RASCSI/cpp/controllers/scsi_controller.cpp
Daniel Markstedt 52c2aa474f
Rebrand project to PiSCSI (#1016)
* Rebrand project to PiSCSI
- rascsi ->piscsi
- rasctl -> scsictl
- rasdump -> scsidump
- ras* -> piscsi* (rasutil -> piscsi_util, etc.)

* Refined the formatting and wording of the app startup banner
* Kept some references to rascsi and rasctl where backwards compatibility is concerned
* Point to the new github repo URL

Co-authored-by: nucleogenic <nr@nucleogenic.com>
Co-authored-by: Uwe Seimet <Uwe.Seimet@seimet.de>
2022-12-05 09:58:23 -08:00

1049 lines
22 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//---------------------------------------------------------------------------
//
// SCSI Target Emulator PiSCSI
// for Raspberry Pi
//
// Copyright (C) 2001-2006 (ytanaka@ipc-tokai.or.jp)
// Copyright (C) 2014-2020 GIMONS
// Copyright (C) akuker
// Copyright (C) 2022 Uwe Seimet
//
// Licensed under the BSD 3-Clause License.
// See LICENSE file in the project root folder.
//
//---------------------------------------------------------------------------
#include "shared/piscsi_exceptions.h"
#include "hal/gpiobus.h"
#include "hal/systimer.h"
#include "devices/interfaces/byte_writer.h"
#include "devices/mode_page_device.h"
#include "devices/disk.h"
#include "scsi_controller.h"
#include <sstream>
#include <iomanip>
#ifdef __linux__
#include <linux/if_tun.h>
#endif
using namespace scsi_defs;
ScsiController::ScsiController(shared_ptr<ControllerManager> controller_manager, int target_id)
: AbstractController(controller_manager, target_id, LUN_MAX)
{
logger.SetIdAndLun(target_id, -1);
// The initial buffer size will default to either the default buffer size OR
// the size of an Ethernet message, whichever is larger.
AllocateBuffer(std::max(DEFAULT_BUFFER_SIZE, ETH_FRAME_LEN + 16 + ETH_FCS_LEN));
}
void ScsiController::Reset()
{
AbstractController::Reset();
execstart = 0;
identified_lun = -1;
scsi.atnmsg = false;
scsi.msc = 0;
scsi.msb = {};
SetByteTransfer(false);
}
phase_t ScsiController::Process(int id)
{
GetBus().Acquire();
if (GetBus().GetRST()) {
logger.Warn("RESET signal received!");
Reset();
GetBus().Reset();
return GetPhase();
}
initiator_id = id;
try {
ProcessPhase();
}
catch(const scsi_exception&) {
// Any exception should have been handled during the phase processing
logger.Error("Unhandled SCSI error, resetting controller and bus and entering bus free phase");
Reset();
GetBus().Reset();
BusFree();
}
return GetPhase();
}
void ScsiController::BusFree()
{
if (!IsBusFree()) {
logger.Trace("Bus free phase");
SetPhase(phase_t::busfree);
GetBus().SetREQ(false);
GetBus().SetMSG(false);
GetBus().SetCD(false);
GetBus().SetIO(false);
GetBus().SetBSY(false);
// Initialize status and message
SetStatus(status::GOOD);
SetMessage(0x00);
// Initialize ATN message reception status
scsi.atnmsg = false;
identified_lun = -1;
SetByteTransfer(false);
if (shutdown_mode != piscsi_shutdown_mode::NONE) {
// Prepare the shutdown by flushing all caches
for (const auto& device : GetControllerManager()->GetAllDevices()) {
device->FlushCache();
}
}
// When the bus is free PiSCSI or the Pi may be shut down.
// This code has to be executed in the bus free phase and thus has to be located in the controller.
switch(shutdown_mode) {
case piscsi_shutdown_mode::STOP_PISCSI:
logger.Info("PiSCSI shutdown requested");
exit(EXIT_SUCCESS);
break;
case piscsi_shutdown_mode::STOP_PI:
logger.Info("Raspberry Pi shutdown requested");
if (system("init 0") == -1) {
logger.Error("Raspberry Pi shutdown failed: " + string(strerror(errno)));
}
break;
case piscsi_shutdown_mode::RESTART_PI:
logger.Info("Raspberry Pi restart requested");
if (system("init 6") == -1) {
logger.Error("Raspberry Pi restart failed: " + string(strerror(errno)));
}
break;
default:
break;
}
return;
}
// Move to selection phase
if (GetBus().GetSEL() && !GetBus().GetBSY()) {
Selection();
}
}
void ScsiController::Selection()
{
if (!IsSelection()) {
// A different device controller was selected
if (int id = 1 << GetTargetId(); (static_cast<int>(GetBus().GetDAT()) & id) == 0) {
return;
}
// Abort if there is no LUN for this controller
if (!GetLunCount()) {
return;
}
logger.Trace("Selection phase");
SetPhase(phase_t::selection);
// Raise BSY and respond
GetBus().SetBSY(true);
return;
}
// Selection completed
if (!GetBus().GetSEL() && GetBus().GetBSY()) {
// Message out phase if ATN=1, otherwise command phase
if (GetBus().GetATN()) {
MsgOut();
} else {
Command();
}
}
}
void ScsiController::Command()
{
if (!IsCommand()) {
logger.Trace("Command phase");
SetPhase(phase_t::command);
GetBus().SetMSG(false);
GetBus().SetCD(true);
GetBus().SetIO(false);
const int actual_count = GetBus().CommandHandShake(GetBuffer());
if (actual_count == 0) {
stringstream s;
s << "Received unknown command: $" << setfill('0') << setw(2) << hex << GetBuffer()[0];
logger.Trace(s.str());
Error(sense_key::ILLEGAL_REQUEST, asc::INVALID_COMMAND_OPERATION_CODE);
return;
}
const int command_byte_count = BUS::GetCommandByteCount(GetBuffer()[0]);
// If not able to receive all, move to the status phase
if (actual_count != command_byte_count) {
stringstream s;
s << "Command byte count mismatch for command $" << setfill('0') << setw(2) << hex << GetBuffer()[0];
logger.Error(s.str() + ": expected " + to_string(command_byte_count) + " bytes, received"
+ to_string(actual_count) + " byte(s)");
Error(sense_key::ABORTED_COMMAND);
return;
}
// Command data transfer
AllocateCmd(command_byte_count);
for (int i = 0; i < command_byte_count; i++) {
GetCmd()[i] = GetBuffer()[i];
}
SetLength(0);
Execute();
}
}
void ScsiController::Execute()
{
stringstream s;
s << "Controller is executing " << command_mapping.find(GetOpcode())->second.second << ", CDB $"
<< setfill('0') << hex;
for (int i = 0; i < BUS::GetCommandByteCount(static_cast<uint8_t>(GetOpcode())); i++) {
s << setw(2) << GetCmd(i);
}
logger.Debug(s.str());
// Initialization for data transfer
ResetOffset();
SetBlocks(1);
execstart = SysTimer::GetTimerLow();
// Discard pending sense data from the previous command if the current command is not REQUEST SENSE
if (GetOpcode() != scsi_command::eCmdRequestSense) {
SetStatus(status::GOOD);
}
int lun = GetEffectiveLun();
if (!HasDeviceForLun(lun)) {
if (GetOpcode() != scsi_command::eCmdInquiry && GetOpcode() != scsi_command::eCmdRequestSense) {
logger.Trace("Invalid LUN " + to_string(lun));
Error(sense_key::ILLEGAL_REQUEST, asc::INVALID_LUN);
return;
}
assert(HasDeviceForLun(0));
lun = 0;
}
// SCSI-2 4.4.3 Incorrect logical unit handling
if (GetOpcode() == scsi_command::eCmdInquiry && !HasDeviceForLun(lun)) {
logger.Trace("Reporting LUN" + to_string(GetEffectiveLun()) + " as not supported");
GetBuffer().data()[0] = 0x7f;
return;
}
auto device = GetDeviceForLun(lun);
// Discard pending sense data from the previous command if the current command is not REQUEST SENSE
if (GetOpcode() != scsi_command::eCmdRequestSense) {
device->SetStatusCode(0);
}
if (device->CheckReservation(initiator_id, GetOpcode(), GetCmd(4) & 0x01)) {
try {
device->Dispatch(GetOpcode());
}
catch(const scsi_exception& e) {
Error(e.get_sense_key(), e.get_asc());
}
}
else {
Error(sense_key::ABORTED_COMMAND, asc::NO_ADDITIONAL_SENSE_INFORMATION, status::RESERVATION_CONFLICT);
}
}
void ScsiController::Status()
{
if (!IsStatus()) {
// Minimum execution time
// TODO Why is a delay needed? Is this covered by the SCSI specification?
if (execstart > 0) {
Sleep();
} else {
SysTimer::SleepUsec(5);
}
stringstream s;
s << "Status Phase, status is $" << setfill('0') << setw(2) << hex << static_cast<int>(GetStatus());
logger.Trace(s.str());
SetPhase(phase_t::status);
// Signal line operated by the target
GetBus().SetMSG(false);
GetBus().SetCD(true);
GetBus().SetIO(true);
// Data transfer is 1 byte x 1 block
ResetOffset();
SetLength(1);
SetBlocks(1);
GetBuffer()[0] = (uint8_t)GetStatus();
return;
}
Send();
}
void ScsiController::MsgIn()
{
if (!IsMsgIn()) {
logger.Trace("Message In phase");
SetPhase(phase_t::msgin);
GetBus().SetMSG(true);
GetBus().SetCD(true);
GetBus().SetIO(true);
ResetOffset();
return;
}
Send();
}
void ScsiController::MsgOut()
{
if (!IsMsgOut()) {
logger.Trace("Message Out phase");
// process the IDENTIFY message
if (IsSelection()) {
scsi.atnmsg = true;
scsi.msc = 0;
scsi.msb = {};
}
SetPhase(phase_t::msgout);
GetBus().SetMSG(true);
GetBus().SetCD(true);
GetBus().SetIO(false);
// Data transfer is 1 byte x 1 block
ResetOffset();
SetLength(1);
SetBlocks(1);
return;
}
Receive();
}
void ScsiController::DataIn()
{
if (!IsDataIn()) {
// Minimum execution time
if (execstart > 0) {
Sleep();
}
// If the length is 0, go to the status phase
if (!HasValidLength()) {
Status();
return;
}
logger.Trace("Entering Data In phase");
SetPhase(phase_t::datain);
GetBus().SetMSG(false);
GetBus().SetCD(false);
GetBus().SetIO(true);
ResetOffset();
return;
}
Send();
}
void ScsiController::DataOut()
{
if (!IsDataOut()) {
// Minimum execution time
if (execstart > 0) {
Sleep();
}
// If the length is 0, go to the status phase
if (!HasValidLength()) {
Status();
return;
}
logger.Trace("Data Out phase");
SetPhase(phase_t::dataout);
// Signal line operated by the target
GetBus().SetMSG(false);
GetBus().SetCD(false);
GetBus().SetIO(false);
ResetOffset();
return;
}
Receive();
}
void ScsiController::Error(sense_key sense_key, asc asc, status status)
{
// Get bus information
GetBus().Acquire();
// Reset check
if (GetBus().GetRST()) {
Reset();
GetBus().Reset();
return;
}
// Bus free for status phase and message in phase
if (IsStatus() || IsMsgIn()) {
BusFree();
return;
}
int lun = GetEffectiveLun();
if (!HasDeviceForLun(lun) || asc == asc::INVALID_LUN) {
if (!HasDeviceForLun(0)) {
logger.Error("No LUN 0");
SetStatus(status);
SetMessage(0x00);
Status();
return;
}
lun = 0;
}
if (sense_key != sense_key::NO_SENSE || asc != asc::NO_ADDITIONAL_SENSE_INFORMATION) {
stringstream s;
s << setfill('0') << setw(2) << hex << "Error status: Sense Key $" << static_cast<int>(sense_key)
<< ", ASC $" << static_cast<int>(asc);
logger.Debug(s.str());
// Set Sense Key and ASC for a subsequent REQUEST SENSE
GetDeviceForLun(lun)->SetStatusCode((static_cast<int>(sense_key) << 16) | (static_cast<int>(asc) << 8));
}
SetStatus(status);
SetMessage(0x00);
logger.Trace("Error (to status phase)");
Status();
}
void ScsiController::Send()
{
assert(!GetBus().GetREQ());
assert(GetBus().GetIO());
if (HasValidLength()) {
logger.Trace("Sending data, offset: " + to_string(GetOffset()) + ", length: " + to_string(GetLength()));
// The delay should be taken from the respective LUN, but as there are no Daynaport drivers for
// LUNs other than 0 this work-around works.
if (const int len = GetBus().SendHandShake(GetBuffer().data() + GetOffset(), GetLength(),
HasDeviceForLun(0) ? GetDeviceForLun(0)->GetSendDelay() : 0);
len != static_cast<int>(GetLength())) {
// If you cannot send all, move to status phase
Error(sense_key::ABORTED_COMMAND);
return;
}
UpdateOffsetAndLength();
return;
}
DecrementBlocks();
bool result = true;
// Processing after data collection (read/data-in only)
if (IsDataIn() && GetBlocks() != 0) {
// set next buffer (set offset, length)
result = XferIn(GetBuffer());
logger.Trace("Processing after data collection. Blocks: " + to_string(GetBlocks()));
}
// If result FALSE, move to status phase
if (!result) {
Error(sense_key::ABORTED_COMMAND);
return;
}
// Continue sending if block !=0
if (GetBlocks() != 0){
logger.Trace("Continuing to send. Blocks: " + to_string(GetBlocks()));
assert(HasValidLength());
assert(GetOffset() == 0);
return;
}
// Move to next phase
logger.Trace("Moving to next phase: " + string(BUS::GetPhaseStrRaw(GetPhase())));
switch (GetPhase()) {
// Message in phase
case phase_t::msgin:
// Completed sending response to extended message of IDENTIFY message
if (scsi.atnmsg) {
// flag off
scsi.atnmsg = false;
// command phase
Command();
} else {
// Bus free phase
BusFree();
}
break;
// Data-in Phase
case phase_t::datain:
// status phase
Status();
break;
// status phase
case phase_t::status:
// Message in phase
SetLength(1);
SetBlocks(1);
GetBuffer()[0] = (uint8_t)GetMessage();
MsgIn();
break;
default:
assert(false);
break;
}
}
void ScsiController::Receive()
{
assert(!GetBus().GetREQ());
assert(!GetBus().GetIO());
if (HasValidLength()) {
logger.Trace("Receiving data, transfer length: " + to_string(GetLength()) + " byte(s)");
// If not able to receive all, move to status phase
if (uint32_t len = GetBus().ReceiveHandShake(GetBuffer().data() + GetOffset(), GetLength()); len != GetLength()) {
logger.Error("Not able to receive " + to_string(GetLength()) + " byte(s) of data, only received "
+ to_string(len));
Error(sense_key::ABORTED_COMMAND);
return;
}
}
if (IsByteTransfer()) {
ReceiveBytes();
return;
}
if (HasValidLength()) {
UpdateOffsetAndLength();
return;
}
DecrementBlocks();
bool result = true;
// Processing after receiving data (by phase)
logger.Trace("Phase: " + string(BUS::GetPhaseStrRaw(GetPhase())));
switch (GetPhase()) {
case phase_t::dataout:
if (GetBlocks() == 0) {
// End with this buffer
result = XferOut(false);
} else {
// Continue to next buffer (set offset, length)
result = XferOut(true);
}
break;
case phase_t::msgout:
SetMessage(GetBuffer()[0]);
if (!XferMsg(GetMessage())) {
// Immediately free the bus if message output fails
BusFree();
return;
}
// Clear message data in preparation for message-in
SetMessage(0x00);
break;
default:
break;
}
// If result FALSE, move to status phase
if (!result) {
Error(sense_key::ABORTED_COMMAND);
return;
}
// Continue to receive if block != 0
if (GetBlocks() != 0) {
assert(HasValidLength());
assert(GetOffset() == 0);
return;
}
// Move to next phase
switch (GetPhase()) {
case phase_t::command:
ProcessCommand();
break;
case phase_t::msgout:
ProcessMessage();
break;
case phase_t::dataout:
// Block-oriented data have been handled above
DataOutNonBlockOriented();
Status();
break;
default:
assert(false);
break;
}
}
bool ScsiController::XferMsg(int msg)
{
assert(IsMsgOut());
// Save message out data
if (scsi.atnmsg) {
scsi.msb[scsi.msc] = (uint8_t)msg;
scsi.msc++;
scsi.msc %= 256;
}
return true;
}
void ScsiController::ReceiveBytes()
{
if (HasValidLength()) {
SetBytesToTransfer(GetLength());
UpdateOffsetAndLength();
return;
}
bool result = true;
// Processing after receiving data (by phase)
logger.Trace("Phase: " + string(BUS::GetPhaseStrRaw(GetPhase())));
switch (GetPhase()) {
case phase_t::dataout:
result = XferOut(false);
break;
case phase_t::msgout:
SetMessage(GetBuffer()[0]);
if (!XferMsg(GetMessage())) {
// Immediately free the bus if message output fails
BusFree();
return;
}
// Clear message data in preparation for message-in
SetMessage(0x00);
break;
default:
break;
}
// If result FALSE, move to status phase
if (!result) {
Error(sense_key::ABORTED_COMMAND);
return;
}
// Move to next phase
switch (GetPhase()) {
case phase_t::command:
ProcessCommand();
break;
case phase_t::msgout:
ProcessMessage();
break;
case phase_t::dataout:
Status();
break;
default:
assert(false);
break;
}
}
bool ScsiController::XferOut(bool cont)
{
assert(IsDataOut());
if (!IsByteTransfer()) {
return XferOutBlockOriented(cont);
}
const uint32_t count = GetBytesToTransfer();
SetByteTransfer(false);
auto device = GetDeviceForLun(GetEffectiveLun());
return device != nullptr ? device->WriteByteSequence(GetBuffer(), count) : false;
}
void ScsiController::DataOutNonBlockOriented()
{
assert(IsDataOut());
switch (GetOpcode()) {
// TODO Check why these cases are needed
case scsi_command::eCmdWrite6:
case scsi_command::eCmdWrite10:
case scsi_command::eCmdWrite16:
case scsi_command::eCmdWriteLong10:
case scsi_command::eCmdWriteLong16:
case scsi_command::eCmdVerify10:
case scsi_command::eCmdVerify16:
break;
case scsi_command::eCmdModeSelect6:
case scsi_command::eCmdModeSelect10: {
if (auto device = dynamic_pointer_cast<ModePageDevice>(GetDeviceForLun(GetEffectiveLun()));
device != nullptr) {
device->ModeSelect(GetOpcode(), GetCmd(), GetBuffer(), GetOffset());
}
else {
throw scsi_exception(sense_key::ILLEGAL_REQUEST, asc::INVALID_COMMAND_OPERATION_CODE);
}
}
break;
case scsi_command::eCmdSetMcastAddr:
// TODO: Eventually, we should store off the multicast address configuration data here...
break;
default:
stringstream s;
s << "Unexpected Data Out phase for command $" << setfill('0') << setw(2) << hex
<< static_cast<int>(GetOpcode());
logger.Warn(s.str());
break;
}
}
//---------------------------------------------------------------------------
//
// Data transfer IN
// *Reset offset and length
//
//---------------------------------------------------------------------------
bool ScsiController::XferIn(vector<uint8_t>& buf)
{
assert(IsDataIn());
stringstream s;
s << "Command: $" << setfill('0') << setw(2) << hex << static_cast<int>(GetOpcode());
logger.Trace(s.str());
int lun = GetEffectiveLun();
if (!HasDeviceForLun(lun)) {
return false;
}
// Limited to read commands
switch (GetOpcode()) {
case scsi_command::eCmdRead6:
case scsi_command::eCmdRead10:
case scsi_command::eCmdRead16:
// Read from disk
try {
SetLength(dynamic_pointer_cast<Disk>(GetDeviceForLun(lun))->Read(GetCmd(), buf, GetNext()));
}
catch(const scsi_exception&) {
// If there is an error, go to the status phase
return false;
}
IncrementNext();
// If things are normal, work setting
ResetOffset();
break;
default:
assert(false);
return false;
}
return true;
}
//---------------------------------------------------------------------------
//
// Data transfer OUT
// *If cont=true, reset the offset and length
//
// TODO Try to use less casts
//
//---------------------------------------------------------------------------
bool ScsiController::XferOutBlockOriented(bool cont)
{
auto device = GetDeviceForLun(GetEffectiveLun());
// Limited to write commands
switch (GetOpcode()) {
case scsi_command::eCmdModeSelect6:
case scsi_command::eCmdModeSelect10:
{
auto mode_page_device = dynamic_pointer_cast<ModePageDevice>(device);
if (mode_page_device == nullptr) {
return false;
}
try {
mode_page_device->ModeSelect(GetOpcode(), GetCmd(), GetBuffer(), GetOffset());
}
catch(const scsi_exception& e) {
Error(e.get_sense_key(), e.get_asc());
return false;
}
break;
}
case scsi_command::eCmdWrite6:
case scsi_command::eCmdWrite10:
case scsi_command::eCmdWrite16:
// TODO Verify has to verify, not to write
case scsi_command::eCmdVerify10:
case scsi_command::eCmdVerify16:
{
// Special case for SCBR and SCDP
if (auto byte_writer = dynamic_pointer_cast<ByteWriter>(device); byte_writer) {
if (!byte_writer->WriteBytes(GetCmd(), GetBuffer(), GetLength())) {
return false;
}
ResetOffset();
break;
}
auto disk = dynamic_pointer_cast<Disk>(device);
if (disk == nullptr) {
return false;
}
try {
disk->Write(GetCmd(), GetBuffer(), GetNext() - 1);
}
catch(const scsi_exception& e) {
Error(e.get_sense_key(), e.get_asc());
return false;
}
// If you do not need the next block, end here
IncrementNext();
if (!cont) {
break;
}
SetLength(disk->GetSectorSizeInBytes());
ResetOffset();
break;
}
case scsi_command::eCmdSetMcastAddr:
logger.Trace("Done with DaynaPort Set Multicast Address");
break;
default:
stringstream s;
s << "Received an unexpected command ($" << setfill('0') << setw(2) << hex
<< static_cast<int>(GetOpcode()) << ")";
logger.Warn(s.str());
break;
}
return true;
}
void ScsiController::ProcessCommand()
{
uint32_t len = GPIOBUS::GetCommandByteCount(GetBuffer()[0]);
stringstream s;
s << "CDB=$" << setfill('0') << setw(2) << hex;
for (uint32_t i = 0; i < len; i++) {
GetCmd()[i] = GetBuffer()[i];
s << GetCmd(i);
}
logger.Trace(s.str());
Execute();
}
void ScsiController::ParseMessage()
{
int i = 0;
while (i < scsi.msc) {
const uint8_t message_type = scsi.msb[i];
if (message_type == 0x06) {
logger.Trace("Received ABORT message");
BusFree();
return;
}
if (message_type == 0x0C) {
logger.Trace("Received BUS DEVICE RESET message");
scsi.syncoffset = 0;
if (auto device = GetDeviceForLun(identified_lun); device != nullptr) {
device->DiscardReservation();
}
BusFree();
return;
}
if (message_type >= 0x80) {
identified_lun = static_cast<int>(message_type) & 0x1F;
logger.Trace("Received IDENTIFY message for LUN " + to_string(identified_lun));
}
if (message_type == 0x01) {
logger.Trace("Received EXTENDED MESSAGE");
// Check only when synchronous transfer is possible
if (!scsi.syncenable || scsi.msb[i + 2] != 0x01) {
SetLength(1);
SetBlocks(1);
GetBuffer()[0] = 0x07;
MsgIn();
return;
}
scsi.syncperiod = scsi.msb[i + 3];
if (scsi.syncperiod > MAX_SYNC_PERIOD) {
scsi.syncperiod = MAX_SYNC_PERIOD;
}
scsi.syncoffset = scsi.msb[i + 4];
if (scsi.syncoffset > MAX_SYNC_OFFSET) {
scsi.syncoffset = MAX_SYNC_OFFSET;
}
// STDR response message generation
SetLength(5);
SetBlocks(1);
GetBuffer()[0] = 0x01;
GetBuffer()[1] = 0x03;
GetBuffer()[2] = 0x01;
GetBuffer()[3] = scsi.syncperiod;
GetBuffer()[4] = scsi.syncoffset;
MsgIn();
return;
}
// Next message
i++;
}
}
void ScsiController::ProcessMessage()
{
// Continue message out phase as long as ATN keeps asserting
if (GetBus().GetATN()) {
// Data transfer is 1 byte x 1 block
ResetOffset();
SetLength(1);
SetBlocks(1);
return;
}
if (scsi.atnmsg) {
ParseMessage();
}
// Initialize ATN message reception status
scsi.atnmsg = false;
Command();
}
int ScsiController::GetEffectiveLun() const
{
// Return LUN from IDENTIFY message, or return the LUN from the CDB as fallback
return identified_lun != -1 ? identified_lun : GetLun();
}
void ScsiController::Sleep()
{
if (const uint32_t time = SysTimer::GetTimerLow() - execstart; time < MIN_EXEC_TIME) {
SysTimer::SleepUsec(MIN_EXEC_TIME - time);
}
execstart = 0;
}