RASCSI/cpp/hal/gpiobus.cpp

//---------------------------------------------------------------------------
//
//	SCSI Target Emulator RaSCSI Reloaded
//	for Raspberry Pi
//
//	Powered by XM6 TypeG Technology.
//	Copyright (C) 2016-2020 GIMONS
//
//	[ GPIO-SCSI bus ]
//
//---------------------------------------------------------------------------

#include "hal/gpiobus.h"
#include "hal/sbc_version.h"
#include "hal/systimer.h"
#include "shared/log.h"
#include <array>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/time.h>
#ifdef __linux__
#include <sys/epoll.h>
#endif

using namespace std;

bool GPIOBUS::Init(mode_e mode)
{
    GPIO_FUNCTION_TRACE

    // Save operation mode
    actmode = mode;

    return true;
}

//---------------------------------------------------------------------------
//
//	Receive command handshake
//
//---------------------------------------------------------------------------
int GPIOBUS::CommandHandShake(vector<uint8_t> &buf)
{
    GPIO_FUNCTION_TRACE
    // Only works in TARGET mode
    if (actmode != mode_e::TARGET) {
        return 0;
    }

    DisableIRQ();

    // Assert REQ signal
    SetREQ(ON);

    // Wait for ACK signal
    bool ret = WaitACK(ON);

    // Wait until the signal line stabilizes
    SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);

    // Get data
    buf[0] = GetDAT();

    // Disable REQ signal
    SetREQ(OFF);

    // Timeout waiting for ACK assertion
    if (!ret) {
        EnableIRQ();
        return 0;
    }

    // Wait for ACK to clear
    ret = WaitACK(OFF);

    // Timeout waiting for ACK to clear
    if (!ret) {
        EnableIRQ();
        return 0;
    }

    // The ICD AdSCSI ST, AdSCSI Plus ST and AdSCSI Micro ST host adapters allow SCSI devices to be connected
    // to the ACSI bus of Atari ST/TT computers and some clones. ICD-aware drivers prepend a $1F byte in front
    // of the CDB (effectively resulting in a custom SCSI command) in order to get access to the full SCSI
    // command set. Native ACSI is limited to the low SCSI command classes with command bytes < $20.
    // Most other host adapters (e.g. LINK96/97 and the one by Inventronik) and also several devices (e.g.
    // UltraSatan or GigaFile) that can directly be connected to the Atari's ACSI port also support ICD
    // semantics. I fact, these semantics have become a standard in the Atari world.

    // RaSCSI becomes ICD compatible by ignoring the prepended $1F byte before processing the CDB.
    if (buf[0] == 0x1F) {
        SetREQ(ON);

        ret = WaitACK(ON);

        SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);

        // Get the actual SCSI command
        buf[0] = GetDAT();

        SetREQ(OFF);

        if (!ret) {
            EnableIRQ();
            return 0;
        }

        WaitACK(OFF);

        if (!ret) {
            EnableIRQ();
            return 0;
        }
    }

    const int command_byte_count = GetCommandByteCount(buf[0]);
    if (command_byte_count == 0) {
        EnableIRQ();

        return 0;
    }

    int offset = 0;

    int bytes_received;
    for (bytes_received = 1; bytes_received < command_byte_count; bytes_received++) {
        ++offset;

        // Assert REQ signal
        SetREQ(ON);

        // Wait for ACK signal
        ret = WaitACK(ON);

        // Wait until the signal line stabilizes
        SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);

        // Get data
        buf[offset] = GetDAT();

        // Clear the REQ signal
        SetREQ(OFF);

        // Check for timeout waiting for ACK assertion
        if (!ret) {
            break;
        }

        // Wait for ACK to clear
        ret = WaitACK(OFF);

        // Check for timeout waiting for ACK to clear
        if (!ret) {
            break;
        }
    }

    EnableIRQ();

    return bytes_received;
}

//---------------------------------------------------------------------------
//
//	Data reception handshake
//
//---------------------------------------------------------------------------
int GPIOBUS::ReceiveHandShake(uint8_t *buf, int count)
{
    GPIO_FUNCTION_TRACE
    int i;

    // Disable IRQs
    DisableIRQ();

    if (actmode == mode_e::TARGET) {
        for (i = 0; i < count; i++) {
            // Assert the REQ signal
            SetREQ(ON);

            // Wait for ACK
            bool ret = WaitACK(ON);

            // Wait until the signal line stabilizes
            SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);

            // Get data
            *buf = GetDAT();

            // Clear the REQ signal
            SetREQ(OFF);

            // Check for timeout waiting for ACK signal
            if (!ret) {
                break;
            }

            // Wait for ACK to clear
            ret = WaitACK(OFF);

            // Check for timeout waiting for ACK to clear
            if (!ret) {
                break;
            }

            // Advance the buffer pointer to receive the next byte
            buf++;
        }
    } else {
        // Get phase
        Acquire();
        phase_t phase = GetPhase();

        for (i = 0; i < count; i++) {
            // Wait for the REQ signal to be asserted
            bool ret = WaitREQ(ON);

            // Check for timeout waiting for REQ signal
            if (!ret) {
                break;
            }

            // Phase error
            Acquire();
            if (GetPhase() != phase) {
                break;
            }

            // Wait until the signal line stabilizes
            SysTimer::SleepNsec(SCSI_DELAY_BUS_SETTLE_DELAY_NS);

            // Get data
            *buf = GetDAT();

            // Assert the ACK signal
            SetACK(ON);

            // Wait for REQ to clear
            ret = WaitREQ(OFF);

            // Clear the ACK signal
            SetACK(OFF);

            // Check for timeout waiting for REQ to clear
            if (!ret) {
                break;
            }

            // Phase error
            Acquire();
            if (GetPhase() != phase) {
                break;
            }

            // Advance the buffer pointer to receive the next byte
            buf++;
        }
    }

    // Re-enable IRQ
    EnableIRQ();

    // Return the number of bytes received
    return i;
}

//---------------------------------------------------------------------------
//
//	Data transmission handshake
//
//---------------------------------------------------------------------------
int GPIOBUS::SendHandShake(uint8_t *buf, int count, int delay_after_bytes)
{
    GPIO_FUNCTION_TRACE
    int i;

    // Disable IRQs
    DisableIRQ();

    if (actmode == mode_e::TARGET) {
        for (i = 0; i < count; i++) {
            if (i == delay_after_bytes) {
                LOGTRACE("%s DELAYING for %dus after %d bytes", __PRETTY_FUNCTION__, SCSI_DELAY_SEND_DATA_DAYNAPORT_US,
                         (int)delay_after_bytes)
                SysTimer::SleepUsec(SCSI_DELAY_SEND_DATA_DAYNAPORT_US);
            }

            // Set the DATA signals
            SetDAT(*buf);

            // Wait for ACK to clear
            bool ret = WaitACK(OFF);

            // Check for timeout waiting for ACK to clear
            if (!ret) {
                break;
            }

            // Already waiting for ACK to clear

            // Assert the REQ signal
            SetREQ(ON);

            // Wait for ACK
            ret = WaitACK(ON);

            // Clear REQ signal
            SetREQ(OFF);

            // Check for timeout waiting for ACK to clear
            if (!ret) {
                break;
            }

            // Advance the data buffer pointer to receive the next byte
            buf++;
        }

        // Wait for ACK to clear
        WaitACK(OFF);
    } else {
        // Get Phase
        Acquire();
        phase_t phase = GetPhase();

        for (i = 0; i < count; i++) {
            if (i == delay_after_bytes) {
                LOGTRACE("%s DELAYING for %dus after %d bytes", __PRETTY_FUNCTION__, SCSI_DELAY_SEND_DATA_DAYNAPORT_US,
                         (int)delay_after_bytes)
                SysTimer::SleepUsec(SCSI_DELAY_SEND_DATA_DAYNAPORT_US);
            }

            // Set the DATA signals
            SetDAT(*buf);

            // Wait for REQ to be asserted
            bool ret = WaitREQ(ON);

            // Check for timeout waiting for REQ to be asserted
            if (!ret) {
                break;
            }

            // Phase error
            Acquire();
            if (GetPhase() != phase) {
                break;
            }

            // Already waiting for REQ assertion

            // Assert the ACK signal
            SetACK(ON);

            // Wait for REQ to clear
            ret = WaitREQ(OFF);

            // Clear the ACK signal
            SetACK(OFF);

            // Check for timeout waiting for REQ to clear
            if (!ret) {
                break;
            }

            // Phase error
            Acquire();
            if (GetPhase() != phase) {
                break;
            }

            // Advance the data buffer pointer to receive the next byte
            buf++;
        }
    }

    // Re-enable IRQ
    EnableIRQ();

    // Return number of transmissions
    return i;
}

//---------------------------------------------------------------------------
//
//	SEL signal event polling
//
//---------------------------------------------------------------------------
bool GPIOBUS::PollSelectEvent()
{
#ifndef USE_SEL_EVENT_ENABLE
    return false;
#else
    GPIO_FUNCTION_TRACE
    LOGTRACE("%s", __PRETTY_FUNCTION__)
    errno         = 0;
    int prev_mode = -1;
    if (SBC_Version::IsBananaPi()) {
        prev_mode = GetMode(BPI_PIN_SEL);
        SetMode(BPI_PIN_SEL, GPIO_IRQ_IN);
    }

    if (epoll_event epev; epoll_wait(epfd, &epev, 1, -1) <= 0) {
        LOGWARN("%s epoll_wait failed", __PRETTY_FUNCTION__)
        return false;
    }

    if (gpioevent_data gpev; read(selevreq.fd, &gpev, sizeof(gpev)) < 0) {
        LOGWARN("%s read failed", __PRETTY_FUNCTION__)
        return false;
    }

    if (SBC_Version::IsBananaPi()) {
        SetMode(BPI_PIN_SEL, prev_mode);
    }
    return true;
#endif
}

//---------------------------------------------------------------------------
//
//	Cancel SEL signal event
//
//---------------------------------------------------------------------------
void GPIOBUS::ClearSelectEvent()
{
    GPIO_FUNCTION_TRACE
}

//---------------------------------------------------------------------------
//
//	Wait for signal change
//
//---------------------------------------------------------------------------
bool GPIOBUS::WaitSignal(int pin, bool ast)
{
    // Get current time
    uint32_t now = SysTimer::GetTimerLow();

    // Calculate timeout (3000ms)
    uint32_t timeout = 3000 * 1000;

    do {
        // Immediately upon receiving a reset
        Acquire();
        if (GetRST()) {
            return false;
        }

        // Check for the signal edge
        if (GetSignal(pin) == ast) {
            return true;
        }
    } while ((SysTimer::GetTimerLow() - now) < timeout);

    // We timed out waiting for the signal
    return false;
}