English fork of the Japanese RaSCSI project. RaSCSI allows a Raspberry Pi to function as emulated SCSI devices (hard disk, CD-ROM, and others) for vintage SCSI-based computers and devices.
* Making saving and loading config files work with protobuf
* Formatted the Status column, and fixed the available ID logic
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Better handling of device status
* Updated parameter handling
* Updated setting default interfaces
* Revert "Updated setting default interfaces"
This reverts commit 210abc775d.
* Revert "Updated parameter handling"
This reverts commit 35302addd5.
* Abort with a 404 if rascsi is not running. Use any protobuf response to determine whether rascsi is running (should hardly be required anymore due to the other change, but just in case).
* Move id reservation back into __main__
* Remove check for device type when validating Removed image
* Leverage device property data for better status messages
* Remove redundant string sanitation when reading config csv file
* Clean up device list generation
* Cleanup
* Remove duplicates before building valid scsi id list
* Fully translated cfilesystem.h code comments to English; partially translated cfilesystem.cpp
* rascsi supports reserving IDs
* Updated help message
* Replaced BOOL by bool
* Logging update
* Logging update
* Cleanup
* Restructure the easyinstall.sh script to combine the install/update flows, and disallow installing the webapp by itself
* Remove redundant steps handled in Makefile
* Add the functionality to specify connect_type through a parameter
* Add validation to the argument parser allowing only STANDARD and FULLSPEC as options
* Complete translation of code comments for cfilesystem.h; partial translation for cfilesystem.cpp
* Cleanup
* Merge parts of the Network Assistant script by sonique6784; fix the run_choice startup parameter
* Improve on the network setup messages
* Fix routing address
* Add checks for previous configuration; cleanup
* Cleanup
* Remove redundant step in wired setup. Improve messages.
* Cleanup
* Added default parameters to device properties
* Return parameters a device was set up with
* Add flows for configuring custom network settings; adopting some logic by sonique6784
* Improved device initialization
* Updated default parameter handling
* Updated default parameter handling
* Fixed typo
* Comment updates
* Comment update
* Make iso generation work again, and add error handling to urllib actions
* Manage default parameters in the respective device
* Print available network interfaces. Clean up step and improve descriptive messages.
* Make the script clean up previous configurations
* Make the script only show relevant interfaces
* Partial translation of cfilesystem.cpp
* Do not pass empty parameter string
* Added supports_params flag
* Completely translate code comments in cfilesystem.cpp
* Show rascsi-web status after installing
* Refactoring
* Made comparisons more consistent
* Updated error handling
* Updated exception handling
* Made comparisons more consistent
* Updated error handling
* Overlooked code comment translation
* Renaming
* Better error handling for socket connection
* Disable two NEC hd image types due to issue#232
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Better handling of removable disks in the web ui
* Added stoppable property and stopped status
* Made MO stoppable
* Removed duplicate code
* Removed duplicate code
* Copy read-only property
* Renaming
* Add an assistant for reserving scsi ids
* Don't show action if no device attached
* Implement a device_info app path, and cut down on device columns always shown
* Cleanup
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Made disk_t private
* Made some data structures private
* Fixed ARM compile issue
* Fast forward instead of rebase existing git repo
* Fixed ctapdriver initialization issue
* Reset read-only status when opening an image file
* Cleanup
* Cleanup
* Made logging more consistent
* Updated log level
* Cleanup
* Log load/eject on error level for testing
* Revert "Log load/eject on error level for testing"
This reverts commit d35a15ea8e.
* Assume drive is not ready after having been stopped
* Updated status handling
* Make the csv config files store all relevant device data for reading
* Read 9 column csv config files
* Fixed typo
* Rebuild manpage
* Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header)
* Removed unused code
* Enum data type update
* Removed duplicate range check
* Removed duplicate code
* Removed more duplicate code
* Logging update
* SCCD sector size was not meant to be configurable
* Better error handling for csv reading and writing
* Updated configurable sector size properties
* Removed assertion
* Improved error handling
* Updated error handling
* Re-added special error handling only relevant for SASI
* Added TODOs
* Comment update
* Added override modifier
* Removed obsolete debug flag (related code was not called)
* Comment and logging updates
* Removed obsolete try/catch
* Revert "Removed obsolete try/catch"
This reverts commit 39ca12d8b1.
* Comment update
* Removed duplicate code
* Updated error messages, use more foreach loops
* Avoid storing RaSCSI generated product info in config file
* Updated logging
* Logging update
* Save config files in json instead of csv
* Fix bugs with json config loading
* Refactoring & remove unused code
* Refactoring
* Display upper case file endings in file management list
* Only show product vendor for non-RaSCSI devices in the device list
* Translate code comment
* Refactoring
* Fix bad identation
* Improve valid file extension handling
* Add validation when attaching removable media
* Display valid file endings under the file list
* Cleanup
* Don't store 0 block size
* Fix indentation
* Read and write config files in key:pair format
* Add section for controlling logging
* README update
* Added block_count
* Cleanup, fix typos
* Support attaching CD-ROM with custom block size
* Evaluate block size when inserting a media
* rasctl display capacity if available
* Info message update
* Use kwargs for device attachment
* Fix bugs in attach_image kwargs; make config file more readable
* POC for attaching device with profile
* Only list product types valid for the particular image file
* Perform validation of HDD image size based on the product profile
* Implement sidecar config files for drive images.
* Added missing product name to NEC vital product data
* MO block size depends on capacity only
* Better error handling for device sidecar config loading
* Extended property/status display
* Property display update
* Updated error handling
* Handle image sizes in bytes internally
* Revert change
* Resolve bad merge
Co-authored-by: Uwe Seimet <Uwe.Seimet@seimet.de>
RaSCSI is a virtual SCSI device emulator that runs on a Raspberry Pi. It runs in userspace, and can emulate several SCSI devices at one time. There is a control interface to attach / detach drives during runtime, as well as insert and eject removable media. This project is aimed at users of vintage Macintosh and Atari computers from the 1980's and 1990's.
Please check out the full story with much more detail on the wiki!
The master branch should always reflect the contents of the last stable release
The develop branch should contain the latest tested & approved updates. Pull requests should be used to merge changes into develop.
The rest of the feature branches are for developing new features
A tag will be created for each "release". The releases will be named . (for the first release of the month). Hot fixes, if necessary, will be released as ... For example, the first release in January 2021 will be release "21.01". If a hot-fix is needed for this release, the first hotfix will be "21.01.1".
Typically, releases will only be planned every few months.
8a3642bf9a
