mirror of https://github.com/akuker/RASCSI.git synced 2024-11-22 16:33:17 +00:00

History

akuker 0491930970 Create README.md		2020-10-24 22:49:23 -05:00
..
daisy_chain_board	Version 2.2 of the fullspec board with surface mount parts (#24 )	2020-08-22 20:08:43 -05:00
IIciCase	Create IIciCase.FCStd (#44 )	2020-10-16 20:47:32 -05:00
rascsi_1p5	Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name	2020-08-14 14:15:12 -05:00
rascsi_1p6	Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name	2020-08-14 14:15:12 -05:00
rascsi_2p1	Changed Bus Transceivers to 74LS641-1 per discussion on 68kmla forums	2020-08-03 09:57:53 -05:00
rascsi_2p2	Version 2.2 of the fullspec board with surface mount parts (#24 )	2020-08-22 20:08:43 -05:00
rascsi_2p3	Updated to correct part fields and descriptions. Removed conflicting mouser references	2020-09-22 09:00:48 -05:00
rascsi_tester	Version 2.2 of the fullspec board with surface mount parts (#24 )	2020-08-22 20:08:43 -05:00
README.md	Create README.md	2020-10-24 22:49:23 -05:00

RaSCSI Hardware

A high lever overview of the RaSCSI versions is available on the wiki: https://github.com/akuker/RASCSI/wiki/Hardware-Versions

Other things

IIciCase - A 3D printable case, developed in FreeCAD, that resembles a Mac IIci case. In order to use this case, you'll need to take the following into consideration:
- This case only works with a Raspberry Pi Zero, where it is mounted on TOP of the RaSCSI
- When you assemble the RaSCSI, you should use plain header pins instead of the box header for the 50-pin SCSI connector. If you don't, the header will be too wide to fit in the case
Daisy Chain Board - This board can stack on top of the RaSCSI to add a second SCSI port. This allows the RaSCSI to exist in the middle of the SCSI chain.
RaSCSI Tester - A prototype board that was intended to test new RaSCSIs to make sure they're working properly. This board was never debugged. Contact akuker if you are interested in doing something with it!