mirror of https://github.com/akuker/RASCSI.git
60 lines
2.4 KiB
C++
60 lines
2.4 KiB
C++
//---------------------------------------------------------------------------
|
|
//
|
|
// SCSI Target Emulator RaSCSI Reloaded
|
|
// for Raspberry Pi
|
|
//
|
|
// Powered by XM6 TypeG Technology.
|
|
// Copyright (C) 2016-2020 GIMONS
|
|
// Copyright (C) 2022 akuker
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
|
|
#include "hal/board_type.h"
|
|
|
|
namespace board_type
|
|
{
|
|
|
|
// RaSCSI Adapter Aibom version
|
|
const Rascsi_Board_Type board_type_aibom = {
|
|
|
|
.connect_desc = "AIBOM PRODUCTS version", // Startup message
|
|
|
|
// Select signal control mode
|
|
.signal_control_mode = 2, // SCSI positive logic specification
|
|
|
|
// Control signal output logic
|
|
.act_on = active_high_low_e::ACTIVE_HIGH, // ACTIVE SIGNAL ON
|
|
.enb_on = active_high_low_e::ACTIVE_HIGH, // ENABLE SIGNAL ON
|
|
.ind_in = active_high_low_e::ACTIVE_LOW, // INITIATOR SIGNAL INPUT
|
|
.tad_in = active_high_low_e::ACTIVE_LOW, // TARGET SIGNAL INPUT
|
|
.dtd_in = active_high_low_e::ACTIVE_LOW, // DATA SIGNAL INPUT
|
|
|
|
// Control signal pin assignment (-1 means no control)
|
|
.pin_act = pi_physical_pin_e::PI_PHYS_PIN_07, // ACTIVE
|
|
.pin_enb = pi_physical_pin_e::PI_PHYS_PIN_11, // ENABLE
|
|
.pin_ind = pi_physical_pin_e::PI_PHYS_PIN_13, // INITIATOR CTRL DIRECTION
|
|
.pin_tad = pi_physical_pin_e::PI_PHYS_PIN_NONE, // TARGET CTRL DIRECTION
|
|
.pin_dtd = pi_physical_pin_e::PI_PHYS_PIN_12, // DATA DIRECTION
|
|
|
|
// SCSI signal pin assignment
|
|
.pin_dt0 = pi_physical_pin_e::PI_PHYS_PIN_31, // Data 0
|
|
.pin_dt1 = pi_physical_pin_e::PI_PHYS_PIN_32, // Data 1
|
|
.pin_dt2 = pi_physical_pin_e::PI_PHYS_PIN_33, // Data 2
|
|
.pin_dt3 = pi_physical_pin_e::PI_PHYS_PIN_36, // Data 3
|
|
.pin_dt4 = pi_physical_pin_e::PI_PHYS_PIN_35, // Data 4
|
|
.pin_dt5 = pi_physical_pin_e::PI_PHYS_PIN_38, // Data 5
|
|
.pin_dt6 = pi_physical_pin_e::PI_PHYS_PIN_37, // Data 6
|
|
.pin_dt7 = pi_physical_pin_e::PI_PHYS_PIN_40, // Data 7
|
|
.pin_dp = pi_physical_pin_e::PI_PHYS_PIN_29, // Data parity
|
|
.pin_atn = pi_physical_pin_e::PI_PHYS_PIN_15, // ATN
|
|
.pin_rst = pi_physical_pin_e::PI_PHYS_PIN_22, // RST
|
|
.pin_ack = pi_physical_pin_e::PI_PHYS_PIN_19, // ACK
|
|
.pin_req = pi_physical_pin_e::PI_PHYS_PIN_26, // REQ
|
|
.pin_msg = pi_physical_pin_e::PI_PHYS_PIN_21, // MSG
|
|
.pin_cd = pi_physical_pin_e::PI_PHYS_PIN_23, // CD
|
|
.pin_io = pi_physical_pin_e::PI_PHYS_PIN_16, // IO
|
|
.pin_bsy = pi_physical_pin_e::PI_PHYS_PIN_18, // BSY
|
|
.pin_sel = pi_physical_pin_e::PI_PHYS_PIN_24, // SEL
|
|
};
|
|
|
|
} |