From 310b67da8f5f0e37ed78e35af58ea6587838d890 Mon Sep 17 00:00:00 2001 From: Uwe Seimet <48174652+uweseimet@users.noreply.github.com> Date: Wed, 15 Nov 2023 11:39:47 +0100 Subject: [PATCH] Updated Dayna Port SCSI Link (markdown) --- Dayna-Port-SCSI-Link.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Dayna-Port-SCSI-Link.md b/Dayna-Port-SCSI-Link.md index 1244caf..3d3c1d6 100644 --- a/Dayna-Port-SCSI-Link.md +++ b/Dayna-Port-SCSI-Link.md @@ -254,6 +254,7 @@ This is a matching ROUTE.TAB: 0.0.0.0 0.0.0.0 Ethernet0 10.10.20.1 ``` Note that STiNG does not support DHCP and thus requires a hard-coded IP address. Further be aware that the DaynaPort driver for STiNG does not support LUNs > 0. This in particular affects the internal host adapter of the MegaSTE, which only supports a single SCSI ID. On the one hand TOS can only boot from LUN 0, on the other hand the DaynaPort driver also requires the DaynaPort to be emulated for LUN 0. So with the MegaSTE's internal adapter you can either have a drive TOS can boot from, or a DaynaPort emulation, but not both. +It should not be a big deal to extend the DaynaPort driver with LUN support. On GitHub there is suitable [code for the Atari](https://github.com/uweseimet/atari_public/tree/main/PISCSI). # Troubleshooting and limitations - If the DaynaPort installer complains about a Network file in control panels you will need to use [ResEdit ](https://macintoshgarden.org/apps/resedit)to make that file visible, then move it out of the Control Panels folder and try the install again.