RASCSI/doc/rascsi_man_page.txt
Uwe Seimet ba8ad2e7f5
Fixed missing media change handling (#690)
* Remember media change

* Added comment

* Added TODO

* Updated SCSI level for host services to SPC-5

* Manpage update
2022-02-21 21:01:17 +01:00

158 lines
7.2 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
!! ------ The native file is rascsi.1. Re-run 'make docs' after updating\n\n
rascsi(1) General Commands Manual rascsi(1)
NAME
rascsi - Emulates SCSI devices using the Raspberry Pi GPIO pins
SYNOPSIS
rascsi [-F[u00AE] FOLDER] [-L[u00AE] LOG_LEVEL] [-P[u00AE] ACCESS_TO
KEN_FILE] [-R SCAN_DEPTH] [-h] [-n VENDOR:PRODUCT:REVISION] [-p[u00AE]
PORT] [-r RESERVED_IDS] [-n TYPE] [-v] [-z LOCALE] [-IDn:[u] FILE]
[-HDn[:u] FILE]...
DESCRIPTION
rascsi Emulates SCSI devices using the Raspberry Pi GPIO pins.
In the arguments to RaSCSI, one or more SCSI (-IDn[:u]) or SASI
(-HDn[:u]) devices can be specified. The number (n) after the ID or HD
identifier specifies the ID number for that device. The optional number
(u) specifies the LUN (logical unit) for that device. The default LUN
is 0. For SCSI: The ID is limited from 0-7. However, typically SCSI ID
7 is reserved for the "initiator" (the host computer). The LUN is lim
ited from 0-31. Note that SASI is considered rare and only used on very
early Sharp X68000 computers.
RaSCSI will determine the type of device based upon the file extension
of the FILE argument.
hdf: SASI Hard Disk image (XM6 SASI HD image - typically only used
with X68000)
hds: SCSI Hard Disk image (generic, non-removable)
hdr: SCSI Hard Disk image (generic, removable)
hdn: SCSI Hard Disk image (NEC GENUINE)
hdi: SCSI Hard Disk image (Anex86 HD image)
nhd: SCSI Hard Disk image (T98Next HD image)
hda: SCSI Hard Disk image (APPLE GENUINE - typically used with Mac
SCSI emulation)
mos: SCSI Magneto-optical image (XM6 SCSI MO image - typically only
used with X68000)
iso: SCSI CD-ROM image (ISO 9660 image)
For example, if you want to specify an Apple-compatible HD image on ID
0, you can use the following command:
sudo rascsi -ID0 /path/to/drive/hdimage.hda
Once RaSCSI starts, it will open a socket (default port is 6868) to al
low external management commands. If another process is using the
rascsi port, RaSCSI will terminate, since it is likely another instance
of RaSCSI. Once RaSCSI has initialized, the rasctl utility can be used
to send commands.
To quit RaSCSI, press Control + C. If it is running in the background,
you can kill it using an INT signal.
OPTIONS
-b BLOCK_SIZE
The optional block size. For SCSI drives 512, 1024, 2048 or 4096
bytes, default size is 512 bytes. For SASI drives 256 or 1024
bytes, default is 256 bytes.
-F FOLDER
The default folder for image files. For files in this folder no
absolute path needs to be specified. The initial default folder
is '~/images'.
-L LOG_LEVEL
The rascsi log level (trace, debug, info, warn, err, critical,
off). The default log level is 'info'.
-P ACCESS_TOKEN_FILE
Enable authentication and read the access token from the speci
fied file. The access token file must be owned by root and must
be readable by root only.
-R SCAN_DEPTH
Scan for image files recursively, up to a depth of SCAN_DEPTH.
Depth 0 means to ignore any folders within the default image
filder. Be careful when using this option with many sub-folders
in the default image folder. The default depth is 1.
-h Show a help page.
-n VENDOR:PRODUCT:REVISION
Set the vendor, product and revision for the device, to be re
turned with the INQUIRY data. A complete set of name components
must be provided. VENDOR may have up to 8, PRODUCT up to 16, RE
VISION up to 4 characters. Padding with blanks to the maxium
length is automatically applied. Once set the name of a device
cannot be changed.
-p PORT
The rascsi server port, default is 6868.
-r RESERVED_IDS
Comma-separated list of IDs to reserve. Pass an empty list in
order to not reserve anything. -p TYPE The optional case-insen
sitive device type (SAHD, SCHD, SCRM, SCCD, SCMO, SCBR, SCDP,
SCLP, SCHS). If no type is specified for devices that support an
image file, rascsi tries to derive the type from the file exten
sion.
-v Display the rascsi version.
-z LOCALE
Overrides the default locale for client-faces error messages.
The client can override the locale.
-IDn[:u] FILE
n is the SCSI ID number (0-7). u (0-31) is the optional LUN
(logical unit). The default LUN is 0.
FILE is the name of the image file to use for the SCSI device.
For devices that do not support an image file (SCBR, SCDP, SCLP,
SCHS) the filename may have a special meaning or a dummy name
can be provided. For SCBR and SCDP it is an optioinal priori
tized list of network interfaces, an optional IP address and
netmask, e.g. "interfaces=eth0,eth1,wlan0:inet=10.10.20.1/24".
For SCLP it is the print command to be used and a reservation
timeout in seconds, e.g. "cmd=lp -oraw %f:timeout=60".
-HDn[:u] FILE
n is the SASI ID number (0-15). The effective SASI ID is calcu
lated as n/2, the effective SASI LUN is calculated is the re
mainder of n/2. Alternatively the n:u syntax can be used, where
ns is the SASI ID (0-7) and u the LUN (0-1).
FILE is the name of the image file to use for the SASI device.
Note: SASI usage is rare, and is typically limited to early Unix
workstations and Sharp X68000 systems.
EXAMPLES
Launch RaSCSI with no emulated drives attached:
rascsi
Launch RaSCSI with an Apple hard drive image as ID 0 and a CD-ROM as ID
2
rascsi -ID0 /path/to/harddrive.hda -ID2 /path/to/cdimage.iso
Launch RaSCSI with a removable SCSI drive image as ID 0 and the raw de
vice file /dev/hdb (e.g. a USB stick) and a DaynaPort network adapter
as ID 6:
rascsi -ID0 -t scrm /dev/hdb -ID6 -t scdp daynaport
To create an empty, 100MB HD image, use the following command:
dd if=/dev/zero of=/path/to/newimage.hda bs=512 count=204800
In case the fallocate command is available a much faster alternative to
the dd command is:
fallocate -l 104857600 /path/to/newimage.hda
SEE ALSO
rasctl(1), scsimon(1), rasdump(1), sasidump(1)
Full documentation is available at:
<https://www.github.com/akuker/RASCSI/wiki/>
rascsi(1)