Macintosh-HW/RASCSI
1
0
Fork 0
mirror of https://github.com/akuker/RASCSI.git synced 2024-11-22 16:33:17 +00:00
Code Issues Projects Releases Wiki Activity
5c0d6fc7e9
RASCSI/hw
History
akuker b7db82ab71
Delete old, broken RaSCSI revision (#616)
2022-01-16 21:42:42 -08:00
..
daisy_chain_board Fix daisychain board files (#462) 2021-11-14 13:56:41 -06:00
IIciCase Create IIciCase.FCStd (#44) 2020-10-16 20:47:32 -05:00
loopback_tester Loopback tester pcb (#545) 2021-12-19 22:30:22 -06:00
pb_bracket Merge Hw 2p4 to develop (#109) 2021-06-08 19:06:29 -05:00
rascsi_1p5 Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name 2020-08-14 14:15:12 -05:00
rascsi_1p6 Created version 1.6 with issue #10 fixed. Renamed version 1.5 to a better folder name 2020-08-14 14:15:12 -05:00
rascsi_2p2 Version 2.2 of the fullspec board with surface mount parts (#24) 2020-08-22 20:08:43 -05:00
rascsi_2p3 Merge Hw 2p4 to develop (#109) 2021-06-08 19:06:29 -05:00
rascsi_2p4 Merge Hw 2p4 to develop (#109) 2021-06-08 19:06:29 -05:00
rascsi_zero_1p0 Generate PDF of schematic (#615) 2022-01-16 21:42:08 -08:00
README.md Create README.md 2020-10-24 22:49:23 -05:00

README.md

RaSCSI Hardware

A high lever overview of the RaSCSI versions is available on the wiki: https://github.com/akuker/RASCSI/wiki/Hardware-Versions

Other things

  • IIciCase - A 3D printable case, developed in FreeCAD, that resembles a Mac IIci case. In order to use this case, you'll need to take the following into consideration:
    • This case only works with a Raspberry Pi Zero, where it is mounted on TOP of the RaSCSI
    • When you assemble the RaSCSI, you should use plain header pins instead of the box header for the 50-pin SCSI connector. If you don't, the header will be too wide to fit in the case
  • Daisy Chain Board - This board can stack on top of the RaSCSI to add a second SCSI port. This allows the RaSCSI to exist in the middle of the SCSI chain.
  • RaSCSI Tester - A prototype board that was intended to test new RaSCSIs to make sure they're working properly. This board was never debugged. Contact akuker if you are interested in doing something with it!