RASCSI/cpp/hal/gpiobus_bananam2p.h
akuker 09ba19a24f
Optimize setting the data gpio bits (#1022)
Co-authored-by: Tony Kuker <akuker@gmail.com>
2022-12-07 11:09:30 -06:00

205 lines
5.4 KiB
C++

//---------------------------------------------------------------------------
//
// SCSI Target Emulator PiSCSI
// for Raspberry Pi
//
// Powered by XM6 TypeG Technology.
// Copyright (C) 2016-2020 GIMONS
// [ GPIO-SCSI bus ]
//
//---------------------------------------------------------------------------
#pragma once
#include "hal/data_sample_bananam2p.h"
#include "hal/gpiobus.h"
#include "hal/pi_defs/bpi-gpio.h"
#include "hal/sbc_version.h"
#include "hal/sunxi_utils.h"
#include "shared/log.h"
#include "shared/scsi.h"
#include <map>
//---------------------------------------------------------------------------
//
// Class definition
//
//---------------------------------------------------------------------------
class GPIOBUS_BananaM2p : public GPIOBUS
{
public:
// Basic Functions
GPIOBUS_BananaM2p() = default;
~GPIOBUS_BananaM2p() override = default;
// Destructor
bool Init(mode_e mode = mode_e::TARGET) override;
void Cleanup() override;
void Reset() override;
//---------------------------------------------------------------------------
//
// Bus signal acquisition
//
//---------------------------------------------------------------------------
uint32_t Acquire() override;
void SetENB(bool ast) override;
// Set ENB signal
bool GetBSY() const override;
// Get BSY signal
void SetBSY(bool ast) override;
// Set BSY signal
bool GetSEL() const override;
// Get SEL signal
void SetSEL(bool ast) override;
// Set SEL signal
bool GetATN() const override;
// Get ATN signal
void SetATN(bool ast) override;
// Set ATN signal
bool GetACK() const override;
// Get ACK signal
void SetACK(bool ast) override;
// Set ACK signal
bool GetACT() const override;
// Get ACT signal
void SetACT(bool ast) override;
// Set ACT signal
bool GetRST() const override;
// Get RST signal
void SetRST(bool ast) override;
// Set RST signal
bool GetMSG() const override;
// Get MSG signal
void SetMSG(bool ast) override;
// Set MSG signal
bool GetCD() const override;
// Get CD signal
void SetCD(bool ast) override;
// Set CD signal
bool GetIO() override;
// Get IO signal
void SetIO(bool ast) override;
// Set IO signal
bool GetREQ() const override;
// Get REQ signal
void SetREQ(bool ast) override;
// Set REQ signal
bool GetDP() const override;
uint8_t GetDAT() override;
// Get DAT signal
void SetDAT(uint8_t dat) override;
// Set DAT signal
bool WaitREQ(bool ast) override
{
return WaitSignal(BPI_PIN_REQ, ast);
}
bool WaitACK(bool ast) override
{
return WaitSignal(BPI_PIN_ACK, ast);
}
// TODO: Restore these back to protected
// protected:
// SCSI I/O signal control
void MakeTable() override;
// Create work data
void SetControl(int pin, bool ast) override;
// Set Control Signal
void SetMode(int pin, int mode) override;
// Set SCSI I/O mode
int GetMode(int pin) override;
inline bool GetSignal(int pin) const override;
// Set SCSI output signal value
void SetSignal(int pin, bool ast) override;
// Interrupt control
// IRQ Disabled
void DisableIRQ() override;
// IRQ Enabled
void EnableIRQ() override;
// GPIO pin functionality settings
void PinConfig(int pin, int mode) override;
// GPIO pin direction setting
void PullConfig(int pin, int mode) override;
// GPIO pin pull up/down resistor setting
void PinSetSignal(int pin, bool ast) override;
// Set GPIO output signal
void DrvConfig(uint32_t drive) override;
// Set GPIO drive strength
unique_ptr<DataSample> GetSample(uint64_t timestamp) override
{
Acquire();
return make_unique<DataSample_BananaM2p>(signals, timestamp);
}
bool SetupSelEvent();
volatile uint32_t *gpio_map = nullptr;
// Timer control register
volatile uint32_t *tmr_ctrl;
array<uint32_t, 12> signals = {0}; // All bus signals
int sunxi_setup(void);
void sunxi_set_pullupdn(int gpio, int pud);
void sunxi_setup_gpio(int gpio, int direction, int pud);
void sunxi_output_gpio(int gpio, int value);
int sunxi_input_gpio(int gpio) const;
int bpi_found = -1;
volatile SunXI::sunxi_gpio_reg_t *pio_map;
volatile SunXI::sunxi_gpio_reg_t *r_pio_map;
volatile uint32_t *r_gpio_map;
uint8_t *gpio_mmap_reg;
uint32_t sunxi_capture_all_gpio();
void set_pullupdn(int gpio, int pud);
// These definitions are from c_gpio.c and should be removed at some point!!
const int SETUP_OK = 0;
SBC_Version::sbc_version_type sbc_version;
static const array<int, 19> SignalTable;
void InitializeGpio();
std::vector<int> gpio_banks;
// Note: These MUST be in order from bit 0 to bit 7 with parity as the last item in the array
const array<int, 9> pintbl = {BPI_PIN_DT0, BPI_PIN_DT1, BPI_PIN_DT2, BPI_PIN_DT3, BPI_PIN_DT4,
BPI_PIN_DT5, BPI_PIN_DT6, BPI_PIN_DT7, BPI_PIN_DP};
void sunxi_set_all_gpios(array<uint32_t, 12> &mask, array<uint32_t, 12> &value);
array<uint32_t, 12> gpio_data_masks = {0};
#if defined(__x86_64__) || defined(__X86__) || defined(__aarch64__)
// The SEL_EVENT functions need to do something to prevent SonarCloud from
// claiming they should be const
int dummy_var = 0;
#endif
};