mirror of
https://github.com/akuker/RASCSI.git
synced 2024-11-27 04:49:18 +00:00
83 lines
3.2 KiB
Plaintext
83 lines
3.2 KiB
Plaintext
!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
|
||
!! ------ The native file is rascsi.1. Re-run 'make docs' after updating
|
||
|
||
|
||
rascsi(1) General Commands Manual rascsi(1)
|
||
|
||
NAME
|
||
rascsi - Emulates SCSI devices using the Raspberry Pi GPIO pins
|
||
|
||
SYNOPSIS
|
||
rascsi [-IDn file] [-HDn file]...
|
||
|
||
DESCRIPTION
|
||
rascsi Emulates SCSI devices using the Raspberry Pi GPIO pins.
|
||
|
||
In the arguments to RaSCSI, one or more SCSI (-IDn) or SASI (-HDn) de‐
|
||
vices can be specified. The number (n) after the ID or HD identifier
|
||
specifies the ID number for that device. For SCSI: The ID is limited
|
||
from 0-7. However, typically SCSI ID 7 is reserved for the "initiator"
|
||
(the host computer).Note that SASI is considered rare and only used on
|
||
very early Sharp X68000 computers.
|
||
|
||
RaSCSI will determine the type of device based upon the file extension
|
||
of the FILE argument.
|
||
hdf: SASI Hard Disk image (XM6 SASI HD image - typically only used
|
||
with X68000)
|
||
hds: SCSI Hard Disk image (XM6 SCSI HD image - typically only used
|
||
with X68000)
|
||
hdn: SCSI Hard Disk image (NEC GENUINE)
|
||
hdi: SCSI Hard Disk image (Anex86 HD image)
|
||
nhd: SCSI Hard Disk image (T98Next HD image)
|
||
hda: SCSI Hard Disk image (APPLE GENUINE - typically used with Mac
|
||
SCSI emulation)
|
||
mos: SCSI Magneto-optical image (XM6 SCSI MO image - typically only
|
||
used with X68000)
|
||
iso: SCSI CD-ROM image (ISO 9660 image)
|
||
|
||
For example, if you want to specify an Apple-compatible HD image on ID
|
||
0, you can use the following command:
|
||
sudo rascsi -ID0 /path/to/drive/hdimage.hda
|
||
|
||
Once RaSCSI starts, it will open a socket (port 6868) to allow external
|
||
management commands. If another process is using port 6868, RaSCSI
|
||
will terminate, since it is likely another instance of RaSCSI. Once
|
||
RaSCSI has initialized, the rasctl utility can be used to send com‐
|
||
mands.
|
||
|
||
To quit RaSCSI, press Control + C. If it is running in the background,
|
||
you can kill it using an INT signal.
|
||
|
||
OPTIONS
|
||
-IDn FILE
|
||
n is the SCSI ID number (0-7)
|
||
|
||
FILE is the name of the image file to attach to that ID.
|
||
|
||
-HDn FILE
|
||
n is the SASI ID number (0-15)
|
||
|
||
FILE is the name of the image file to attach to that ID.
|
||
|
||
Note: SASI usage is rare, and is typically limited to early
|
||
Sharp X68000 systems.
|
||
|
||
EXAMPLES
|
||
Launch RaSCSI with no emulated drives attached:
|
||
rascsi
|
||
|
||
Launch RaSCSI with an Apple hard drive image as ID0 and a CD-ROM as ID
|
||
2
|
||
rascsi -ID0 /path/to/harddrive.hda -ID2 /path/to/cdimage.iso
|
||
|
||
To create an empty, 100MB HD image, use the following command:
|
||
dd if=/dev/zero of=/path/to/newimage.hda bs=512 count=204800
|
||
|
||
SEE ALSO
|
||
rasctl(1), scsimon(1)
|
||
|
||
Full documentation is available at:
|
||
<https://www.github.com/akuker/RASCSI/wiki/>
|
||
|
||
rascsi(1)
|