RASCSI/doc/scsiloop.1

36 lines
1.2 KiB
Groff

.TH scsiloop 1
.SH NAME
scsiloop \- Tool for testing the RaSCSI board with a loopback adapter installed
.SH SYNOPSIS
.B scsiloop
[\fB\-L\fR \fILOG_LEVEL\fR]
.SH DESCRIPTION
.B scsiloop
Performs a self-test of the RaSCSI hardware to ensure that the board is functioning properly. In order for this tool to work, a special loopback cable MUST be attached to the RaSCSI SCSI connector.
In addition to testing the GPIO signals, scsiloop will perform a self-test of the hardware timers that are built into the system on a chip (SoC).
The loopback connections for the DB25 connector are shown here:
|Pin | Name | Pin | Name |
+----+------+-----+------+
| 1 | REQ | 13 | DB7 |
| 2 | MSG | 12 | DB6 |
| 3 | I/O | 11 | DB5 |
| 4 | RST | 10 | DB3 |
| 5 | ACK | 8 | DB0 |
| 6 | BSY | 20 | DBP |
| 15 | C/D | 23 | DB4 |
| 17 | ATN | 22 | DB2 |
| 19 | SEL | 21 | DB1 |
.SH OPTIONS
.TP
.BR \-L\fI " " \fILOG_LEVEL
The rascsi log level (trace, debug, info, warn, err, off). The default log level is 'info'.
.SH SEE ALSO
rasctl(1), rascsi(1), scsimon(1)
Full documentation is available at: <https://www.github.com/akuker/RASCSI/wiki/>