|
|
|
|
// The DaynaPort SCSI Link do a short delay in the middle of transfering
|
|
// a packet. This is the number of uS that will be delayed between the
|
|
// header and the actual data.
|
|
const static int SCSI_DELAY_SEND_DATA_DAYNAPORT_US = 100;
|
|
|
|
using namespace std;
|
|
|
|
// Nothing SBC hardware specific should be done in this function
|
|
bool GPIOBUS::Init(mode_e mode)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
// Save operation mode
|
|
actmode = mode;
|
|
return true;
|
|
}
|
|
|
|
void GPIOBUS::Cleanup()
|
|
{
|
|
#if defined(__x86_64__) || defined(__X86__)
|
|
return;
|
|
#else
|
|
// Release SEL signal interrupt
|
|
#ifdef USE_SEL_EVENT_ENABLE
|
|
close(selevreq.fd);
|
|
#endif // USE_SEL_EVENT_ENABLE
|
|
|
|
// Set control signals
|
|
PinSetSignal(PIN_ENB, OFF);
|
|
PinSetSignal(PIN_ACT, OFF);
|
|
PinSetSignal(PIN_TAD, OFF);
|
|
PinSetSignal(PIN_IND, OFF);
|
|
PinSetSignal(PIN_DTD, OFF);
|
|
PinConfig(PIN_ACT, GPIO_INPUT);
|
|
PinConfig(PIN_TAD, GPIO_INPUT);
|
|
PinConfig(PIN_IND, GPIO_INPUT);
|
|
PinConfig(PIN_DTD, GPIO_INPUT);
|
|
|
|
// Initialize all signals
|
|
for (int i = 0; SignalTable[i] >= 0; i++) {
|
|
int pin = SignalTable[i];
|
|
PinSetSignal(pin, OFF);
|
|
PinConfig(pin, GPIO_INPUT);
|
|
PullConfig(pin, GPIO_PULLNONE);
|
|
}
|
|
|
|
// Set drive strength back to 8mA
|
|
DrvConfig(3);
|
|
#endif // ifdef __x86_64__ || __X86__
|
|
}
|
|
|
|
void GPIOBUS::Reset()
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
#if defined(__x86_64__) || defined(__X86__)
|
|
return;
|
|
#else
|
|
int i;
|
|
int j;
|
|
|
|
// Turn off active signal
|
|
SetControl(PIN_ACT, ACT_OFF);
|
|
|
|
// Set all signals to off
|
|
for (i = 0;; i++) {
|
|
j = SignalTable[i];
|
|
if (j < 0) {
|
|
break;
|
|
}
|
|
|
|
SetSignal(j, OFF);
|
|
}
|
|
|
|
if (actmode == mode_e::TARGET) {
|
|
// Target mode
|
|
|
|
// Set target signal to input
|
|
SetControl(PIN_TAD, TAD_IN);
|
|
SetMode(PIN_BSY, IN);
|
|
SetMode(PIN_MSG, IN);
|
|
SetMode(PIN_CD, IN);
|
|
SetMode(PIN_REQ, IN);
|
|
SetMode(PIN_IO, IN);
|
|
|
|
// Set the initiator signal to input
|
|
SetControl(PIN_IND, IND_IN);
|
|
SetMode(PIN_SEL, IN);
|
|
SetMode(PIN_ATN, IN);
|
|
SetMode(PIN_ACK, IN);
|
|
SetMode(PIN_RST, IN);
|
|
|
|
// Set data bus signals to input
|
|
SetControl(PIN_DTD, DTD_IN);
|
|
SetMode(PIN_DT0, IN);
|
|
SetMode(PIN_DT1, IN);
|
|
SetMode(PIN_DT2, IN);
|
|
SetMode(PIN_DT3, IN);
|
|
SetMode(PIN_DT4, IN);
|
|
SetMode(PIN_DT5, IN);
|
|
SetMode(PIN_DT6, IN);
|
|
SetMode(PIN_DT7, IN);
|
|
SetMode(PIN_DP, IN);
|
|
} else {
|
|
// Initiator mode
|
|
|
|
// Set target signal to input
|
|
SetControl(PIN_TAD, TAD_IN);
|
|
SetMode(PIN_BSY, IN);
|
|
SetMode(PIN_MSG, IN);
|
|
SetMode(PIN_CD, IN);
|
|
SetMode(PIN_REQ, IN);
|
|
SetMode(PIN_IO, IN);
|
|
|
|
// Set the initiator signal to output
|
|
SetControl(PIN_IND, IND_OUT);
|
|
SetMode(PIN_SEL, OUT);
|
|
SetMode(PIN_ATN, OUT);
|
|
SetMode(PIN_ACK, OUT);
|
|
SetMode(PIN_RST, OUT);
|
|
|
|
// Set the data bus signals to output
|
|
SetControl(PIN_DTD, DTD_OUT);
|
|
SetMode(PIN_DT0, OUT);
|
|
SetMode(PIN_DT1, OUT);
|
|
SetMode(PIN_DT2, OUT);
|
|
SetMode(PIN_DT3, OUT);
|
|
SetMode(PIN_DT4, OUT);
|
|
SetMode(PIN_DT5, OUT);
|
|
SetMode(PIN_DT6, OUT);
|
|
SetMode(PIN_DT7, OUT);
|
|
SetMode(PIN_DP, OUT);
|
|
}
|
|
|
|
// Initialize all signals
|
|
signals = 0;
|
|
#endif // ifdef __x86_64__ || __X86__
|
|
}
|
|
|
|
void GPIOBUS::SetENB(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
PinSetSignal(PIN_ENB, ast ? ENB_ON : ENB_OFF);
|
|
}
|
|
|
|
bool GPIOBUS::GetBSY() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_BSY);
|
|
}
|
|
|
|
void GPIOBUS::SetBSY(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
// Set BSY signal
|
|
SetSignal(PIN_BSY, ast);
|
|
|
|
if (actmode == mode_e::TARGET) {
|
|
if (ast) {
|
|
// Turn on ACTIVE signal
|
|
SetControl(PIN_ACT, ACT_ON);
|
|
|
|
// Set Target signal to output
|
|
SetControl(PIN_TAD, TAD_OUT);
|
|
|
|
SetMode(PIN_BSY, OUT);
|
|
SetMode(PIN_MSG, OUT);
|
|
SetMode(PIN_CD, OUT);
|
|
SetMode(PIN_REQ, OUT);
|
|
SetMode(PIN_IO, OUT);
|
|
} else {
|
|
// Turn off the ACTIVE signal
|
|
SetControl(PIN_ACT, ACT_OFF);
|
|
|
|
// Set the target signal to input
|
|
SetControl(PIN_TAD, TAD_IN);
|
|
|
|
SetMode(PIN_BSY, IN);
|
|
SetMode(PIN_MSG, IN);
|
|
SetMode(PIN_CD, IN);
|
|
SetMode(PIN_REQ, IN);
|
|
SetMode(PIN_IO, IN);
|
|
}
|
|
}
|
|
}
|
|
|
|
bool GPIOBUS::GetSEL() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_SEL);
|
|
}
|
|
|
|
void GPIOBUS::SetSEL(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
if (actmode == mode_e::INITIATOR && ast) {
|
|
// Turn on ACTIVE signal
|
|
SetControl(PIN_ACT, ACT_ON);
|
|
}
|
|
|
|
// Set SEL signal
|
|
SetSignal(PIN_SEL, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetATN() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_ATN);
|
|
}
|
|
|
|
void GPIOBUS::SetATN(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_ATN, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetACK() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_ACK);
|
|
}
|
|
|
|
void GPIOBUS::SetACK(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_ACK, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetACT() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_ACT);
|
|
}
|
|
|
|
void GPIOBUS::SetACT(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_ACT, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetRST() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_RST);
|
|
}
|
|
|
|
void GPIOBUS::SetRST(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_RST, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetMSG() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_MSG);
|
|
}
|
|
|
|
void GPIOBUS::SetMSG(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_MSG, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetCD() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_CD);
|
|
}
|
|
|
|
void GPIOBUS::SetCD(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_CD, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetIO()
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
bool ast = GetSignal(PIN_IO);
|
|
|
|
if (actmode == mode_e::INITIATOR) {
|
|
// Change the data input/output direction by IO signal
|
|
if (ast) {
|
|
SetControl(PIN_DTD, DTD_IN);
|
|
SetMode(PIN_DT0, IN);
|
|
SetMode(PIN_DT1, IN);
|
|
SetMode(PIN_DT2, IN);
|
|
SetMode(PIN_DT3, IN);
|
|
SetMode(PIN_DT4, IN);
|
|
SetMode(PIN_DT5, IN);
|
|
SetMode(PIN_DT6, IN);
|
|
SetMode(PIN_DT7, IN);
|
|
SetMode(PIN_DP, IN);
|
|
} else {
|
|
SetControl(PIN_DTD, DTD_OUT);
|
|
SetMode(PIN_DT0, OUT);
|
|
SetMode(PIN_DT1, OUT);
|
|
SetMode(PIN_DT2, OUT);
|
|
SetMode(PIN_DT3, OUT);
|
|
SetMode(PIN_DT4, OUT);
|
|
SetMode(PIN_DT5, OUT);
|
|
SetMode(PIN_DT6, OUT);
|
|
SetMode(PIN_DT7, OUT);
|
|
SetMode(PIN_DP, OUT);
|
|
}
|
|
}
|
|
|
|
return ast;
|
|
}
|
|
|
|
void GPIOBUS::SetIO(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_IO, ast);
|
|
|
|
if (actmode == mode_e::TARGET) {
|
|
// Change the data input/output direction by IO signal
|
|
if (ast) {
|
|
SetControl(PIN_DTD, DTD_OUT);
|
|
SetDAT(0);
|
|
SetMode(PIN_DT0, OUT);
|
|
SetMode(PIN_DT1, OUT);
|
|
SetMode(PIN_DT2, OUT);
|
|
SetMode(PIN_DT3, OUT);
|
|
SetMode(PIN_DT4, OUT);
|
|
SetMode(PIN_DT5, OUT);
|
|
SetMode(PIN_DT6, OUT);
|
|
SetMode(PIN_DT7, OUT);
|
|
SetMode(PIN_DP, OUT);
|
|
} else {
|
|
SetControl(PIN_DTD, DTD_IN);
|
|
SetMode(PIN_DT0, IN);
|
|
SetMode(PIN_DT1, IN);
|
|
SetMode(PIN_DT2, IN);
|
|
SetMode(PIN_DT3, IN);
|
|
SetMode(PIN_DT4, IN);
|
|
SetMode(PIN_DT5, IN);
|
|
SetMode(PIN_DT6, IN);
|
|
SetMode(PIN_DT7, IN);
|
|
SetMode(PIN_DP, IN);
|
|
}
|
|
}
|
|
}
|
|
|
|
bool GPIOBUS::GetREQ() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_REQ);
|
|
}
|
|
|
|
void GPIOBUS::SetREQ(bool ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
SetSignal(PIN_REQ, ast);
|
|
}
|
|
|
|
bool GPIOBUS::GetDP() const
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
return GetSignal(PIN_DP);
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Receive command handshake
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
int GPIOBUS::CommandHandShake(uint8_t *buf)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
// Only works in TARGET mode
|
|
if (actmode != mode_e::TARGET) {
|
|
return 0;
|
|
}
|
|
|
|
DisableIRQ();
|
|
|
|
// Assert REQ signal
|
|
SetSignal(PIN_REQ, ON);
|
|
|
|
// Wait for ACK signal
|
|
bool ret = WaitSignal(PIN_ACK, ON);
|
|
|
|
// Wait until the signal line stabilizes
|
|
SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);
|
|
|
|
// Get data
|
|
*buf = GetDAT();
|
|
|
|
// Disable REQ signal
|
|
SetSignal(PIN_REQ, OFF);
|
|
|
|
// Timeout waiting for ACK assertion
|
|
if (!ret) {
|
|
EnableIRQ();
|
|
return 0;
|
|
}
|
|
|
|
// Wait for ACK to clear
|
|
ret = WaitSignal(PIN_ACK, OFF);
|
|
|
|
// Timeout waiting for ACK to clear
|
|
if (!ret) {
|
|
EnableIRQ();
|
|
return 0;
|
|
}
|
|
|
|
// The ICD AdSCSI ST, AdSCSI Plus ST and AdSCSI Micro ST host adapters allow SCSI devices to be connected
|
|
// to the ACSI bus of Atari ST/TT computers and some clones. ICD-aware drivers prepend a $1F byte in front
|
|
// of the CDB (effectively resulting in a custom SCSI command) in order to get access to the full SCSI
|
|
// command set. Native ACSI is limited to the low SCSI command classes with command bytes < $20.
|
|
// Most other host adapters (e.g. LINK96/97 and the one by Inventronik) and also several devices (e.g.
|
|
// UltraSatan or GigaFile) that can directly be connected to the Atari's ACSI port also support ICD
|
|
// semantics. I fact, these semantics have become a standard in the Atari world.
|
|
|
|
// RaSCSI becomes ICD compatible by ignoring the prepended $1F byte before processing the CDB.
|
|
if (*buf == 0x1F) {
|
|
SetSignal(PIN_REQ, ON);
|
|
|
|
ret = WaitSignal(PIN_ACK, ON);
|
|
|
|
SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);
|
|
|
|
// Get the actual SCSI command
|
|
*buf = GetDAT();
|
|
|
|
SetSignal(PIN_REQ, OFF);
|
|
|
|
if (!ret) {
|
|
EnableIRQ();
|
|
return 0;
|
|
}
|
|
|
|
WaitSignal(PIN_ACK, OFF);
|
|
|
|
if (!ret) {
|
|
EnableIRQ();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int command_byte_count = GetCommandByteCount(*buf);
|
|
|
|
// Increment buffer pointer
|
|
buf++;
|
|
|
|
int bytes_received;
|
|
for (bytes_received = 1; bytes_received < command_byte_count; bytes_received++) {
|
|
// Assert REQ signal
|
|
SetSignal(PIN_REQ, ON);
|
|
|
|
// Wait for ACK signal
|
|
ret = WaitSignal(PIN_ACK, ON);
|
|
|
|
// Wait until the signal line stabilizes
|
|
SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);
|
|
|
|
// Get data
|
|
*buf = GetDAT();
|
|
|
|
// Clear the REQ signal
|
|
SetSignal(PIN_REQ, OFF);
|
|
|
|
// Check for timeout waiting for ACK assertion
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Wait for ACK to clear
|
|
ret = WaitSignal(PIN_ACK, OFF);
|
|
|
|
// Check for timeout waiting for ACK to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Advance the buffer pointer to receive the next byte
|
|
buf++;
|
|
}
|
|
|
|
EnableIRQ();
|
|
|
|
return bytes_received;
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Data reception handshake
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
int GPIOBUS::ReceiveHandShake(uint8_t *buf, int count)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
|
|
int i;
|
|
|
|
// Disable IRQs
|
|
DisableIRQ();
|
|
|
|
if (actmode == mode_e::TARGET) {
|
|
for (i = 0; i < count; i++) {
|
|
// Assert the REQ signal
|
|
SetSignal(PIN_REQ, ON);
|
|
|
|
// Wait for ACK
|
|
bool ret = WaitSignal(PIN_ACK, ON);
|
|
|
|
// Wait until the signal line stabilizes
|
|
SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);
|
|
|
|
// Get data
|
|
*buf = GetDAT();
|
|
|
|
// Clear the REQ signal
|
|
SetSignal(PIN_REQ, OFF);
|
|
|
|
// Check for timeout waiting for ACK signal
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Wait for ACK to clear
|
|
ret = WaitSignal(PIN_ACK, OFF);
|
|
|
|
// Check for timeout waiting for ACK to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Advance the buffer pointer to receive the next byte
|
|
buf++;
|
|
}
|
|
} else {
|
|
// Get phase
|
|
uint32_t phase = Acquire() & GPIO_MCI;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
// Wait for the REQ signal to be asserted
|
|
bool ret = WaitSignal(PIN_REQ, ON);
|
|
|
|
// Check for timeout waiting for REQ signal
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Phase error
|
|
if ((signals & GPIO_MCI) != phase) {
|
|
break;
|
|
}
|
|
|
|
// Wait until the signal line stabilizes
|
|
SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);
|
|
|
|
// Get data
|
|
*buf = GetDAT();
|
|
|
|
// Assert the ACK signal
|
|
SetSignal(PIN_ACK, ON);
|
|
|
|
// Wait for REQ to clear
|
|
ret = WaitSignal(PIN_REQ, OFF);
|
|
|
|
// Clear the ACK signal
|
|
SetSignal(PIN_ACK, OFF);
|
|
|
|
// Check for timeout waiting for REQ to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Phase error
|
|
if ((signals & GPIO_MCI) != phase) {
|
|
break;
|
|
}
|
|
|
|
// Advance the buffer pointer to receive the next byte
|
|
buf++;
|
|
}
|
|
}
|
|
|
|
// Re-enable IRQ
|
|
EnableIRQ();
|
|
|
|
// Return the number of bytes received
|
|
return i;
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Data transmission handshake
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
int GPIOBUS::SendHandShake(uint8_t *buf, int count, int delay_after_bytes)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
|
|
int i;
|
|
|
|
// Disable IRQs
|
|
DisableIRQ();
|
|
|
|
if (actmode == mode_e::TARGET) {
|
|
for (i = 0; i < count; i++) {
|
|
if (i == delay_after_bytes) {
|
|
LOGTRACE("%s DELAYING for %dus after %d bytes", __PRETTY_FUNCTION__, SCSI_DELAY_SEND_DATA_DAYNAPORT_US,
|
|
(int)delay_after_bytes)
|
|
SysTimer::SleepUsec(SCSI_DELAY_SEND_DATA_DAYNAPORT_US);
|
|
}
|
|
|
|
// Set the DATA signals
|
|
SetDAT(*buf);
|
|
|
|
// Wait for ACK to clear
|
|
bool ret = WaitSignal(PIN_ACK, OFF);
|
|
|
|
// Check for timeout waiting for ACK to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Already waiting for ACK to clear
|
|
|
|
// Assert the REQ signal
|
|
SetSignal(PIN_REQ, ON);
|
|
|
|
// Wait for ACK
|
|
ret = WaitSignal(PIN_ACK, ON);
|
|
|
|
// Clear REQ signal
|
|
SetSignal(PIN_REQ, OFF);
|
|
|
|
// Check for timeout waiting for ACK to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Advance the data buffer pointer to receive the next byte
|
|
buf++;
|
|
}
|
|
|
|
// Wait for ACK to clear
|
|
WaitSignal(PIN_ACK, OFF);
|
|
} else {
|
|
// Get Phase
|
|
uint32_t phase = Acquire() & GPIO_MCI;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
if (i == delay_after_bytes) {
|
|
LOGTRACE("%s DELAYING for %dus after %d bytes", __PRETTY_FUNCTION__, SCSI_DELAY_SEND_DATA_DAYNAPORT_US,
|
|
(int)delay_after_bytes)
|
|
SysTimer::SleepUsec(SCSI_DELAY_SEND_DATA_DAYNAPORT_US);
|
|
}
|
|
|
|
// Set the DATA signals
|
|
SetDAT(*buf);
|
|
|
|
// Wait for REQ to be asserted
|
|
bool ret = WaitSignal(PIN_REQ, ON);
|
|
|
|
// Check for timeout waiting for REQ to be asserted
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Phase error
|
|
if ((signals & GPIO_MCI) != phase) {
|
|
break;
|
|
}
|
|
|
|
// Already waiting for REQ assertion
|
|
|
|
// Assert the ACK signal
|
|
SetSignal(PIN_ACK, ON);
|
|
|
|
// Wait for REQ to clear
|
|
ret = WaitSignal(PIN_REQ, OFF);
|
|
|
|
// Clear the ACK signal
|
|
SetSignal(PIN_ACK, OFF);
|
|
|
|
// Check for timeout waiting for REQ to clear
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
|
|
// Phase error
|
|
if ((signals & GPIO_MCI) != phase) {
|
|
break;
|
|
}
|
|
|
|
// Advance the data buffer pointer to receive the next byte
|
|
buf++;
|
|
}
|
|
}
|
|
|
|
// Re-enable IRQ
|
|
EnableIRQ();
|
|
|
|
// Return number of transmissions
|
|
return i;
|
|
}
|
|
|
|
#ifdef USE_SEL_EVENT_ENABLE
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// SEL signal event polling
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
bool GPIOBUS::PollSelectEvent()
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
errno = 0;
|
|
|
|
if (epoll_event epev; epoll_wait(epfd, &epev, 1, -1) <= 0) {
|
|
LOGWARN("%s epoll_wait failed", __PRETTY_FUNCTION__)
|
|
LOGWARN("[%08X] %s", errno, strerror(errno))
|
|
return false;
|
|
}
|
|
|
|
if (gpioevent_data gpev; read(selevreq.fd, &gpev, sizeof(gpev)) < 0) {
|
|
LOGWARN("%s read failed", __PRETTY_FUNCTION__)
|
|
LOGWARN("[%08X] %s", errno, strerror(errno))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Cancel SEL signal event
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
void GPIOBUS::ClearSelectEvent()
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
}
|
|
#endif // USE_SEL_EVENT_ENABLE
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Signal table
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
const array<int, 19> GPIOBUS::SignalTable = {PIN_DT0, PIN_DT1, PIN_DT2, PIN_DT3, PIN_DT4, PIN_DT5, PIN_DT6,
|
|
PIN_DT7, PIN_DP, PIN_SEL, PIN_ATN, PIN_RST, PIN_ACK, PIN_BSY,
|
|
PIN_MSG, PIN_CD, PIN_IO, PIN_REQ, -1};
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Create work table
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
void GPIOBUS::MakeTable(void)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
|
|
const array<int, 9> pintbl = {PIN_DT0, PIN_DT1, PIN_DT2, PIN_DT3, PIN_DT4, PIN_DT5, PIN_DT6, PIN_DT7, PIN_DP};
|
|
|
|
array<bool, 256> tblParity;
|
|
|
|
// Create parity table
|
|
for (uint32_t i = 0; i < 0x100; i++) {
|
|
uint32_t bits = i;
|
|
uint32_t parity = 0;
|
|
for (int j = 0; j < 8; j++) {
|
|
parity ^= bits & 1;
|
|
bits >>= 1;
|
|
}
|
|
parity = ~parity;
|
|
tblParity[i] = parity & 1;
|
|
}
|
|
|
|
#if SIGNAL_CONTROL_MODE == 0
|
|
// Mask and setting data generation
|
|
for (auto &tbl : tblDatMsk) {
|
|
tbl.fill(-1);
|
|
}
|
|
for (auto &tbl : tblDatSet) {
|
|
tbl.fill(0);
|
|
}
|
|
|
|
for (uint32_t i = 0; i < 0x100; i++) {
|
|
// Bit string for inspection
|
|
uint32_t bits = i;
|
|
|
|
// Get parity
|
|
if (tblParity[i]) {
|
|
bits |= (1 << 8);
|
|
}
|
|
|
|
// Bit check
|
|
for (int j = 0; j < 9; j++) {
|
|
// Index and shift amount calculation
|
|
int index = pintbl[j] / 10;
|
|
int shift = (pintbl[j] % 10) * 3;
|
|
|
|
// Mask data
|
|
tblDatMsk[index][i] &= ~(0x7 << shift);
|
|
|
|
// Setting data
|
|
if (bits & 1) {
|
|
tblDatSet[index][i] |= (1 << shift);
|
|
}
|
|
|
|
bits >>= 1;
|
|
}
|
|
}
|
|
#else
|
|
for (uint32_t i = 0; i < 0x100; i++) {
|
|
// Bit string for inspection
|
|
uint32_t bits = i;
|
|
|
|
// Get parity
|
|
if (tblParity[i]) {
|
|
bits |= (1 << 8);
|
|
}
|
|
|
|
#if SIGNAL_CONTROL_MODE == 1
|
|
// Negative logic is inverted
|
|
bits = ~bits;
|
|
#endif
|
|
|
|
// Create GPIO register information
|
|
uint32_t gpclr = 0;
|
|
uint32_t gpset = 0;
|
|
for (int j = 0; j < 9; j++) {
|
|
if (bits & 1) {
|
|
gpset |= (1 << pintbl[j]);
|
|
} else {
|
|
gpclr |= (1 << pintbl[j]);
|
|
}
|
|
bits >>= 1;
|
|
}
|
|
|
|
tblDatMsk[i] = gpclr;
|
|
tblDatSet[i] = gpset;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Wait for signal change
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
bool GPIOBUS::WaitSignal(int pin, int ast)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
|
|
// Get current time
|
|
uint32_t now = SysTimer::GetTimerLow();
|
|
|
|
// Calculate timeout (3000ms)
|
|
uint32_t timeout = 3000 * 1000;
|
|
|
|
// end immediately if the signal has changed
|
|
do {
|
|
// Immediately upon receiving a reset
|
|
Acquire();
|
|
if (GetRST()) {
|
|
return false;
|
|
}
|
|
|
|
// Check for the signal edge
|
|
if (((signals >> pin) ^ ~ast) & 1) {
|
|
return true;
|
|
}
|
|
} while ((SysTimer::GetTimerLow() - now) < timeout);
|
|
|
|
// We timed out waiting for the signal
|
|
return false;
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Generic Phase Acquisition (Doesn't read GPIO)
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
BUS::phase_t GPIOBUS::GetPhaseRaw(uint32_t raw_data)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
// Selection Phase
|
|
if (GetPinRaw(raw_data, PIN_SEL)) {
|
|
if (GetPinRaw(raw_data, PIN_IO)) {
|
|
return BUS::phase_t::reselection;
|
|
} else {
|
|
return BUS::phase_t::selection;
|
|
}
|
|
}
|
|
|
|
// Bus busy phase
|
|
if (!GetPinRaw(raw_data, PIN_BSY)) {
|
|
return BUS::phase_t::busfree;
|
|
}
|
|
|
|
// Get target phase from bus signal line
|
|
int mci = GetPinRaw(raw_data, PIN_MSG) ? 0x04 : 0x00;
|
|
mci |= GetPinRaw(raw_data, PIN_CD) ? 0x02 : 0x00;
|
|
mci |= GetPinRaw(raw_data, PIN_IO) ? 0x01 : 0x00;
|
|
return GetPhase(mci);
|
|
}
|
|
|
|
//---------------------------------------------------------------------------
|
|
//
|
|
// Get the number of bytes for a command
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
int GPIOBUS::GetCommandByteCount(uint8_t opcode)
|
|
{
|
|
GPIO_FUNCTION_TRACE
|
|
|
|
if (opcode == 0x88 || opcode == 0x8A || opcode == 0x8F || opcode == 0x91 || opcode == 0x9E || opcode == 0x9F) {
|
|
return 16;
|
|
} else if (opcode == 0xA0) {
|
|
return 12;
|
|
} else if (opcode >= 0x20 && opcode <= 0x7D) {
|
|
return 10;
|
|
} else {
|
|
return 6;
|
|
}
|
|
}
|