mirror of
https://github.com/akuker/RASCSI.git
synced 2024-11-25 20:33:35 +00:00
ad5eae93e7
* Allow 'empty' ModeSelect6 tl;dr Treat a computed length of 0 as `has_valid_page_code`. Details: The SRM console (aka 'BIOS') of DEC Alpha sends an empty ModeSelect6 with the following data: ~~~ ModeSelect6, CDB $151000000c00 ~~~ That makes 12 byte(s) as follows ~~~ 0 1 2 3 4 5 6 7 8 9 10 11 00 00 00 08 00 00 00 00 00 00 02 00 ~~~ decoding it (accoring to [1], Section 8.3.3, Table 94) gives us Mode Data Length 0 Medium Type 0 Device-specific 0 Block desc len 8 Density Code 0 Number of blks 0 Reserved 0 Block length 512 `scsi_command_util::ModeSelect` computes ~~~ offset = 4 + buf[3]; ~~~ giving 12 and ~~~ length -= offset; ~~~ giving 0. Thus it never enters the `while` loop and `has_valid_page_code` stays `false`, raising an error. [1] [Small Computer System Interface - 2 rev 10L.pdf](https://dn790004.ca.archive.org/0/items/SCSISpecificationDocumentsSCSIDocuments/Small%20Computer%20System%20Interface%20-%202%20rev%2010L.pdf) Signed-off-by: Klaus Kämpf <kkaempf@gmail.com> * Allow ModeSelect with page code 1 OpenVMS Alpha (the operating system, not the SRM BIOS) uses ModeSelect6 with a page code of 1. The semantics are unknown, just accepting it works for me. Signed-off-by: Klaus Kämpf <kkaempf@gmail.com> * Fix page length computation in ModeSelect tl;dr The 'skip to next ModeSelect page' computation was off-by-one, either not taking the page code itself into account or missing the fact that the page length is given as `n - 1`. Fix: Add 1 to the computed length. Details: OpenVMS Alpha sends a ModeSelect6 as follows ~~~ command: ModeSelect6, CDB $151000001900 payload: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 00 00 00 08 00 00 00 00 00 00 02 00 01 0a 24 00 00 00 00 00 00 00 00 00 00 ~~~ This translates to (accoring to [1], Section 8.3.3) ~~~ Mode Data Length 0 Medium Type 0 Device-specific 0 Block desc len 8 ~~~ with the following offset / length computation _before_ the `while` loop ~~~ offset = 12 length = 13 ~~~ The first payload section is ~~~ 4 5 6 7 8 9 10 11 00 00 00 00 00 00 02 00 ~~~ translating to ~~~ Density Code 0 Number of blks 0 Reserved 0 Block length 0x200 512 ~~~ Then follows a pagecode 1 as ~~~ 12 13 14 15 16 17 18 19 20 21 22 23 24 01 0a 24 00 00 00 00 00 00 00 00 00 00 ~~~ translating to ~~~~ Page code 1 Page length -1 10 Mode parameters 24 00 00 00 00 00 00 00 00 00 00 ~~~ computing (inside the `while` loop, as `// Advance to the next page`) ~~~ size = 10 + 2 = 12 ~~~ followed by new `offset` and `length` values ~~~ offset = 25 length = 1 ~~~ So it stays in the `while` loop (and has a larger-than-buffer `offset` value) Signed-off-by: Klaus Kämpf <kkaempf@gmail.com>
238 lines
6.9 KiB
C++
238 lines
6.9 KiB
C++
//---------------------------------------------------------------------------
|
|
//
|
|
// SCSI Target Emulator PiSCSI
|
|
// for Raspberry Pi
|
|
//
|
|
// Copyright (C) 2022 Uwe Seimet
|
|
//
|
|
//---------------------------------------------------------------------------
|
|
|
|
#include "mocks.h"
|
|
#include "shared/scsi.h"
|
|
#include "shared/piscsi_exceptions.h"
|
|
#include "devices/scsi_command_util.h"
|
|
|
|
using namespace scsi_command_util;
|
|
|
|
TEST(ScsiCommandUtilTest, ModeSelect6)
|
|
{
|
|
const int LENGTH = 26;
|
|
|
|
vector<int> cdb(6);
|
|
vector<uint8_t> buf(LENGTH);
|
|
|
|
// PF (vendor-specific parameter format) must not fail but be ignored
|
|
cdb[1] = 0x00;
|
|
ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 0);
|
|
|
|
cdb[0] = 0x15;
|
|
// PF (standard parameter format)
|
|
cdb[1] = 0x10;
|
|
// Request 512 bytes per sector
|
|
buf[9] = 0x00;
|
|
buf[10] = 0x02;
|
|
buf[11] = 0x00;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 256); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Requested sector size does not match current sector size";
|
|
|
|
// Page 0
|
|
buf[12] = 0x00;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Unsupported page 0 was not rejected";
|
|
|
|
// Page 1
|
|
buf[12] = 0x01;
|
|
EXPECT_NO_THROW(ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 512))
|
|
<< "Page 1 is supported";
|
|
|
|
// Page 3 (Format Device Page)
|
|
buf[12] = 0x03;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Requested sector size does not match current sector size";
|
|
|
|
// Match the requested to the current sector size
|
|
buf[24] = 0x02;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH - 1, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Not enough command parameters";
|
|
|
|
// check length computation
|
|
buf[3] = 8;
|
|
buf[10] = 2;
|
|
buf[12] = 1;
|
|
buf[13] = 10;
|
|
buf[14] = 0x24;
|
|
buf[24] = 0;
|
|
EXPECT_NO_THROW(ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, LENGTH, 512))
|
|
<< "Multi-page length computation";
|
|
|
|
// check length computation
|
|
buf[3] = 8;
|
|
buf[10] = 12;
|
|
buf[12] = 0;
|
|
buf[13] = 0;
|
|
buf[14] = 0;
|
|
buf[24] = 0;
|
|
EXPECT_NO_THROW(ModeSelect(scsi_command::eCmdModeSelect6, cdb, buf, 12, 512))
|
|
<< "Empty ModeSelect6";
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, ModeSelect10)
|
|
{
|
|
const int LENGTH = 30;
|
|
|
|
vector<int> cdb(10);
|
|
vector<uint8_t> buf(LENGTH);
|
|
|
|
// PF (vendor-specific parameter format) must not fail but be ignored
|
|
cdb[1] = 0x00;
|
|
ModeSelect(scsi_command::eCmdModeSelect10, cdb, buf, LENGTH, 0);
|
|
|
|
// PF (standard parameter format)
|
|
cdb[1] = 0x10;
|
|
// Request 512 bytes per sector
|
|
buf[13] = 0x00;
|
|
buf[14] = 0x02;
|
|
buf[15] = 0x00;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect10, cdb, buf, LENGTH, 256); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Requested sector size does not match current sector size";
|
|
|
|
// Page 0
|
|
buf[16] = 0x00;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect10, cdb, buf, LENGTH, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Unsupported page 0 was not rejected";
|
|
|
|
// Page 3 (Format Device Page)
|
|
buf[16] = 0x03;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect10, cdb, buf, LENGTH, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Requested sector size does not match current sector size";
|
|
|
|
// Match the requested to the current sector size
|
|
buf[28] = 0x02;
|
|
EXPECT_THAT([&] { ModeSelect(scsi_command::eCmdModeSelect10, cdb, buf, LENGTH - 1, 512); },
|
|
Throws<scsi_exception>(AllOf(
|
|
Property(&scsi_exception::get_sense_key, sense_key::illegal_request),
|
|
Property(&scsi_exception::get_asc, asc::invalid_field_in_parameter_list))))
|
|
<< "Not enough command parameters";
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, EnrichFormatPage)
|
|
{
|
|
const int SECTOR_SIZE = 512;
|
|
|
|
map<int, vector<byte>> pages;
|
|
vector<byte> format_page(24);
|
|
pages[3] = format_page;
|
|
|
|
EnrichFormatPage(pages, false, SECTOR_SIZE);
|
|
format_page = pages[3];
|
|
EXPECT_EQ(byte{0}, format_page[12]);
|
|
EXPECT_EQ(byte{0}, format_page[13]);
|
|
|
|
EnrichFormatPage(pages, true, SECTOR_SIZE);
|
|
format_page = pages[3];
|
|
EXPECT_EQ(byte{SECTOR_SIZE >> 8}, format_page[12]);
|
|
EXPECT_EQ(byte{0}, format_page[13]);
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, AddAppleVendorModePage)
|
|
{
|
|
map<int, vector<byte>> pages;
|
|
vector<byte> vendor_page(30);
|
|
pages[48] = vendor_page;
|
|
|
|
AddAppleVendorModePage(pages, true);
|
|
vendor_page = pages[48];
|
|
EXPECT_EQ(byte{0}, vendor_page[2]);
|
|
|
|
AddAppleVendorModePage(pages, false);
|
|
vendor_page = pages[48];
|
|
EXPECT_STREQ("APPLE COMPUTER, INC ", (const char *)&vendor_page[2]);
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, GetInt16)
|
|
{
|
|
vector<uint8_t> b = { 0xfe, 0xdc };
|
|
EXPECT_EQ(0xfedc, GetInt16(b, 0));
|
|
|
|
vector<int> v = { 0x12, 0x34 };
|
|
EXPECT_EQ(0x1234, GetInt16(v, 0));
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, GetInt24)
|
|
{
|
|
vector<int> v = { 0x12, 0x34, 0x56 };
|
|
EXPECT_EQ(0x123456, GetInt24(v, 0));
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, GetInt32)
|
|
{
|
|
vector<int> v = { 0x12, 0x34, 0x56, 0x78 };
|
|
EXPECT_EQ(0x12345678, GetInt32(v, 0));
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, GetInt64)
|
|
{
|
|
vector<int> v = { 0x12, 0x34, 0x56, 0x78, 0x87, 0x65, 0x43, 0x21 };
|
|
EXPECT_EQ(0x1234567887654321, GetInt64(v, 0));
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, SetInt16)
|
|
{
|
|
vector<byte> v(2);
|
|
SetInt16(v, 0, 0x1234);
|
|
EXPECT_EQ(byte{0x12}, v[0]);
|
|
EXPECT_EQ(byte{0x34}, v[1]);
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, SetInt32)
|
|
{
|
|
vector<uint8_t> buf(4);
|
|
SetInt32(buf, 0, 0x12345678);
|
|
EXPECT_EQ(0x12, buf[0]);
|
|
EXPECT_EQ(0x34, buf[1]);
|
|
EXPECT_EQ(0x56, buf[2]);
|
|
EXPECT_EQ(0x78, buf[3]);
|
|
|
|
vector<byte> v(4);
|
|
SetInt32(v, 0, 0x12345678);
|
|
EXPECT_EQ(byte{0x12}, v[0]);
|
|
EXPECT_EQ(byte{0x34}, v[1]);
|
|
EXPECT_EQ(byte{0x56}, v[2]);
|
|
EXPECT_EQ(byte{0x78}, v[3]);
|
|
}
|
|
|
|
TEST(ScsiCommandUtilTest, SetInt64)
|
|
{
|
|
vector<uint8_t> buf(8);
|
|
SetInt64(buf, 0, 0x1234567887654321);
|
|
EXPECT_EQ(0x12, buf[0]);
|
|
EXPECT_EQ(0x34, buf[1]);
|
|
EXPECT_EQ(0x56, buf[2]);
|
|
EXPECT_EQ(0x78, buf[3]);
|
|
EXPECT_EQ(0x87, buf[4]);
|
|
EXPECT_EQ(0x65, buf[5]);
|
|
EXPECT_EQ(0x43, buf[6]);
|
|
EXPECT_EQ(0x21, buf[7]);
|
|
}
|